{"title":"Environment Controllers","description":"\u003ch2\u003eSmart Environment Controllers for Total Grow Room Control\u003c\/h2\u003e\n\u003ch3\u003eOne Controller, Whole-Room Automation\u003c\/h3\u003e\n\u003cp\u003eRun temperature, humidity, fans, CO₂ and lighting from a single unit. Flagships like the AC Infinity Controller AI+, VIVOSUN GrowHub E42A and Digi-Lumen Enviro-Pro replace a drawer full of timers and thermostats.\u003c\/p\u003e\n\u003ch3\u003eEnvironment Controllers for Every Setup\u003c\/h3\u003e\n\u003cp\u003eFrom a simple thermal-probe fan speed controller to full VPD control with 4-channel light dimming, there's a controller here matched to a single tent or a full room build.\u003c\/p\u003e\n\u003ch3\u003eGrower-Run Advice, Australian Stock\u003c\/h3\u003e\n\u003cp\u003e14 years of hands-on growing behind every recommendation. Tell us your tent, fan and light setup and we'll point you at the controller that actually fits — no upsell, no guesswork.\u003c\/p\u003e\n\u003cp\u003eBuild out the rest of your climate system: \u003ca href=\"\/collections\/fan-controllers\"\u003efan controllers\u003c\/a\u003e, \u003ca href=\"\/collections\/co2-controllers-monitors\"\u003eCO₂ controllers \u0026amp; monitors\u003c\/a\u003e, \u003ca href=\"\/collections\/environmental-monitors\"\u003eenvironmental monitors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/grow-room-environment-control\"\u003egrow room environment control\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003ch3\u003eDo I need an environment controller for a grow tent?\u003c\/h3\u003e\n\u003cp\u003eNo — a small tent can run on timers and a thermal fan controller, but an environment controller holds temperature and humidity automatically and pays for itself as your setup grows.\u003c\/p\u003e\n\u003ch3\u003eWhat does a grow room environment controller do?\u003c\/h3\u003e\n\u003cp\u003eAn environment controller monitors temperature, humidity and CO₂, then switches your fans, heaters, humidifiers and lights to hold your target conditions automatically.\u003c\/p\u003e\n\u003ch3\u003eCan environment controllers manage VPD?\u003c\/h3\u003e\n\u003cp\u003eYes — models like the AC Infinity Controller AI+ and Digi-Lumen Enviro-Pro calculate VPD from temperature and humidity and adjust connected gear to hold your target range.\u003c\/p\u003e\n\u003ch3\u003eWill a controller work with my existing gear?\u003c\/h3\u003e\n\u003cp\u003eYes, most controllers here switch standard plug-in gear through smart outlets, while UIS and GrowHub systems pair best with matching-brand fans. Unsure what fits? Ask us before you buy.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need an environment controller for a grow tent?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No — a small tent can run on timers and a thermal fan controller, but an environment controller holds temperature and humidity automatically and pays for itself as your setup grows.\"}},{\"@type\":\"Question\",\"name\":\"What does a grow room environment controller do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An environment controller monitors temperature, humidity and CO₂, then switches your fans, heaters, humidifiers and lights to hold your target conditions automatically.\"}},{\"@type\":\"Question\",\"name\":\"Can environment controllers manage VPD?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes — models like the AC Infinity Controller AI+ and Digi-Lumen Enviro-Pro calculate VPD from temperature and humidity and adjust connected gear to hold your target range.\"}},{\"@type\":\"Question\",\"name\":\"Will a controller work with my existing gear?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, most controllers here switch standard plug-in gear through smart outlets, while UIS and GrowHub systems pair best with matching-brand fans. Unsure what fits? Ask us before you buy.\"}}]}\u003c\/script\u003e","products":[{"product_id":"sigilventus-smart-controller-with-probe","title":"Smart EC Fan Controller with Thermal Probe by SigilVentus — Automated Temperature Fan Speed Control","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe SigilVentus Smart EC Fan Controller is the temperature brain for your SigilVentus EC fans. The included thermal probe reads your grow space in real time, and the controller trims fan speed across 6 levels to hold the temperature you set. It runs up to four EC fans at once, draws its power straight through the fan connection, and flags a fault the moment a fan stops pulling its weight.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eRuns Four Fans at Once\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eConnect and control up to four SigilVentus EC fans from one controller — intake and exhaust on the same brain.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Power Adaptor Needed\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePowered through the fan connection itself — no extra power cord, no spare wall socket sacrificed.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eThree Operating Modes\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAuto holds your set temperature, Manual gives you direct speed control, and Alarm alerts you when the room runs past your threshold.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eFan Fault Detection\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDetects which connected fan has stopped working and raises an alert — no silent failures cooking your tent.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eControl Input\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eTemperature (thermal probe included)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpeed Levels\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e6\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFan Capacity\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eUp to 4 EC fans simultaneously\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAuto, Manual, Alarm\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eDrawn through the fan connection — no adaptor required\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eLCD screen\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFan Compatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eSigilVentus EC fans\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.5rem; color: #2e5e2e;\"\u003eNot Sure What Size You Need?\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.93rem; line-height: 1.6; margin: 0 0 0.9rem;\"\u003eEnter your tent dimensions and get a matched fan size in seconds.\u003c\/p\u003e\n\u003ca href=\"\/pages\/fan-size-calculator\" style=\"background: #2e5e2e; color: #fff; padding: 0.6rem 1.4rem; border-radius: 6px; font-size: 0.95rem; font-weight: 700; text-decoration: none; display: inline-block;\"\u003eFan Size Calculator\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eThe Grow Guys Tips\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eConnect the controller before powering the fan — SigilVentus EC fans do not function without a speed control connection\u003c\/li\u003e\n\u003cli\u003ePosition the probe at canopy level, away from lights and out of the fan's direct airflow\u003c\/li\u003e\n\u003cli\u003eSet a low baseline speed in Auto Mode and let the controller ramp up only when the room warms — quieter running and less power drawn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003eConnect the controller to your SigilVentus EC fan (up to four) before powering up — the fans won't run without it.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003ePosition the thermal probe at canopy level, clear of lights and direct airflow.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eSet your target temperature and fan speed in Auto Mode, and an Alarm threshold if you want an over-temp warning.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eLet Auto Mode take over — the controller adjusts speed to hold your set temperature from here.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/products\/sigilventus-silenced-fan-smart-controlled\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSigilVentus Silenced Fan\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe acoustic-wrapped EC fan this controller is built to run — quiet extraction with smart speed control.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/sigilventus-mixed-flow-inline-fan-smart-controlled\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSigilVentus Inline Fan\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eLow-profile EC mixed-flow fan for duct runs — connects straight to this controller.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/sigilventus-carbon-filters\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSigilVentus Carbon Filters\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eComplete the ventilation chain — scrub odours while the controller manages airflow.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/sigilventus-smart-ec-fan-controller-pro\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSmart EC Fan Controller Pro\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe step-up model — adds humidity control, timing functions and air pressure adjustment.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eCommon Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it control humidity as well as temperature?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. This controller works from temperature only. If you want humidity-based control as well, step up to the SigilVentus Smart EC Fan Controller Pro, which reads both.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it need its own power supply?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It draws power through the fan connection — no additional power cord or adaptor is required.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan it run more than one fan?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. It connects and controls up to four SigilVentus EC fans at the same time.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with any inline fan?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It's designed for SigilVentus EC fans. AC fans and other brands' EC fans run from their own controllers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it tell me if a fan fails?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The controller detects which connected fan has stopped working and raises an alert.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eTake Temperature Off Your To-Do List\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eSet it once — the controller holds your temperature while you get on with growing.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/fan-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eBrowse Fan Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('49854820450602', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"SigilVentus","offers":[{"title":"Default Title","offer_id":49854820450602,"sku":"SG-S0538","price":135.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Smart-EC-Fan-Controller-with-Thermal-Probe-by-SigilVentus-Automated-Temperature-Fan-Speed-Control.png?v=1787635082"},{"product_id":"sigilventus-smart-ec-fan-controller-pro","title":"Smart EC Fan Controller Pro with Probe by SigilVentus — Automated Temp \u0026 Humidity Fan Speed Control","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe SigilVentus Smart EC Fan Controller Pro is the climate brain for your SigilVentus EC fans. The included probe reads temperature and humidity in your grow space, and the controller adjusts fan speed automatically to hold the conditions you set. Timing functions and differential air pressure adjustment round it out — set your targets once and let the room manage itself.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTemp and Humidity in One\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe Pro's probe reads both temperature and humidity — the step up from the standard thermal-only SigilVentus controller.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAuto-Control\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet your target conditions and the controller trims fan speed up and down to hold them — no daily dial-fiddling.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTiming Functions\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSchedule fan operation around your light cycle instead of running flat out around the clock.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAir Pressure Adjustment\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBuilt-in differential air pressure adjustment lets you balance intake and exhaust for stable airflow.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eControl Inputs\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eTemperature and humidity (probe included)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAuto-Control, Timing, Differential Air Pressure Adjustment\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFan Compatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eSigilVentus EC fans\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e0.44 kg\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.5rem; color: #2e5e2e;\"\u003eNot Sure What Size You Need?\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.93rem; line-height: 1.6; margin: 0 0 0.9rem;\"\u003eEnter your tent dimensions and get a matched fan size in seconds.\u003c\/p\u003e\n\u003ca href=\"\/pages\/fan-size-calculator\" style=\"background: #2e5e2e; color: #fff; padding: 0.6rem 1.4rem; border-radius: 6px; font-size: 0.95rem; font-weight: 700; text-decoration: none; display: inline-block;\"\u003eFan Size Calculator\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eThe Grow Guys Tips\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eConnect the controller before powering the fan — SigilVentus EC fans do not function without a speed control connection\u003c\/li\u003e\n\u003cli\u003ePosition the probe at canopy level, away from lights and out of the fan's direct airflow\u003c\/li\u003e\n\u003cli\u003eRunning slight negative pressure keeps odours moving through your carbon filter — the pressure adjustment makes that easy to dial in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003eConnect the controller to your SigilVentus EC fan before powering up — the fan won't run without it.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003ePosition the probe at canopy level, clear of lights and direct airflow.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eSet your target temperature and humidity, and any timing schedule you want.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eLet Auto-Control take over — the controller holds your set conditions from here.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/products\/sigilventus-silenced-fan-smart-controlled\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSigilVentus Silenced Fan\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe acoustic-wrapped EC fan this controller is built to run — quiet extraction with smart speed control.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/sigilventus-mixed-flow-inline-fan-smart-controlled\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSigilVentus Inline Fan\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eLow-profile EC mixed-flow fan for duct runs — pairs directly with the Pro controller.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/sigilventus-carbon-filters\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSigilVentus Carbon Filters\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eComplete the ventilation chain — scrub odours while the controller manages airflow.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eCommon Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it control humidity as well as temperature?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The Pro reads both temperature and humidity through its probe and regulates fan speed to hold your set conditions — that's the main step up from the standard SigilVentus thermal controller, which works from temperature only.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it come with the probe?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The temperature and humidity probe is included in the box.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with any inline fan?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It's designed for SigilVentus EC fans. AC fans and other brands' EC fans run from their own controllers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo SigilVentus fans run without a controller?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. SigilVentus EC fans do not function without a speed control connection — connect the controller before powering up the fan.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eRun Your Climate on Autopilot\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eSet your temp and humidity once — the Pro holds them while you get on with growing.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/fan-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eBrowse Fan Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('49854858756394', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"SigilVentus","offers":[{"title":"Default Title","offer_id":49854858756394,"sku":"SG-S1322","price":235.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Smart-EC-Fan-Controller-Pro-with-Probe-by-SigilVentus-Automated-Temp-Humidity-Fan-Speed-Control.png?v=1787635086"},{"product_id":"controller-ai-environmental-by-ac-infinity","title":"Controller AI+ Environmental by AC Infinity — AI-Powered Grow Room Automation","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe AC Infinity Controller AI+ is a flagship environmental grow room controller that uses onboard AI to learn your grow room's behaviour and automate fan speed, temperature, humidity, and scheduling based on actual conditions rather than fixed programmed values. It monitors all connected UIS devices in real time, builds a profile of your space over time, and makes proactive adjustments before conditions drift outside target — not after. For growers who want a fully automated environment that adapts as their grow does, this is the top of the AC Infinity stack.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAI-Powered Environment Learning\u003c\/strong\u003e \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe onboard AI profiles your grow room over time and makes proactive adjustments to maintain target conditions — adapting as your plants grow and environmental demands shift.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eFull UIS Ecosystem Control\u003c\/strong\u003e \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eControls all AC Infinity UIS-compatible devices from a single hub — fans, heaters, humidifiers, lights, and more, all managed together with coordinated logic.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTemperature, Humidity \u0026amp; VPD Targets\u003c\/strong\u003e \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet targets for temperature, humidity, and VPD separately for day and night periods — the AI manages all connected equipment to hold those targets simultaneously.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eApp Monitoring \u0026amp; Remote Control\u003c\/strong\u003e \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFull remote access via the AC Infinity app — monitor live conditions, adjust settings, receive alerts, and view historical data from anywhere.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 1.1rem; font-weight: bold; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eControl System\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAI-powered environment learning and automation\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eCompatible Devices\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAll AC Infinity UIS ecosystem products\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eMonitored Parameters\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eTemperature, humidity, VPD\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDay\/Night Programming\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eYes — separate targets for each period\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eWi-Fi — AC Infinity app (iOS \u0026amp; Android)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eRemote Access\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eYes — live data, alerts, and control via app\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eMains powered (AU plug)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAC Infinity\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eACAICON\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrower Tip\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eGive the AI a full week to profile your environment before expecting optimal results — it needs time to observe your space's thermal and humidity behaviour across multiple day\/night cycles before its adjustments become truly predictive.\u003c\/li\u003e\n\u003cli\u003eConnect all your UIS devices to the Controller AI+ from the start — the more equipment it has to work with, the more options it has to achieve and maintain your targets.\u003c\/li\u003e\n\u003cli\u003eSet realistic VPD targets that your equipment can actually achieve in your climate — asking the AI to hit targets beyond what your humidifier and fans can deliver will result in constant overcompensation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 1.1rem; font-weight: bold; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Use\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: bold; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConnect your UIS devices\u003c\/strong\u003e — Plug all AC Infinity UIS-compatible equipment into the Controller AI+ outlets and register them via the AC Infinity app.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: bold; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSet your environment targets\u003c\/strong\u003e — Configure your day and night targets for temperature, humidity, and VPD in the app. These are the parameters the AI works to maintain.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: bold; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLet the AI profile your space\u003c\/strong\u003e — Allow the controller to run for at least one full week. During this period it observes your room's behaviour and builds the profile it uses to make proactive adjustments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: bold; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMonitor via the app\u003c\/strong\u003e — Check live conditions and historical trends via the AC Infinity app. Review alerts and adjust targets as your grow progresses from veg to flower.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: bold; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eUpdate targets per growth stage\u003c\/strong\u003e — Adjust your temperature, humidity, and VPD targets as your plants move through veg and into flower where environmental requirements shift.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 1.1rem; font-weight: bold; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem; margin-top: 2rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\" href=\"\/collections\/inline-exhaust-fans\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline \u0026amp; Exhaust Fans\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAC Infinity Cloudline fans integrate natively with the Controller AI+ for fully automated speed control based on live conditions.\u003c\/p\u003e\n\u003c\/a\u003e\u003ca style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\" href=\"\/collections\/humidity-control\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eHumidity Control\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eConnect UIS-compatible humidifiers and dehumidifiers for fully automated RH management alongside fan and temperature control.\u003c\/p\u003e\n\u003c\/a\u003e\u003ca style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\" href=\"\/collections\/ac-infinity\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAll AC Infinity Products\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eBrowse the full AC Infinity UIS ecosystem — every compatible device the Controller AI+ can manage and automate.\u003c\/p\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 1.1rem; font-weight: bold; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat does the AI actually do differently from a standard controller?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eA standard controller reacts when conditions go outside your set range — it responds to problems. The Controller AI+ profiles your grow room's thermal and humidity behaviour over time and adjusts equipment proactively before conditions drift, rather than after. The result is more stable conditions with less oscillation around your targets.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it only work with AC Infinity equipment?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe AI and app integration work specifically with AC Infinity UIS ecosystem devices. Non-UIS equipment can be connected to standard switched outlets on the controller, but those devices will not benefit from the AI management and will only receive basic on\/off trigger control.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow long does the AI take to learn my grow room?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe AI begins optimising from day one but typically requires 5–7 days of continuous operation to fully profile your space's thermal and humidity behaviour across multiple day\/night cycles. Performance improves progressively over the first few weeks as the profile matures.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I still override the AI and make manual adjustments?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. You retain full manual control via the app and the on-device interface at all times. The AI operates within your programmed parameters — you set the targets and it works within them, but you can override, adjust, or disable AI management at any point.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the Controller AI+ worth it over a standard AC Infinity controller?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, if you are running a fully integrated UIS setup and want the most stable possible environment with minimal manual intervention. For growers running a single fan with basic temp triggers, a standard controller does the job. The AI+ delivers its full value when you have multiple UIS devices to coordinate and want proactive rather than reactive environment management.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eThe Smartest Grow Room Controller AC Infinity Makes.\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eController AI+ — AI-powered environment management that learns your grow room and automates your entire UIS setup. Set your targets and let it run.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\" id=\"btn-add-to-cart\"\u003eAdd to Cart\u003c\/button\u003e \u003ca style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\" href=\"\/collections\/ac-infinity\"\u003eView All AC Infinity\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50074890961194', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"AC Infinity","offers":[{"title":"Default Title","offer_id":50074890961194,"sku":"ACAICON","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Controller-AI-Environmental-by-AC-Infinity-AI-Powered-Grow-Room-Automation.webp?v=1776901388"},{"product_id":"co2-controller-by-ac-infinity","title":"CO2 Controller by AC Infinity — Automated CO2 Monitor \u0026 Dosing Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe AC Infinity CO2 Controller is a dedicated monitor and controller that automates CO2 delivery in your grow room based on live ppm readings. It reads current CO2 concentration, compares it to your programmed target, and triggers your CO2 equipment to dose or shut off accordingly — keeping the concentration in the sweet spot for accelerated growth without manual monitoring. If you are running CO2 supplementation, this is the tool that makes it actually work as intended rather than relying on timers and guesswork.\u003c\/p\u003e\n\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eLive CO2 ppm Monitoring\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eReads CO2 concentration continuously and displays current ppm on screen — so you always know what your plants are actually getting, not what you estimated.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAutomated Dosing Control\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTriggers your CO2 burner or tank regulator when ppm drops below target and cuts it when levels are reached — precise control without constant attendance.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eProgrammable Target Range\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet your ppm target and tolerance band. The controller manages everything within that range automatically — set it once and let it run.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSafety \u0026amp; Alarm Functions\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eHigh-CO2 alarm triggers if ppm exceeds a safe upper limit — an important safety feature for any sealed or semi-sealed grow room running CO2 enrichment.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\u003cstrong\u003eMeasurement\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eCO2 concentration (ppm)\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eSensor Type\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eNDIR CO2 sensor\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eControl Function\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eTriggers CO2 equipment on\/off based on ppm target\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eTarget Range\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eProgrammable — set ppm target and tolerance\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eAlarm\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eHigh-CO2 safety alarm\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eLive ppm readout\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eMains powered (AU plug)\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAC Infinity\u003c\/div\u003e\n    \u003cdiv\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eACCO2CON\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrower Tip\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eCO2 supplementation only benefits plants under high-intensity light — at lower PPFD levels, CO2 enrichment above ambient (around 400ppm) delivers little measurable return. Make sure your lighting can support enriched CO2 levels before investing in supplementation.\u003c\/li\u003e\n      \u003cli\u003ePosition the CO2 sensor at canopy height — CO2 is heavier than air and concentrations at the root zone differ from those at the canopy where plants actually absorb it.\u003c\/li\u003e\n      \u003cli\u003eDisable CO2 dosing during lights-off — plants do not photosynthesise in the dark and CO2 enrichment during this period is wasted and potentially unsafe.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Use\u003c\/h2\u003e\n\n  \u003cdiv\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the controller\u003c\/strong\u003e — Position the controller with the sensor at canopy height inside your sealed or semi-sealed grow room where CO2 is being enriched.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect your CO2 equipment\u003c\/strong\u003e — Plug your CO2 burner or tank regulator solenoid into the controller's outlet. The controller will trigger it on and off based on ppm readings.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSet your target ppm\u003c\/strong\u003e — Programme your target CO2 concentration (typically 1000–1500ppm for enriched grows) and your safety cutoff limit. Most crops respond well between 1000–1200ppm.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eLink to your light timer\u003c\/strong\u003e — Configure the controller to operate only during lights-on hours. CO2 dosing during dark periods is wasted and creates unnecessary safety risk.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMonitor and verify\u003c\/strong\u003e — Check the live ppm display periodically to confirm the system is maintaining your target range. Adjust your CO2 equipment output rate if levels are slow to reach target or overshoot frequently.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem; margin-top: 2rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePair CO2 control with automated fan, temperature, and humidity management for a fully automated grow room environment.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/environmental-monitors\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironmental Monitors\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMonitor temperature, humidity, and VPD alongside your CO2 levels for a complete picture of your grow room environment.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/ac-infinity\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAll AC Infinity Products\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eBrowse the full AC Infinity ecosystem — controllers, fans, and automation tools for your grow room.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need a sealed room to use CO2 supplementation?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, or close to it. CO2 enrichment only works when the room retains the enriched atmosphere long enough for plants to benefit. In a room with active air exchange to outdoors, CO2 is exhausted before concentration builds to useful levels. Reduce air exchange significantly or run a sealed environment for CO2 supplementation to deliver results.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat ppm target should I set for my grow?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eMost indoor growers target 1000–1500ppm for enriched environments under high-intensity lighting. Ambient CO2 is approximately 400ppm. Start at 1000ppm and monitor plant response before pushing higher — benefits plateau beyond 1500ppm for most crops.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs elevated CO2 dangerous in a grow room?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, at sufficient concentrations. CO2 above approximately 2000ppm causes headaches, dizziness, and at higher levels more serious symptoms in humans. The controller's high-CO2 alarm helps prevent dangerous accumulation — always ventilate fully before entering a room that has been running CO2 enrichment.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this controller work with both CO2 burners and tank setups?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The controller operates by triggering the connected equipment's power supply on and off based on ppm readings. It is compatible with CO2 burners (which plug in directly) and CO2 tank solenoid valves (which require a powered solenoid on the regulator).\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eShould I run CO2 during lights-off?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. Plants only use CO2 during photosynthesis, which requires light. Running CO2 during dark periods is wasted gas and creates unnecessary concentration build-up. Configure the controller to operate only during your lights-on hours.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eStop Guessing. Start Controlling.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eAC Infinity CO2 Controller — live ppm monitoring and automated dosing control for growers who take CO2 enrichment seriously.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/ac-infinity\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eView All AC Infinity\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50075316289834', 10), quantity: 1})\n    }).then(function(r){return r.json();}).then(function(data){\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart'; btn.style.background = '#2e5e2e';\n      setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#b67317'; }, 2000);\n    }).catch(function(){\n      btn.textContent = 'Error — Try Again'; btn.style.background = '#c0392b';\n      setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#b67317'; }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"AC Infinity","offers":[{"title":"Default Title","offer_id":50075316289834,"sku":"ACCO2CON","price":264.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/CO2-Controller-by-AC-Infinity-Automated-CO2-Monitor-Dosing-Controller.webp?v=1776901407"},{"product_id":"co-controller-ppm-b1-by-pro-leaf","title":"CO₂ Controller PPM-B1 by Pro Leaf – Precision CO₂ Regulation for Grow Rooms","description":"\u003ch2 data-pm-slice=\"1 1 []\" style=\"text-align: center;\"\u003e\u003cspan\u003e🧪 Precise CO₂ Control, Smarter Growth\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eMeet the \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCO₂ Controller PPM-B1 by Pro Leaf\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e – the smart and simple way to take full control of your grow room’s CO₂ levels. This digital controller manages any 240V CO₂-generating device and uses \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efuzzy logic\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to maintain consistent PPM without overshooting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eWith adjustable set points from \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e400 to 2000 PPM\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, built-in deadband control, and day\/night operation modes, this unit gives growers real-time data and automation to dial in their environment like a pro.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🔹 Key Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e💨 Controls 240V CO₂ devices with increase\/decrease modes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🔄 Adjustable CO₂ range: 400–2000 PPM\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e⚙️ Fuzzy logic algorithm for stable, accurate CO₂ delivery\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e📊 Accuracy of ±100 PPM with adjustable deadband\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🌗 Photocell sensor for day, night, or continuous mode\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🔌 Remote CO₂ sensor with 4.5m cable included\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e📈 Displays real-time PPM + records high\/low CO₂ levels\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e⚙️ How It Works\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePlug your CO₂ generator into the controller\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSet your desired PPM range and deadband\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eLet the fuzzy logic algorithm monitor \u0026amp; adjust CO₂ output\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePhotocell ensures CO₂ is only dispensed when needed (day\/night\/continuous)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRemote sensor feeds data back for real-time display and tracking\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🌱 Ideal For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSealed grow rooms\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eGrow tents with CO₂ supplementation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHydroponic or soil-based environments\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCommercial or advanced home growers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🌟 The Grow Guys Tips\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMount the sensor above canopy height for accurate readings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDon’t forget to set the deadband to prevent rapid cycling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePair with a CO₂ generator or tank + regulator for optimal results\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cspan\u003e🚀 Upgrade Your Atmosphere\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eSmarter plants start with smarter air. With \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePro Leaf PPM-B1\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, you’re one step closer to pro-level grow room performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003e🔍 Available now from The Grow Guys – for growers who don’t leave their climate to chance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pro-Leaf","offers":[{"title":"Default Title","offer_id":50309831262506,"sku":"PROLEAF-PPM-B1","price":625.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/CO2-Controller-PPM-B1-by-Pro-Leaf-Precision-CO2-Regulation-for-Grow-Rooms.png?v=1752733129"},{"product_id":"co-regulator-by-pro-leaf","title":"CO₂ Regulator by Pro Leaf – Precision Control for Grow Room CO₂ Tanks","description":"\u003ch2 data-pm-slice=\"1 1 []\" style=\"text-align: center;\"\u003e\u003cspan\u003e🛠️ Control Your CO₂, Control Your Grow\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCO₂ Regulator by Pro Leaf\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e offers a clean, reliable solution to manage CO₂ release from tanks into your grow space. Designed for use with CO₂ tanks, it features a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eprecision regulator, flow gauge, and industrial solenoid valve\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to ensure consistent, controlled enrichment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eIdeal for grow tents, greenhouses, and sealed grow rooms, this unit helps you dial in optimal CO₂ levels to boost plant metabolism, speed up growth, and maximise yield.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🔹 Key Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🔧 Precision CO₂ regulator with flow gauge\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e💨 Solenoid valve for accurate gas control\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e📏 0–30 L\/min adjustable flow meter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🌡️ Max input pressure: 150 MPa\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🔌 220V operation with USA standard 3-prong plug\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🌿 Includes 5m dispensing tubing\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🔗 Hose tail suits 4.2mm ID tubing\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e⚙️ How to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAttach securely to your CO₂ tank\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eConnect included tubing to your grow area’s CO₂ inlet or diffuser\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePlug into a timer or CO₂ controller (like the \u003c\/span\u003e\u003ca href=\"https:\/\/www.thegrowguys.com.au\/products\/co2-controller-by-ac-infinity\" title=\"CO₂ Controller by AC Infinity – Smart Climate Automation for Grow Tents\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCO₂ Controller by AC Infinity\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e) for automated dosing\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAdjust flow rate as required based on plant needs and space volume\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🌱 Ideal For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eGrow tents using CO₂ tanks\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSealed grow rooms\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eGreenhouses with supplemental CO₂\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIndoor hydroponic and soil systems\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🌟 The Grow Guys Tips\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAlways check for leaks before use using soapy water on connections\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFor best results, pair with a CO₂ controller like the \u003c\/span\u003e\u003ca href=\"https:\/\/www.thegrowguys.com.au\/products\/co-controller-ppm-b1-by-pro-leaf\" title=\"CO₂ Controller PPM-B1 by Pro Leaf – Digital Climate Control for Grow Rooms\"\u003e\u003cspan\u003e\u003cstrong\u003ePro Leaf PPM-B1\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eKeep tubing securely fastened to avoid CO₂ wastage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cspan\u003e🚀 Dial It In \u0026amp; Breathe Life Into Your Grow\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eTake the guesswork out of CO₂ delivery with the \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCO₂ Regulator by Pro Leaf\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e – everything you need to stay in control and keep your plants in the zone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003e🔍 Available now from The Grow Guys – powering serious grows with precision gear.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pro-Leaf","offers":[{"title":"Default Title","offer_id":50309881561386,"sku":"PROLEAF-CO2REG","price":180.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/CO2-Regulator-by-Pro-Leaf-Precision-Control-for-Grow-Room-CO2-Tanks.jpg?v=1752733134"},{"product_id":"fan-tastic-controller-with-probe","title":"Fan-Tastic 6.5A Smart Fan Controller with Temp Probe — Automatic Grow Room Climate Control","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe Fan-Tastic 6.5A Controller takes temperature management off your plate. Plug your fan into it, set a minimum fan speed and a target temperature, and the included probe reads the room while the controller adjusts fan speed to hold your set temp. Motion Flow software makes those speed changes smoothly instead of in hard jumps, so your fan runs quieter, draws less power, and lasts longer.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSet-and-Forget Temperature\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDial in your target temp once. The probe monitors the room and the controller trims fan speed up or down to hold it.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eQuieter Running Fans\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMotion Flow adjusts speed gradually rather than pulsing between settings — less hum, less drone from your extraction.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eLonger Fan Life\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSmooth speed changes and reduced power draw are easier on your fan motor than hard on-off cycling.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug and Play\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eNo wiring, no installer. Plug the fan into the controller, the controller into the wall, and set two dials.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eMax Load\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e6.5A \/ 1500W\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSensor\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eNTC temperature probe (included)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eThermostat-driven variable speed (Motion Flow)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eManual Mode\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eYes — works as a speed dimmer without the probe\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFan Compatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eSingle-phase AC fans\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDials\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eLeft: minimum fan speed \/ Right: target temperature\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003ePlug and play — no wiring\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eInitial Setup\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e5–10 minute automatic room scan\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.5rem; color: #2e5e2e;\"\u003eNot Sure What Size You Need?\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.93rem; line-height: 1.6; margin: 0 0 0.9rem;\"\u003eEnter your tent dimensions and get a matched fan size in seconds.\u003c\/p\u003e\n\u003ca href=\"\/pages\/fan-size-calculator\" style=\"background: #2e5e2e; color: #fff; padding: 0.6rem 1.4rem; border-radius: 6px; font-size: 0.95rem; font-weight: 700; text-decoration: none; display: inline-block;\"\u003eFan Size Calculator\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eThe Grow Guys Tips\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003ePosition the probe at canopy level, away from lights and out of the fan's direct airflow — probe placement makes or breaks the reading\u003c\/li\u003e\n\u003cli\u003eSMSCOM's manual recommends fans up to 5A (1000W) — larger fans can damage the unit despite the 6.5A rated ceiling\u003c\/li\u003e\n\u003cli\u003ePair with acoustic ducting if noise matters — a smooth-running fan plus insulated duct is about as quiet as extraction gets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003ePlug the controller into the wall, then plug your fan into the controller.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003eConnect the temperature probe and position it at canopy level, clear of direct airflow.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eSet your minimum fan speed on the left dial and your target temperature on the right dial.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eGive it 5–10 minutes to run its initial room scan. From there it holds your set temperature automatically.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline \u0026amp; Exhaust Fans\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eSingle-phase AC inline fans are exactly what this controller is built to run.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/odour-control-carbon-filters\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eOdour Control \u0026amp; Carbon Filters\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eKeep negative pressure and scrub smells while the controller manages airflow.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eCompare the full range if you need humidity or multi-device control as well.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eCommon Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it work without the temperature probe plugged in?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. Without the probe it runs as a manual speed dimmer using the left dial. The right (temperature) dial only becomes active once the probe is connected.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan it control EC or DC fans?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It's designed for single-phase AC fans only. EC fans such as the AC Infinity Cloudline range run from their own dedicated controllers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it make my fan quieter?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, in most setups. Motion Flow moves between speeds gradually rather than pulsing, which cuts the surging and drone you get from cruder dimmers, and lets you run the fan only as hard as the room needs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow long does setup take?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eMinutes. There's no wiring — plug in, set the two dials, and allow 5–10 minutes for the controller's initial room scan before it settles into automatic control.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eLet the Room Run Itself\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eStable temps, quieter fans, and one less thing to check every day.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/fan-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eBrowse Fan Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50333924557098', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"Fan-Tastic","offers":[{"title":"Default Title","offer_id":50333924557098,"sku":"FANT-CTRL-6.5A","price":165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Fan-Tastic-6_5A-Smart-Fan-Controller-with-Temp-Probe-Automatic-Grow-Room-Climate-Control.jpg?v=1787635207"},{"product_id":"thermostat-by-cultiv8-precision-heat-control-for-mats-rods-more","title":"Thermostat by Cultiv8 – Precision Heat Control for Mats, Rods \u0026 More","description":"\u003ch2 data-pm-slice=\"1 1 []\" style=\"text-align: center;\"\u003e\u003cspan\u003e🌡️ Dial in the Perfect Temperature\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eThermostat by Cultiv8\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e gives you total control over your heat mats, rods, and other heating elements. Designed for root zone temperature management, this digital thermostat makes propagation smarter and safer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eIts \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eplug-and-play\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e interface features a clear LED display, sensor probe, and precise \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003etemperature control between 20–42°C\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e (in 1° increments). Whether you’re sprouting seedlings or regulating an enclosure, you’ll never have to guess again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🔹 Key Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🌡️ Adjustable temperature range: 20°C to 42°C (or °F)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🔌 Controls any heating device under 1000W (4.3A max)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🧪 LED screen with real-time readout\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🧵 Compatible with heat mats, heat rods, heating pads, and more\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e🌱 Ideal for propagation trays, vivariums, and fermentation setups\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e⚠️ Auto safety shut-off for peace of mind\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e⚙️ Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInput Voltage: 230–240V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInput Frequency: 50\/60Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMax Load: 1000W\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMax Current: 4.3A\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eTemperature Range: 20°C–42°C (±1°C control)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDisplay: Celsius or Fahrenheit\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePlug Type: 3-prong grounded\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🌱 Ideal For\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eControlling heat mats \u0026amp; root zone temp in propagation trays\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHeating pads, rods, or enclosures for reptiles or pets\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBrewing\/fermentation projects that require warmth stability\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAnyone needing reliable, adjustable heat without constant monitoring\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan\u003e🌟 The Grow Guys Tips\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\" style=\"text-align: center;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePair with \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCultiv8 Heat Mats\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e for a complete seed-starting system\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMount the probe in the medium (not air) for best accuracy\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAlways check that your device doesn’t exceed 1000W max load\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cspan\u003e🚀 Take Control of the Heat\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003eWhether it’s roots, reptiles, or fermentation vessels - \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eThermostat by Cultiv8\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e gives you reliable, accurate warmth where and when you need it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003e🔍 Available now from The Grow Guys – because perfect temperatures grow perfect plants.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cultiv8","offers":[{"title":"Default Title","offer_id":50334062739754,"sku":"CULTIV8-THERMO","price":47.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Thermostat-by-Cultiv8-Precision-Heat-Control-for-Mats-Rods-More.png?v=1752733197"},{"product_id":"uis-control-plug-by-ac-infinity","title":"UIS Control Plug by AC Infinity — Automate Heaters, Humidifiers \u0026 A\/Cs","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe UIS Control Plug connects outlet-powered equipment — humidifiers, heaters, dehumidifiers, A\/Cs, fans and heat mats — to your AC Infinity UIS controller so it switches on and off automatically with your climate triggers, timers, cycles and schedules. This updated version ships with an Australian power socket and Australian plug, so it works on the AU grid with no adapters. Pair it with a WiFi-enabled UIS controller and you can monitor and control the lot from your phone through the AC Infinity app, complete with data graphs and alert notifications.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAustralian Plug \u0026amp; Socket\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUpdated version built for the AU grid — plug straight in, no adapters needed.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAutomates Outlet Gear\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePuts humidifiers, heaters, dehumidifiers and A\/Cs under full UIS controller automation.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eControl From Your Phone\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePair with a WiFi UIS controller for app control, data graphs and alert notifications from anywhere.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e10-Foot UIS Cord Included\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eLong-reach cord gives you flexible placement between the plug and your controller.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat It Does\u003c\/h2\u003e\n\u003cp style=\"font-size: 0.95rem; line-height: 1.7; margin-bottom: 2rem;\"\u003eThe plug sits between your wall outlet and your equipment. Your UIS controller issues on and off commands, and the plug delivers or cuts power accordingly. That means gear with no smart features of its own — a basic humidifier, a heat mat, a portable A\/C — can now respond to temperature and humidity triggers, run on schedules and cycles, and join the rest of your UIS ecosystem. It connects to a CONTROLLER 69, CONTROLLER 69 WiFi or CONTROLLER 69 PRO via the included 10-foot UIS cord.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eEquipment Compatibility\u003c\/h2\u003e\n\u003cp style=\"font-size: 0.95rem; line-height: 1.7; margin-bottom: 1rem;\"\u003eOnly devices that automatically start running the moment they receive power are compatible. The plug controls equipment by cutting power or letting it pass through — so anything that needs a button press to start after being plugged in cannot be controlled. Common compatible equipment includes:\u003c\/p\u003e\n\u003cul style=\"margin: 0 0 2rem 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eHumidifiers\u003c\/li\u003e\n\u003cli\u003eDehumidifiers\u003c\/li\u003e\n\u003cli\u003eAir conditioning units\u003c\/li\u003e\n\u003cli\u003eHeaters\u003c\/li\u003e\n\u003cli\u003eVentilation and circulation fans\u003c\/li\u003e\n\u003cli\u003eGrow lights\u003c\/li\u003e\n\u003cli\u003eSeedling heat mats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAC Infinity Inc.\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAC-ADA3\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003ePlug Type\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAustralian plug and socket (updated version)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e100–240V AC\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e50\/60 Hz\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e1800W\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eCurrent Rating\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e15A\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e5.1 x 4.1 x 6.9 cm\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eControl plug, 10-foot UIS extension cord (M-M), wire tie\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e2 years (AC Infinity)\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrow Guys Tip\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eTest your gear first: plug it into a normal outlet, cut the power at the wall, then restore it. If it starts running again on its own, it will work with the Control Plug.\u003c\/li\u003e\n\u003cli\u003eMany digital heaters and A\/Cs reset to standby after a power cut — check for an auto-restart setting in your appliance before relying on it for climate control.\u003c\/li\u003e\n\u003cli\u003eThis plug requires a UIS controller to operate — it is not a standalone smart plug and won't function as a standard outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow To Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003ePlug the UIS Control Plug into a wall socket near the equipment you want to automate.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003ePlug your device into the Control Plug. The indicator light confirms power is flowing — make sure the device starts running on its own.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eConnect the included 10-foot UIS cord from the port on the plug to a UIS port on your controller, then program your triggers, timers and schedules from the controller or app.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eA UIS controller is required — the Control Plug takes its commands from one.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/humidity-control\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eHumidity Control\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eHumidifiers and dehumidifiers are the most common gear automated through this plug.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/air-conditioning-heating\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAir Conditioning \u0026amp; Heating\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePut heaters and portable A\/Cs on temperature triggers instead of running them flat out.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the UIS Control Plug work with Australian power outlets?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. This updated version ships with an Australian power socket and Australian plug, so no adapters are needed on the AU grid.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan it control any appliance?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. Only equipment that automatically starts running when it receives power is compatible. Devices that need a button press after being plugged in cannot be controlled by any outlet plug.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhich controllers does it work with?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eIt connects to AC Infinity UIS controllers, including the CONTROLLER 69, CONTROLLER 69 WiFi and CONTROLLER 69 PRO, via the included 10-foot UIS cord. WiFi models add phone app control, data graphs and alert notifications.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I use it as a standard smart plug on its own?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It requires a connected UIS controller to operate and is not intended for use as a standard outlet.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003ePut Your Whole Grow Room On Autopilot\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eAustralian plug version — connect your gear to your UIS controller and let the climate triggers do the work.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/environment-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop UIS Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50377819554090', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"AC Infinity","offers":[{"title":"Default Title","offer_id":50377819554090,"sku":"AC-ADA3","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/UIS-Control-Plug-by-AC-Infinity-Automate-Heaters-Humidifiers-ACs.webp?v=1787635217"},{"product_id":"uis-splitter-hub-4-port-by-ac-infinity","title":"UIS Splitter Hub 4-Port by AC Infinity — Run Four Devices From One Controller Port","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe UIS Splitter Hub 4-Port turns one controller port into four. Plug it into a UIS port on your Controller 69, 69 PRO, 69 PRO+ or AI+, and up to four same-type devices run off a single set of programming. Four CLOUDLINE fans ramping together, four LED panels dimming together, one schedule driving the lot. If you have run out of ports before you ran out of gear, this is the fix.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eFour Devices, One Program\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eOne set of triggers, timers and schedules distributed to every device on the hub. They move as one.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eStacks Three Tiers Deep\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eChain hubs into hubs across up to three tiers, supporting as many as 40 devices in one array.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eBuilt To Stay Put\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eHeavier-gauge cable and tight-tolerance UIS connectors, so a knock to the tent pole does not drop a device.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e1x UIS male in, 4x UIS female out\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eMax devices supported\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e40 across chained hubs\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eTiers\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eUp to 3\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e25.4 cm (10 in.)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e5.8 cm (2.28 in.)\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eController compatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eController 69, 69 PRO, 69 PRO+, AI+, and future UIS controllers\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eAI+ limitation\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eNo device-exclusive function control, such as clip fan oscillation or unique device identification\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNot compatible with\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRJ11\/12 Type-A and Type-B adapters\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eCords required\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eUIS male-to-male cords, included with most UIS devices\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eBefore you plug it in\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eKeep one device type per hub. Fans and lights on the same hub will both obey whichever program that port is running, which is rarely what you want.\u003c\/li\u003e\n\u003cli\u003eWant independent zones? Use a separate controller port with its own hub for each zone, not one hub split between them.\u003c\/li\u003e\n\u003cli\u003eThis hub shares programming. It does not add power, so every device still needs its own supply.\u003c\/li\u003e\n\u003cli\u003eLabel your cords at both ends the day you install it. Four identical black leads behind a tent is a problem for future you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow To Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003ePick the controller port you want to drive the group, and decide which devices belong in it. Same type only.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003ePlug the hub's male UIS end into that controller port.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eRun a UIS male-to-male cord from each female port on the hub to each device.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eNeed more than four? Plug a second hub into one of the female ports. You can go three tiers deep, up to 40 devices.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\u003cspan\u003eOpen the controller or app, set your program on that port, and check every device responds before you close the tent up.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem; margin-top: 2rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/collections\/ac-infinity-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAC Infinity Controllers\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe hub does nothing on its own. It needs a UIS controller driving the port.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline \u0026amp; Exhaust Fans\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe most common reason growers run out of ports. Four fans, one ramp curve.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/environment-accessories\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Accessories\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eExtension cords, sensor probes and the rest of the UIS connection kit.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eQuestions Growers Ask\u003c\/h2\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I run different device types on one hub?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The hub is designed for same-type devices. Every device on the hub receives the same programming from that one controller port, so mixing a fan with a light means both follow whichever settings that port is running.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it work with the Controller AI+?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, with one limitation. On the AI+ you lose device-exclusive function control, which covers things like clip fan oscillation and unique device identification. Standard on\/off, speed and scheduling all work normally.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I stack hubs to run more than four devices?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. Hubs chain into each other across up to three tiers, supporting up to 40 devices from one array. Every device in that array still follows the one program.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with my RJ11 or RJ12 lighting adapter?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The hub is not compatible with RJ11\/12 Type-A or Type-B adapters. If you are running dimming adapters, they need their own controller port.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eAre the connecting cords included?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. You use the UIS male-to-male cords that ship with most UIS devices. If you are short one, they are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the hub supply power to my devices?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It shares control signal and programming only. Every connected device still runs off its own power supply.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eOne Port. Four Devices. One Program.\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eStop juggling controller ports and get your gear moving together.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/ac-infinity\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop AC Infinity\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50377865298218', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"AC Infinity","offers":[{"title":"Default Title","offer_id":50377865298218,"sku":"AC-ADS7","price":44.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/UIS-Splitter-Hub-4-Port-by-AC-Infinity-Run-Four-Devices-From-One-Controller-Port.jpg?v=1787635225"},{"product_id":"uis-lighting-adapters-by-ac-infinity","title":"UIS Lighting Adapters by AC Infinity — Smart Control for Third-Party Grow Lights","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThese adapter dongles let an AC Infinity UIS controller drive a grow light that isn't an AC Infinity light. Pick the type that matches how your light dims — Type-A for RJ11\/RJ12 fixtures using PWM or 0-10V, Type-B for older RJ11\/RJ12 fixtures using resistor dimming, Type-D for wiring straight into the DIM+ and DIM- terminals on an LED driver. Once it's connected, your light joins the same schedules, light cycles and climate triggers as the rest of your UIS gear.\u003c\/p\u003e\n\n\u003cdiv style=\"background: #fdecea; border-left: 4px solid #c0392b; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #c0392b; display: block; margin-bottom: 0.5rem;\"\u003eCheck your light before you order\u003c\/strong\u003e\n\u003cspan style=\"font-size: 0.93rem; line-height: 1.6;\"\u003eThese adapters do not work with every grow light. Compatibility is decided by the specific model and its dimming method, not the brand. AC Infinity lists fixtures from Mars Hydro, Spider Farmer, HLG, ViparSpectra, Volt and Medic Grow among others, but not every model from those brands is supported. Find your light's dimming type in its manual first, then pick the matching adapter. If you are unsure, ask us before you buy.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"margin: 1.5rem 0 0;\"\u003e\n\u003cp style=\"font-size: 0.95rem; font-weight: 700; margin-bottom: 0.75rem; color: #1a1a1a;\"\u003eSelect Type\u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.75rem; flex-wrap: wrap; margin-bottom: 1.5rem;\"\u003e\n\u003cbutton data-variant-id=\"50377908945194\" style=\"padding: 0.6rem 1.4rem; border: 2px solid #2e5e2e; border-radius: 6px; background: #2e5e2e; color: #fff; font-size: 0.95rem; font-weight: 700; cursor: pointer;\"\u003eType-A\u003c\/button\u003e\n\u003cbutton data-variant-id=\"50377908977962\" style=\"padding: 0.6rem 1.4rem; border: 2px solid #2e5e2e; border-radius: 6px; background: #fff; color: #2e5e2e; font-size: 0.95rem; font-weight: 600; cursor: pointer;\"\u003eType-B\u003c\/button\u003e\n\u003cbutton data-variant-id=\"50377909010730\" style=\"padding: 0.6rem 1.4rem; border: 2px solid #2e5e2e; border-radius: 6px; background: #fff; color: #2e5e2e; font-size: 0.95rem; font-weight: 600; cursor: pointer;\"\u003eType-D\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eOne Ecosystem, Any Brand Of Light\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eYour third-party fixture runs off the same controller and the same schedule as your fans and humidifier.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eClimate-Triggered Dimming\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet the light to back off when the tent runs hot, instead of finding out the next morning.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eCovers Old And New Drivers\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePWM, 0-10V, resistor dimming or bare dimming wires — there is a type for each.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eType-A (AC-ADL7)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRJ11\/RJ12 fixtures with PWM or 0-10V dimmers. Includes a 10 ft RJ11\/RJ12 extension cable.\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eType-B (AC-ADL8)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRJ11\/RJ12 fixtures with resistor dimmers. Dongle length 25.4 cm (10 in.).\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eType-D (AC-ADL9)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eLED driver dimming wires via DIM+ \/ DIM- screw terminals, 0-10V protocol.\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eMale end\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eUIS\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFemale end\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRJ11\/RJ12 on Type-A and Type-B, screw terminal block on Type-D\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eController compatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eController 69, 69 PRO, 69 PRO+, Controller AI+\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eLighting adapters do not deliver power to the controller — a UIS device or UIS power adapter is required\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eBrand compatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eModel dependent. Includes fixtures from Mars Hydro, Spider Farmer, HLG, ViparSpectra, Volt and Medic Grow\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGetting it right first go\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eYour light's dimming method decides the type, not its brand or wattage. The manual will name it.\u003c\/li\u003e\n\u003cli\u003eType-D dimming wires are low voltage and usually purple and grey. Strip about 5 mm, DIM+ into the plus terminal, DIM- into the minus, and tighten the screws properly.\u003c\/li\u003e\n\u003cli\u003eKeep the controller firmware current or it may not recognise the adapter.\u003c\/li\u003e\n\u003cli\u003eWire one light and test the full dimming range before you commit the rest of the room to it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow To Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003eFind your light's dimming method in its manual: PWM, 0-10V, resistor, or bare dimming wires off the driver.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003eMatch it to a type: A for PWM or 0-10V over RJ11\/RJ12, B for resistor over RJ11\/RJ12, D for driver dimming wires.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eConnect the adapter to the light. Type-A and Type-B plug into the RJ port. Type-D lands the DIM+ and DIM- wires into the terminal block.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003ePlug the UIS end into a free port on your controller. Make sure the controller is drawing power from a UIS device or power adapter.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\u003cspan\u003eOpen the app, set your light cycle and any climate triggers, then run the dimmer from zero to full to confirm the light tracks it.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem; margin-top: 2rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/collections\/ac-infinity-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAC Infinity Controllers\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe adapter needs a UIS controller on the other end to do anything at all.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/grow-light-accessories\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Light Accessories \u0026amp; Tools\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eHangers, timers and the rest of the kit around your fixture.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/environment-accessories\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Accessories\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eUIS extension cords and power adapters, including the one that powers your controller.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eQuestions Growers Ask\u003c\/h2\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this work with any grow light?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. Compatibility comes down to the specific model and its dimming method. AC Infinity supports a long list of fixtures from brands like Mars Hydro, Spider Farmer, HLG, ViparSpectra, Volt and Medic Grow, but not every model within those brands. Check your light's manual for its dimming type before ordering, and ask us if it isn't clear.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhich type do I need?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eIt depends on how your light dims. Type-A suits RJ11\/RJ12 fixtures using PWM or 0-10V dimming. Type-B suits older RJ11\/RJ12 fixtures using resistor dimming. Type-D is for lights where you wire directly into the driver's DIM+ and DIM- control wires.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the adapter power my controller?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. Lighting adapters pass control signal only. Your controller still needs power from a connected UIS device such as a CLOUDLINE fan, or from a separate UIS power adapter. This catches people out when a controller is running lights and nothing else.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I run these through a UIS Splitter Hub?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The UIS Splitter Hub is not compatible with RJ11\/12 Type-A or Type-B adapters. Lighting adapters need their own port on the controller.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control more than one light from one adapter?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, if your lights support daisy-chaining. Link the fixtures using the manufacturer's own daisy-chain method, then run the adapter from the first light in the chain to your controller.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat do the Type-D dimming wires look like?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThey are the low-voltage control wires coming off the LED driver, commonly purple and grey, marked DIM+ and DIM- or similar. Strip roughly 5 mm of insulation, seat each wire in its matching terminal, and tighten the screws down firmly.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eBring Your Light Into The System\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003ePick your type, check your manual, and get it running.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/ac-infinity\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop AC Infinity\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n\n  var selectedVariantId = '50377908945194';\n\n  var typeBtns = document.querySelectorAll('button[data-variant-id]');\n  typeBtns.forEach(function(b) {\n    b.addEventListener('click', function() {\n      selectedVariantId = this.getAttribute('data-variant-id');\n      typeBtns.forEach(function(ob) {\n        ob.style.background = '#fff';\n        ob.style.color = '#2e5e2e';\n        ob.style.fontWeight = '600';\n      });\n      this.style.background = '#2e5e2e';\n      this.style.color = '#fff';\n      this.style.fontWeight = '700';\n    });\n  });\n\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt(selectedVariantId, 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"AC Infinity","offers":[{"title":"Type-A","offer_id":50377908945194,"sku":"AC-ADL7","price":47.95,"currency_code":"AUD","in_stock":true},{"title":"Type-B","offer_id":50377908977962,"sku":"AC-ADL8","price":45.95,"currency_code":"AUD","in_stock":true},{"title":"Type-D","offer_id":50377909010730,"sku":"AC-ADL9","price":32.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/UIS-Lighting-Adapters-by-AC-Infinity-Smart-Control-for-Third-Party-Grow-Lights.jpg?v=1787635231"},{"product_id":"smart-speed-controller-by-hvc-thermal-probe-included","title":"Smart Speed Controller by HVC — Automatic EC Fan Control, Thermal Probe Included","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe Smart Speed Controller by HVC is a wall-mounted thermostatic controller for Headwind HVC EC inline fans. Plug in up to four fans, set your target temperature, and it adjusts fan speed automatically as the room warms or cools — no power point required, because it draws power straight through the fan connection. The thermal probe is included in the box.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eRuns Four Fans at Once\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFour OUT ports control up to 4 EC fans simultaneously from one screen, connected with standard 3.5mm jack wires.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSet-and-Forget Auto Mode\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePick a target between 0–60°C and the controller steps fan speed up one level for every 2°C the room drifts over it.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Power Point Needed\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePowered directly through the connected fan — no cord, no adaptor, one less plug taken up in your tent.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eKnows When a Fan Fails\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eReads each fan's tachometer signal and beeps with an E1–E4 error code telling you exactly which port has the problem.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eFan capacity:\u003c\/strong\u003e Up to 4 EC fans\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eFan ports:\u003c\/strong\u003e OUT1–OUT4, 3.5mm jack\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eProbe:\u003c\/strong\u003e NTC thermal probe (included)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Via connected fan — no adaptor\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eModes:\u003c\/strong\u003e Auto, Manual, Temperature Alarm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSpeed levels:\u003c\/strong\u003e 6\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eAuto temp range:\u003c\/strong\u003e 0–60°C (32–140°F)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eFan failure alerts:\u003c\/strong\u003e E1–E4 per port\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eExtras:\u003c\/strong\u003e Button lock, night screen-off\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Wall bracket and screws\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.5rem; color: #2e5e2e;\"\u003eNot Sure What Size You Need?\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.93rem; margin: 0 0 0.8rem;\"\u003eEnter your tent dimensions and get a matched fan size in seconds.\u003c\/p\u003e\n\u003ca href=\"\/pages\/fan-size-calculator\" style=\"background: #2e5e2e; color: #fff; padding: 0.6rem 1.4rem; border-radius: 6px; font-size: 0.95rem; font-weight: 700; text-decoration: none; display: inline-block;\"\u003eFan Size Calculator\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrow Guys Tips\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eHang the probe at canopy height, out of the direct light beam — that's the temperature your plants actually feel.\u003c\/li\u003e\n\u003cli\u003eConnect fans to consecutive OUT ports starting from OUT1, and set fan-failure detection to match your fan count — a port flagged with no fan attached throws false alarms.\u003c\/li\u003e\n\u003cli\u003eWant the fans fully off once you hit target? Set the Auto mode baseline speed to 0. Baseline 1–3 keeps gentle airflow ticking over instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSetup in Four Steps\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cdiv\u003eFix the mounting bracket to the wall with the included screws and slide the controller onto it.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cdiv\u003ePlug the thermal probe into the NTC port, then connect your EC fans to OUT1 onward with the 3.5mm jack wires. The screen lights up as soon as the first fan is connected.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cdiv\u003eHold the MODE button for 3 seconds to switch between Auto (AUTO icon) and Manual (hand icon).\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cdiv\u003eIn Auto, set your target temperature with the arrows, then press MODE once more to set the baseline speed the fans hold once the target is reached.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/products\/inline-ec-fan-by-hvc-speed-controller-included\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline EC Fan by HVC\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe fan this controller is built for — quiet mixed flow extraction in three sizes.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/carbon-filters-by-hvc\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eCarbon Filters by HVC\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eComplete the extraction line with a matched long-life carbon filter.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/headwind-hvc-smart-ec-fan-controller-pro\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eSmart EC Fan Controller PRO\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eStep up to the PRO for humidity control on top of temperature.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFAQ\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the controller need its own power supply?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It draws power directly through the connected Headwind HVC EC fan — no power cord or adaptor is needed. The screen powers on once the probe and at least one fan are connected.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan it run more than one fan?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. It controls up to four EC fans at once through the OUT1–OUT4 ports, all following the same speed and temperature settings.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with any inline fan?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It's designed for Headwind HVC EC fans, which power the controller and accept its 3.5mm control connection. It won't drive standard AC fans.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it alert you if a fan stops working?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. Each fan sends a tachometer signal, and if one fails the controller beeps and displays an E1–E4 code showing which port has the fault. Enable detection only for the ports you're using.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the thermal probe optional?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The controller can't operate without a working thermal probe — it displays an \"Er\" message if the probe is disconnected. One is included in the box.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003ePut Your Extraction on Autopilot\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eOne controller, four fans, and a probe that does the thinking for you.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/fan-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eExplore Fan Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50385362583850', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"Headwind HVC","offers":[{"title":"Default Title","offer_id":50385362583850,"sku":"HVC-SPCTRL","price":99.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Smart-Speed-Controller-by-HVC-Automatic-EC-Fan-Control-Thermal-Probe-Included.png?v=1787635253"},{"product_id":"growhub-e25-controller-by-vivosun","title":"GrowHub E25 Controller by Vivosun – Smart Expansion Port for E42\/E42A","description":"\u003ch2 data-start=\"599\" data-end=\"659\" style=\"text-align: center;\"\u003e🌿 \u003cstrong data-start=\"605\" data-end=\"657\"\u003eLevel Up Your Grow Game Without Breaking a Sweat\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-start=\"661\" data-end=\"1070\" style=\"text-align: center;\"\u003e💬 Got a Vivosun Smart Grow System? The GrowHub E25 Controller is your plug-and-play sidekick that makes managing your grow tent as easy as checking your phone. Whether you’re syncing up with an E42\/E42A or running it solo, this compact powerhouse gives you WiFi control, smart scheduling, and the ability to run multiple SGS devices like AeroLight, AeroZesh, and AeroWave E – all without leaving the couch.\u003c\/p\u003e\n\u003chr data-start=\"1072\" data-end=\"1075\"\u003e\n\u003ch3 data-start=\"1077\" data-end=\"1102\" style=\"text-align: center;\"\u003e🔹 \u003cstrong data-start=\"1084\" data-end=\"1100\"\u003eKey Features\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"1104\" data-end=\"1194\" style=\"text-align: center;\"\u003e🔥 \u003cstrong data-start=\"1107\" data-end=\"1133\"\u003ePlug-and-play wizardry\u003c\/strong\u003e – Connect via Type-C, hit the WiFi button, and you’re off.\u003c\/p\u003e\n\u003cp data-start=\"1196\" data-end=\"1303\" style=\"text-align: center;\"\u003e🧪 \u003cstrong data-start=\"1199\" data-end=\"1223\"\u003eApp-controlled magic\u003c\/strong\u003e – Monitor, tweak, and fine-tune your grow from anywhere with the Vivosun App.\u003c\/p\u003e\n\u003cp data-start=\"1305\" data-end=\"1407\" style=\"text-align: center;\"\u003e📏 \u003cstrong data-start=\"1308\" data-end=\"1327\"\u003eExpansion beast\u003c\/strong\u003e – Sync multiple AeroLights or use as an extra port for your GrowHub E42\/E42A.\u003c\/p\u003e\n\u003chr data-start=\"1409\" data-end=\"1412\"\u003e\n\u003ch3 data-start=\"1414\" data-end=\"1441\" style=\"text-align: center;\"\u003e🛠️ \u003cstrong data-start=\"1422\" data-end=\"1439\"\u003eHow to Use It\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003col data-start=\"1443\" data-end=\"1765\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"1443\" data-end=\"1501\"\u003e\n\u003cp data-start=\"1446\" data-end=\"1501\"\u003eSlot the E25 into the Type-C port of your SGS device.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1502\" data-end=\"1560\"\u003e\n\u003cp data-start=\"1505\" data-end=\"1560\"\u003eTap the WiFi button to link it with your Vivosun App.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1561\" data-end=\"1629\"\u003e\n\u003cp data-start=\"1564\" data-end=\"1629\"\u003eAdd it to your existing E42\/E42A setup or run it independently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1630\" data-end=\"1695\"\u003e\n\u003cp data-start=\"1633\" data-end=\"1695\"\u003eLoad up professional grow recipes or set your own schedules.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1696\" data-end=\"1765\"\u003e\n\u003cp data-start=\"1699\" data-end=\"1765\"\u003eSit back and watch your plants thrive while you sip your coffee.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr data-start=\"1767\" data-end=\"1770\"\u003e\n\u003ch3 data-start=\"1772\" data-end=\"1799\" style=\"text-align: center;\"\u003e🌟 \u003cstrong data-start=\"1779\" data-end=\"1797\"\u003eGrow Guys Tips\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"1801\" data-end=\"2029\" style=\"text-align: center;\"\u003eIf you’re running multiple lights, fans, and gadgets, this little guy keeps everything in sync like a grow-room conductor. Pro tip: pair it with an AeroLight for precise stage-based lighting – your plants will love you for it.\u003c\/p\u003e\n\u003chr data-start=\"2031\" data-end=\"2034\"\u003e\n\u003ch3 data-start=\"2036\" data-end=\"2060\" style=\"text-align: center;\"\u003e🧃 \u003cstrong data-start=\"2043\" data-end=\"2058\"\u003ePerfect For\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"2062\" data-end=\"2263\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"2062\" data-end=\"2122\"\u003e\n\u003cp data-start=\"2064\" data-end=\"2122\"\u003eGrowers who want WiFi control without a wiring nightmare\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2123\" data-end=\"2171\"\u003e\n\u003cp data-start=\"2125\" data-end=\"2171\"\u003eExpanding an existing GrowHub E42\/E42A setup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2172\" data-end=\"2223\"\u003e\n\u003cp data-start=\"2174\" data-end=\"2223\"\u003eRunning multiple SGS devices in perfect harmony\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2224\" data-end=\"2263\"\u003e\n\u003cp data-start=\"2226\" data-end=\"2263\"\u003eMaximising yields with minimal fuss\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2265\" data-end=\"2268\"\u003e\n\u003ch3 data-start=\"2270\" data-end=\"2296\" style=\"text-align: center;\"\u003e📦 \u003cstrong data-start=\"2277\" data-end=\"2294\"\u003eSpecs \u0026amp; Stuff\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"2298\" data-end=\"2588\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"2298\" data-end=\"2365\"\u003e\n\u003cp data-start=\"2300\" data-end=\"2365\"\u003e\u003cstrong data-start=\"2300\" data-end=\"2318\"\u003eCompatibility:\u003c\/strong\u003e AeroLight, AeroZesh, AeroWave E, SGS devices\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2366\" data-end=\"2403\"\u003e\n\u003cp data-start=\"2368\" data-end=\"2403\"\u003e\u003cstrong data-start=\"2368\" data-end=\"2380\"\u003eControl:\u003c\/strong\u003e WiFi via Vivosun App\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2404\" data-end=\"2476\"\u003e\n\u003cp data-start=\"2406\" data-end=\"2476\"\u003e\u003cstrong data-start=\"2406\" data-end=\"2419\"\u003eFeatures:\u003c\/strong\u003e Smart auto-mode, professional grow recipes, scheduling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2477\" data-end=\"2534\"\u003e\n\u003cp data-start=\"2479\" data-end=\"2534\"\u003e\u003cstrong data-start=\"2479\" data-end=\"2495\"\u003eConnections:\u003c\/strong\u003e Type-C port, RJ45 for device linking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2535\" data-end=\"2588\"\u003e\n\u003cp data-start=\"2537\" data-end=\"2588\"\u003e\u003cstrong data-start=\"2537\" data-end=\"2552\"\u003eDimensions:\u003c\/strong\u003e Compact design for easy placement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2590\" data-end=\"2593\"\u003e\n\u003ch2 data-start=\"2595\" data-end=\"2648\" style=\"text-align: center;\"\u003e🚀 \u003cstrong data-start=\"2601\" data-end=\"2646\"\u003ePlug It In, Power It Up, Grow Like a Boss\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-start=\"2650\" data-end=\"2788\" style=\"text-align: center;\"\u003eThis is the no-brainer upgrade your smart grow setup’s been begging for. Chuck it in your cart and let the E25 handle the heavy lifting.\u003c\/p\u003e","brand":"Vivosun","offers":[{"title":"Default Title","offer_id":50495206621482,"sku":"VIV-GH-E25","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/GrowHub-E25-Controller-by-Vivosun-Smart-Expansion-Port-for-E42E42A.jpg?v=1770080097"},{"product_id":"vivosun-aerozesh-inline-fan-e42a-controller","title":"AeroZesh Inline Fan with E42A Controller by VIVOSUN — Smart Grow Tent Exhaust Fan","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe VIVOSUN AeroZesh S-Series pairs a PWM-controlled EC inline fan with the GrowHub E42A WiFi controller in one box — exhaust ventilation that adjusts itself to your tent's temperature and humidity instead of running flat out around the clock. The mixed-flow design pushes air across long duct runs, and the E42A's built-in gauge and probe track conditions inside and outside the tent, including VPD, all from the VIVOSUN app. Available in 4″, 6″ and 8″ duct sizes moving up to 830 CFM.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eGrowHub E42A Included\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTemperature and humidity WiFi controller with a built-in gauge and one probe — monitors inside and outside the tent, including VPD.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAutomated Climate Response\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet temperature and humidity thresholds and the fan ramps up or backs off on its own — schedules, cycles and speed programming included.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eEfficient PWM EC Motor\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBrushless EC motor with PWM speed control draws less power than a traditional AC fan, and the mixed-flow design carries air across longer distances.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eWiFi App Control\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMonitor data and adjust ventilation from anywhere via the VIVOSUN app, with Grow Recipes and expanded settings — and unify other VIVOSUN smart gear on the same E42A platform.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications by Size\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 2rem; font-size: 0.93rem;\"\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; padding: 8px 10px; border-bottom: 2px solid #2e5e2e; background: #f4f9f4;\"\u003e\u003c\/th\u003e\n\u003cth style=\"text-align: left; padding: 8px 10px; border-bottom: 2px solid #2e5e2e; background: #f4f9f4;\"\u003eS4 (4″)\u003c\/th\u003e\n\u003cth style=\"text-align: left; padding: 8px 10px; border-bottom: 2px solid #2e5e2e; background: #f4f9f4;\"\u003eS6 (6″)\u003c\/th\u003e\n\u003cth style=\"text-align: left; padding: 8px 10px; border-bottom: 2px solid #2e5e2e; background: #f4f9f4;\"\u003eS8 (8″)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e\u003cstrong\u003eMax Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e208 CFM\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e405 CFM\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e830 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e\u003cstrong\u003eFan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e3000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e3100 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e20W\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e35W\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e\u003cstrong\u003eNoise Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e39 dBA\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e45 dBA\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e51 dBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\" colspan=\"3\"\u003ePWM-controlled EC motor, mixed-flow design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\"\u003e\u003cstrong\u003eController\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px; border-bottom: 1px solid #edf3ed;\" colspan=\"3\"\u003eGrowHub E42A temperature \u0026amp; humidity WiFi controller with probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 10px;\"\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 10px;\" colspan=\"3\"\u003e110–240V, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.5rem; color: #2e5e2e;\"\u003eNot Sure What Size You Need?\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.93rem; line-height: 1.6; margin: 0 0 0.9rem;\"\u003eEnter your tent dimensions and get a matched fan size in seconds.\u003c\/p\u003e\n\u003ca href=\"\/pages\/fan-size-calculator\" style=\"background: #2e5e2e; color: #fff; padding: 0.6rem 1.4rem; border-radius: 6px; font-size: 0.95rem; font-weight: 700; text-decoration: none; display: inline-block;\"\u003eFan Size Calculator\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eThe Grow Guys Tips\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eMount the fan at the top of the tent — warm, humid air rises, so a high exhaust point clears it fastest\u003c\/li\u003e\n\u003cli\u003eBalance exhaust with passive intake vents or an intake fan so fresh air and CO₂ can actually get in\u003c\/li\u003e\n\u003cli\u003eLet the E42A do the work — set your temp and humidity triggers once and the fan speed follows the environment instead of you chasing it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set It Up\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003eMount the fan inline near the top of your tent — between the carbon filter and the exhaust point is the standard layout.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003eConnect the fan to the GrowHub E42A controller and position the probe at canopy height inside the tent.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003ePair the E42A with the VIVOSUN app over WiFi to view live data and program settings remotely.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eSet your temperature and humidity thresholds so fan speed ramps automatically when conditions drift.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/products\/growhub-e25-controller-by-vivosun\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrowHub E25 Expansion\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAdds an extra smart port to your E42A so more VIVOSUN gear runs off the one controller.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/aerowave-by-vivosun\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAeroWave E Series Clip Fan\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eIn-tent circulation to match your exhaust — same EC efficiency, same app, same ecosystem.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/odour-control-carbon-filters\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eCarbon Filters\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMatch a 4″, 6″ or 8″ filter to your fan size and scrub exhaust odour before it leaves the tent.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/clip-fans-air-circulation\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eClip Fans \u0026amp; Circulation\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eExhaust moves air out — circulation fans keep it moving across the canopy in between.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eCommon Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it come with the E42A controller?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. Every size ships with the GrowHub E42A temperature and humidity WiFi controller, including the built-in gauge and one environment probe.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control it from my phone?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The E42A connects to the VIVOSUN app over WiFi, so you can monitor live temperature, humidity and VPD data and adjust ventilation from anywhere.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it adjust fan speed automatically?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. Set temperature and humidity thresholds on the E42A and the fan speed responds automatically as conditions change — plus timers, cycles and schedule programming.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhich size do I need for my tent?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe 4″ (208 CFM) suits small tents and propagation spaces, the 6″ (405 CFM) covers most single tents including filtered runs, and the 8″ (830 CFM) handles large tents and rooms. Use the Fan Size Calculator above for a match based on your exact dimensions.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan it run other VIVOSUN smart devices?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The E42A is the hub of VIVOSUN's GrowHub platform — compatible smart devices like the AeroWave clip fans can be unified on the same controller and app, and the E25 expansion adds extra ports.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"margin: 1.5rem 0 0;\"\u003e\n\u003cp style=\"font-size: 0.95rem; font-weight: 700; margin-bottom: 0.75rem; color: #1a1a1a;\"\u003eSelect Size\u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.75rem; flex-wrap: wrap; margin-bottom: 1.5rem;\"\u003e\n\u003cbutton data-variant-id=\"51210850173226\" style=\"padding: 0.6rem 1.4rem; border: 2px solid #2e5e2e; border-radius: 6px; background: #2e5e2e; color: #fff; font-size: 0.95rem; font-weight: 700; cursor: pointer;\"\u003e4\" (208 CFM)\u003c\/button\u003e\n\u003cbutton data-variant-id=\"51210850205994\" style=\"padding: 0.6rem 1.4rem; border: 2px solid #2e5e2e; border-radius: 6px; background: #fff; color: #2e5e2e; font-size: 0.95rem; font-weight: 600; cursor: pointer;\"\u003e6\" (405 CFM)\u003c\/button\u003e\n\u003cbutton data-variant-id=\"51210850238762\" style=\"padding: 0.6rem 1.4rem; border: 2px solid #2e5e2e; border-radius: 6px; background: #fff; color: #2e5e2e; font-size: 0.95rem; font-weight: 600; cursor: pointer;\"\u003e8\" (830 CFM)\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 0;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eVentilation That Runs Itself\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eFan, controller and probe in one box — set your thresholds and let it work.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eBrowse Inline Fans\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n\n  var selectedVariantId = '51210850173226';\n\n  var sizeBtns = document.querySelectorAll('button[data-variant-id]');\n  sizeBtns.forEach(function(b) {\n    b.addEventListener('click', function() {\n      selectedVariantId = this.getAttribute('data-variant-id');\n      sizeBtns.forEach(function(ob) {\n        ob.style.background = '#fff';\n        ob.style.color = '#2e5e2e';\n        ob.style.fontWeight = '600';\n      });\n      this.style.background = '#2e5e2e';\n      this.style.color = '#fff';\n      this.style.fontWeight = '700';\n    });\n  });\n\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt(selectedVariantId, 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"Vivosun","offers":[{"title":"4\"","offer_id":51210850173226,"sku":"VSN-AZS-E42A (4IN)","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"6\"","offer_id":51210850205994,"sku":"VSN-AZS-E42A (6IN)","price":239.95,"currency_code":"AUD","in_stock":true},{"title":"8\"","offer_id":51210850238762,"sku":"VSN-AZS-E42A (8IN)","price":294.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/AeroZesh-Inline-Fan-with-E42A-Controller-by-VIVOSUN-smart-grow-tent-exhaust-fan.jpg?v=1773915512"},{"product_id":"uis-1-to-1-transmitter-receiver-by-ac-infinity","title":"UIS 1-to-1 Transmitter \u0026 Receiver by AC Infinity — Wireless Connection for UIS Controllers \u0026 Devices","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe AC Infinity UIS 1-to-1 Transmitter \u0026amp; Receiver replaces the data cable between your UIS controller and a UIS device with a secure 2.4GHz wireless link. Plug the transmitter into the controller, the receiver into a fan, light, humidifier, or heater, and the pair locks together with a non-interchangeable ID code — no app, no WiFi, no internet needed. Range is up to 8 metres, even through walls, with millisecond response for temperature, humidity, VPD, timer, and schedule control.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSecure 1-to-1 Pairing\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEach pair carries a unique, non-interchangeable ID code — an exclusive link with no interference or cross-talk between devices.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Internet Required\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRuns completely offline on its own 2.4GHz signal. Your automation keeps working when the WiFi drops out.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eMillisecond Response\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWired-grade responsiveness for temperature, humidity, VPD triggers, timers, and schedules — no lag between controller and device.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug and Grow\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eNo pairing menus or setup drama — transmitter into the controller port, receiver into the device, done.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e AC-WTA3\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 1 transmitter + 1 receiver pair\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSignal:\u003c\/strong\u003e 2.4 GHz\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e Up to 8m (26 ft), through walls\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDevices Supported:\u003c\/strong\u003e 1 per pair\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eUIS Port Required:\u003c\/strong\u003e 1 per pair\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Male UIS\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eInternet Required:\u003c\/strong\u003e None — fully offline\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTransmitter Size:\u003c\/strong\u003e 0.9 x 1.4 x 4.6cm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eReceiver Size:\u003c\/strong\u003e 0.9 x 1.6 x 3.4cm\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrow Guys Tip — Range Drops as You Add Pairs\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003e1 transmitter on your controller: keep within 8m of the receiver.\u003c\/li\u003e\n\u003cli\u003e2 transmitters: keep everything within 5m.\u003c\/li\u003e\n\u003cli\u003e3 to 8 transmitters: keep the whole setup within 3m.\u003c\/li\u003e\n\u003cli\u003ePlan your controller position around the tightest distance before you buy multiple pairs — signal complaints on wireless kit almost always trace back to this table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Use It\u003c\/h2\u003e\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003ePlug the transmitter into a spare UIS port on your compatible AC Infinity controller.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003ePlug the receiver into the UIS port on the device you want to control — fan, light, humidifier, or heater.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eThe pair links automatically on its factory-matched ID code — no pairing procedure needed.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eRun your automation as normal from the controller — the wireless link carries every trigger, timer, and schedule.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe UIS controllers this transmitter plugs into.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/environment\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eFans, humidifiers, and heaters that go wireless on the receiving end.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/environment-accessories\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Accessories\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eCables, sensors, and add-ons for the UIS ecosystem.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need WiFi or internet for it to work?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The pair communicates directly on its own 2.4GHz signal, completely independent of your network — your automation keeps running through internet outages.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat controllers and devices is it compatible with?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eIt pairs with Controller AI+, Controller 69 PRO+, and Controller 69 PRO on the controller side, and UIS devices including CLOUDLINE inline fans, CLOUDRAY clip fans, CLOUDFORGE humidifiers, THERMOFORGE heaters, and IONBEAM, IONBOARD, and IONFRAME grow lights.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan one pack connect multiple devices?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. Each transmitter and receiver pair carries one exclusive link between one controller port and one device. Run one pair per device you want wireless, up to 8 per controller.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it work through walls?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The 2.4GHz link holds through walls at up to 8m (26 ft) with a single pair — handy for controllers mounted outside the tent or in the next room.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the range drop if I run several pairs?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. One transmitter holds 8m, two need to stay within 5m, and three to eight should stay within 3m of the controller. Plan your layout around the tightest figure.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eCut the Cables, Keep the Control\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eSecure wireless UIS links — no internet, no lag, no cable spaghetti.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/environment-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eBrowse Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('50647203774762', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"AC Infinity","offers":[{"title":"Default Title","offer_id":50647203774762,"sku":"AC-WTA3","price":74.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/UIS-1-to-1-Transmitter-Receiver-by-AC-Infinity-Wireless-Connection-for-UIS-Controllers-Devices.jpg?v=1787635276"},{"product_id":"soil-sensor-for-controller-ai-by-ac-infinity","title":"Soil Sensor for Controller AI+ by AC Infinity – Moisture Monitor Plug-In","description":"\u003ch2 data-start=\"559\" data-end=\"598\" style=\"text-align: center;\"\u003eStop guessing. Start knowing.\u003c\/h2\u003e\n\u003cp data-start=\"599\" data-end=\"937\" style=\"text-align: center;\"\u003eForget sticking your finger in the dirt and hoping for the best - the AC Infinity Soil Sensor is here to do the dirty work. Built exclusively for the AI+ Controller, this clever little unit tells you exactly when your soil’s thirsty. No guesswork. No overwatering. Just precision moisture monitoring that talks directly to your grow tech.\u003c\/p\u003e\n\u003chr data-start=\"939\" data-end=\"942\"\u003e\n\u003ch3 data-start=\"944\" data-end=\"965\" style=\"text-align: center;\"\u003e🔹 Key Features\u003c\/h3\u003e\n\u003cp data-start=\"967\" data-end=\"1038\" style=\"text-align: center;\"\u003e🌧️ Real-time moisture + saturation readings - refreshes every second\u003c\/p\u003e\n\u003cp data-start=\"1040\" data-end=\"1122\" style=\"text-align: center;\"\u003e🔌 Pairs with AC Infinity AI+ Controller to automate watering and trigger alerts\u003c\/p\u003e\n\u003cp data-start=\"1124\" data-end=\"1201\" style=\"text-align: center;\"\u003e🧠 Smart integration with the AC Infinity app - control water gear remotely\u003c\/p\u003e\n\u003cp data-start=\"1203\" data-end=\"1282\" style=\"text-align: center;\"\u003e🪛 Detachable stem for deeper, more secure placement in beds, pots, and mixes\u003c\/p\u003e\n\u003cp data-start=\"1284\" data-end=\"1361\" style=\"text-align: center;\"\u003e💦 IP67-rated - water, dirt, and root-safe for serious grow room conditions\u003c\/p\u003e\n\u003chr data-start=\"1363\" data-end=\"1366\"\u003e\n\u003ch3 data-start=\"1368\" data-end=\"1391\" style=\"text-align: center;\"\u003e🛠️ How to Use It\u003c\/h3\u003e\n\u003cul data-start=\"1393\" data-end=\"1759\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"1393\" data-end=\"1438\"\u003e\n\u003cp data-start=\"1395\" data-end=\"1438\"\u003ePlug into your AC Infinity AI+ Controller\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1439\" data-end=\"1523\"\u003e\n\u003cp data-start=\"1441\" data-end=\"1523\"\u003eInsert the sensor into your soil or media - use the detachable stem to go deeper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1524\" data-end=\"1597\"\u003e\n\u003cp data-start=\"1526\" data-end=\"1597\"\u003eSet triggers on your controller for smart automation of watering gear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1598\" data-end=\"1663\"\u003e\n\u003cp data-start=\"1600\" data-end=\"1663\"\u003eGet alerts and real-time moisture data on the AC Infinity app\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1664\" data-end=\"1759\"\u003e\n\u003cp data-start=\"1666\" data-end=\"1759\"\u003eOnly one sensor per controller (use a splitter - sold separately - if you want to scale up)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1761\" data-end=\"1764\"\u003e\n\u003ch3 data-start=\"1766\" data-end=\"1789\" style=\"text-align: center;\"\u003e🌟 Grow Guys Tips\u003c\/h3\u003e\n\u003cul data-start=\"1791\" data-end=\"2147\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"1791\" data-end=\"1865\"\u003e\n\u003cp data-start=\"1793\" data-end=\"1865\"\u003eWant to avoid root rot or crispy leaves? This sensor’s your best mate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1866\" data-end=\"1971\"\u003e\n\u003cp data-start=\"1868\" data-end=\"1971\"\u003eUse it in fabric pots, garden beds, or raised mixes - it’s gentle on roots and gives rock-solid data.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1972\" data-end=\"2069\"\u003e\n\u003cp data-start=\"1974\" data-end=\"2069\"\u003eCombine with your AC Infinity fan and watering setups to build a fully automated grow system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2070\" data-end=\"2147\"\u003e\n\u003cp data-start=\"2072\" data-end=\"2147\"\u003eDon’t forget to grab a sensor splitter if you want to monitor more zones.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2149\" data-end=\"2152\"\u003e\n\u003ch3 data-start=\"2154\" data-end=\"2174\" style=\"text-align: center;\"\u003e🧃 Perfect For\u003c\/h3\u003e\n\u003cul data-start=\"2176\" data-end=\"2418\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"2176\" data-end=\"2230\"\u003e\n\u003cp data-start=\"2178\" data-end=\"2230\"\u003eSmart grow ops using the AC Infinity AI+ ecosystem\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2231\" data-end=\"2300\"\u003e\n\u003cp data-start=\"2233\" data-end=\"2300\"\u003eIndoor growers tired of overwatering or missing irrigation cycles\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2301\" data-end=\"2358\"\u003e\n\u003cp data-start=\"2303\" data-end=\"2358\"\u003eFabric pots, raised garden beds, and custom grow beds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2359\" data-end=\"2418\"\u003e\n\u003cp data-start=\"2361\" data-end=\"2418\"\u003eTech-savvy growers who want hands-free moisture control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2420\" data-end=\"2423\"\u003e\n\u003ch3 data-start=\"2425\" data-end=\"2447\" style=\"text-align: center;\"\u003e📦 Specs \u0026amp; Stuff\u003c\/h3\u003e\n\u003cul data-start=\"2449\" data-end=\"2771\" style=\"text-align: center;\"\u003e\n\u003cli data-start=\"2449\" data-end=\"2467\"\u003e\n\u003cp data-start=\"2451\" data-end=\"2467\"\u003eModel: AC-SLS3\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2468\" data-end=\"2526\"\u003e\n\u003cp data-start=\"2470\" data-end=\"2526\"\u003eDimensions: 1.41 x 2.83 x 0.55 in (3.6 x 7.2 x 1.4 cm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2527\" data-end=\"2561\"\u003e\n\u003cp data-start=\"2529\" data-end=\"2561\"\u003eCord length: 144 in (365.8 cm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2562\" data-end=\"2586\"\u003e\n\u003cp data-start=\"2564\" data-end=\"2586\"\u003eMaterial: Fiberglass\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2587\" data-end=\"2625\"\u003e\n\u003cp data-start=\"2589\" data-end=\"2625\"\u003eDetection: Moisture and saturation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2626\" data-end=\"2643\"\u003e\n\u003cp data-start=\"2628\" data-end=\"2643\"\u003eAccuracy: ±5%\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2644\" data-end=\"2670\"\u003e\n\u003cp data-start=\"2646\" data-end=\"2670\"\u003eRefresh rate: 1 second\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2671\" data-end=\"2698\"\u003e\n\u003cp data-start=\"2673\" data-end=\"2698\"\u003eWaterproof rating: IP67\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2699\" data-end=\"2771\"\u003e\n\u003cp data-start=\"2701\" data-end=\"2771\"\u003eCompatibility: One sensor per controller (splitters sold separately)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2773\" data-end=\"2776\"\u003e\n\u003ch2 data-start=\"2778\" data-end=\"2826\" style=\"text-align: center;\"\u003e🚀 Plug it in. Let the dirt do the talking.\u003c\/h2\u003e\n\u003cp data-start=\"2827\" data-end=\"2971\" style=\"text-align: center;\"\u003ePrecision watering starts here. Add it to your cart, sync it with your AI+ Controller, and grow like a legend with full control from your phone.\u003c\/p\u003e","brand":"A\/C Infinity","offers":[{"title":"Default Title","offer_id":50725604622634,"sku":"AC‑SLS3","price":44.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Soil-Sensor-for-Controller-AI-by-AC-Infinity-Moisture-Monitor-Plug-In.jpg?v=1770080326"},{"product_id":"co-light-sensor-for-controller-ai-by-ac-infinity","title":"CO₂ + Light Sensor for Controller AI+ by AC Infinity – Smart Grow Optimiser","description":"\u003ch2 style=\"text-align: center;\" data-end=\"605\" data-start=\"567\"\u003eYour plants just got smarter\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" data-end=\"982\" data-start=\"606\"\u003eDial in your grow room like a pro with the AC Infinity CO₂ + Light Sensor. Designed exclusively for AI+ Controllers, this beauty doesn't just measure air - it \u003cem data-end=\"773\" data-start=\"765\"\u003ethinks\u003c\/em\u003e. It tracks CO₂ levels and light intensity in real time, then tells your controller when to kick fans on, schedule CO₂ bursts, or chill out for the night. It’s like giving your plants their own climate butler.\u003c\/p\u003e\n\u003chr data-end=\"987\" data-start=\"984\"\u003e\n\u003ch3 style=\"text-align: center;\" data-end=\"1010\" data-start=\"989\"\u003e🔹 Key Features\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\" data-end=\"1081\" data-start=\"1012\"\u003e🧠 Adaptive CO₂ and light monitoring with automated decision-making\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-end=\"1166\" data-start=\"1083\"\u003e💨 Smart fan + CO₂ control based on real-time PPM readings - no waste, all growth\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-end=\"1249\" data-start=\"1168\"\u003e🌗 Day\/night scheduling + precision cycling to optimise every hour of your grow\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-end=\"1325\" data-start=\"1251\"\u003e📱 Syncs with AC Infinity’s Wi-Fi app for real-time tracking and control\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-end=\"1397\" data-start=\"1327\"\u003e📏 Massive detection range: CO₂ (0–40,000 ppm), light (1–65,535 lux)\u003c\/p\u003e\n\u003chr data-end=\"1402\" data-start=\"1399\"\u003e\n\u003ch3 style=\"text-align: center;\" data-end=\"1427\" data-start=\"1404\"\u003e🛠️ How to Use It\u003c\/h3\u003e\n\u003cul style=\"text-align: center;\" data-end=\"1765\" data-start=\"1429\"\u003e\n\u003cli data-end=\"1492\" data-start=\"1429\"\u003e\n\u003cp data-end=\"1492\" data-start=\"1431\"\u003ePlug directly into your AI+ Controller - it syncs instantly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1568\" data-start=\"1493\"\u003e\n\u003cp data-end=\"1568\" data-start=\"1495\"\u003ePlace in your grow space near canopy height for best CO₂\/light readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1661\" data-start=\"1569\"\u003e\n\u003cp data-end=\"1661\" data-start=\"1571\"\u003eUse the app to set day\/night cycles, minimum intake speeds, and fresh air exchange logic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1765\" data-start=\"1662\"\u003e\n\u003cp data-end=\"1765\" data-start=\"1664\"\u003eWatch as your fans, CO₂ gear, and airflow adjust themselves automatically - no micromanaging needed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"1770\" data-start=\"1767\"\u003e\n\u003ch3 style=\"text-align: center;\" data-end=\"1795\" data-start=\"1772\"\u003e🌟 Grow Guys Tips\u003c\/h3\u003e\n\u003cul style=\"text-align: center;\" data-end=\"2171\" data-start=\"1797\"\u003e\n\u003cli data-end=\"1892\" data-start=\"1797\"\u003e\n\u003cp data-end=\"1892\" data-start=\"1799\"\u003eUse this with your CO₂ tanks or bags to make sure you’re not just pumping gas for no reason\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1988\" data-start=\"1893\"\u003e\n\u003cp data-end=\"1988\" data-start=\"1895\"\u003eCombine with AC Infinity’s exhaust\/intake fans for fully automated FAE (Fresh Air Exchange)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2080\" data-start=\"1989\"\u003e\n\u003cp data-end=\"2080\" data-start=\"1991\"\u003eAdjust day\/night lighting thresholds to match your lighting gear for precise scheduling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2171\" data-start=\"2081\"\u003e\n\u003cp data-end=\"2171\" data-start=\"2083\"\u003eIf you’re chasing yield, stable CO₂ around 1200–1500 ppm can make a massive difference\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2176\" data-start=\"2173\"\u003e\n\u003ch3 style=\"text-align: center;\" data-end=\"2198\" data-start=\"2178\"\u003e🧃 Perfect For\u003c\/h3\u003e\n\u003cul style=\"text-align: center;\" data-end=\"2440\" data-start=\"2200\"\u003e\n\u003cli data-end=\"2261\" data-start=\"2200\"\u003e\n\u003cp data-end=\"2261\" data-start=\"2202\"\u003eGrowers running sealed or semi-sealed indoor environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2315\" data-start=\"2262\"\u003e\n\u003cp data-end=\"2315\" data-start=\"2264\"\u003eCO₂-enriched grow rooms with tight control on PPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2379\" data-start=\"2316\"\u003e\n\u003cp data-end=\"2379\" data-start=\"2318\"\u003eLED or HPS setups needing consistent photoperiod regulation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2440\" data-start=\"2380\"\u003e\n\u003cp data-end=\"2440\" data-start=\"2382\"\u003eSmart growers who want full data feedback and automation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2445\" data-start=\"2442\"\u003e\n\u003ch3 style=\"text-align: center;\" data-end=\"2469\" data-start=\"2447\"\u003e📦 Specs \u0026amp; Stuff\u003c\/h3\u003e\n\u003cul style=\"text-align: center;\" data-end=\"2806\" data-start=\"2471\"\u003e\n\u003cli data-end=\"2489\" data-start=\"2471\"\u003e\n\u003cp data-end=\"2489\" data-start=\"2473\"\u003eModel: AC-COS3\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2548\" data-start=\"2490\"\u003e\n\u003cp data-end=\"2548\" data-start=\"2492\"\u003eDimensions: 1.41 x 2.83 x 0.55 in (3.6 x 7.2 x 1.4 cm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2583\" data-start=\"2549\"\u003e\n\u003cp data-end=\"2583\" data-start=\"2551\"\u003eCord length: 144 in (365.8 cm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2680\" data-start=\"2584\"\u003e\n\u003cp data-end=\"2598\" data-start=\"2586\"\u003eDetection:\u003c\/p\u003e\n\u003cul data-end=\"2680\" data-start=\"2601\"\u003e\n\u003cli data-end=\"2637\" data-start=\"2601\"\u003e\n\u003cp data-end=\"2637\" data-start=\"2603\"\u003eCO₂: 0–40,000 ppm (±50 ppm, ±5%)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2680\" data-start=\"2640\"\u003e\n\u003cp data-end=\"2680\" data-start=\"2642\"\u003eLight: 1–65,535 lx (accuracy 1.2 lx)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2751\" data-start=\"2681\"\u003e\n\u003cp data-end=\"2699\" data-start=\"2683\"\u003eResponse time:\u003c\/p\u003e\n\u003cul data-end=\"2751\" data-start=\"2702\"\u003e\n\u003cli data-end=\"2721\" data-start=\"2702\"\u003e\n\u003cp data-end=\"2721\" data-start=\"2704\"\u003eCO₂: 60 seconds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2751\" data-start=\"2724\"\u003e\n\u003cp data-end=\"2751\" data-start=\"2726\"\u003eLight: 120 milliseconds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2781\" data-start=\"2752\"\u003e\n\u003cp data-end=\"2781\" data-start=\"2754\"\u003eOperating temp: 32°–122°F\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2806\" data-start=\"2782\"\u003e\n\u003cp data-end=\"2806\" data-start=\"2784\"\u003eHumidity: 35%–60% RH\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2811\" data-start=\"2808\"\u003e\n\u003ch2 style=\"text-align: center;\" data-end=\"2858\" data-start=\"2813\"\u003e🚀 Give your grow the brains it deserves\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" data-end=\"3050\" data-start=\"2859\"\u003eSet it. Sync it. Forget it. This CO₂ + Light Sensor lets your setup make the smart calls, so you can focus on growing the good stuff. Chuck it in your cart and let the automation do the rest.\u003c\/p\u003e","brand":"A\/C Infinity","offers":[{"title":"Default Title","offer_id":50725633786154,"sku":"AC‑COS3","price":105.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/CO2-Light-Sensor-for-Controller-AI-by-AC-Infinity-Smart-Grow-Optimiser.jpg?v=1770080335"},{"product_id":"vivosun-growhub-e42a-grow-tent-controller","title":"GrowHub E42A Controller by VIVOSUN - smart grow environment controller","description":"\u003ch2 data-start=\"663\" data-end=\"692\" style=\"text-align: center;\"\u003eThe problem this solves\u003c\/h2\u003e\n\u003cp data-start=\"694\" data-end=\"847\" style=\"text-align: center;\"\u003eManaging lights, airflow, and environment separately is messy and inconsistent. Small changes in temperature or humidity can quickly impact plant growth.\u003c\/p\u003e\n\u003cp data-start=\"849\" data-end=\"940\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"853\" data-end=\"888\"\u003eVIVOSUN GrowHub E42A Controller\u003c\/strong\u003e centralises your grow room control into one system.\u003c\/p\u003e\n\u003cp data-start=\"942\" data-end=\"1105\" style=\"text-align: center;\"\u003eIt connects compatible equipment, monitors temperature and humidity, and automates lighting and airflow so your environment stays stable throughout the grow cycle.\u003c\/p\u003e\n\u003chr data-start=\"1108\" data-end=\"1111\"\u003e\n\u003ch2 data-start=\"1113\" data-end=\"1138\" style=\"text-align: center;\"\u003e🔥 Why growers rate it\u003c\/h2\u003e\n\u003cp data-start=\"1140\" data-end=\"1740\" style=\"text-align: center;\"\u003e• Centralised device control → manage lights, fans, and equipment from one controller\u003cbr data-start=\"1225\" data-end=\"1228\"\u003e• Built-in temperature \u0026amp; humidity monitoring → track environmental conditions in real time\u003cbr data-start=\"1318\" data-end=\"1321\"\u003e• Automated grow scheduling → control light cycles, fan speeds, and airflow automatically\u003cbr data-start=\"1410\" data-end=\"1413\"\u003e• Smart equipment integration → synchronise compatible grow devices through GrowHub\u003cbr data-start=\"1496\" data-end=\"1499\"\u003e• WiFi connectivity → monitor and adjust your grow remotely via the mobile app\u003cbr data-start=\"1577\" data-end=\"1580\"\u003e• Clear LED display with capacitive buttons → simple on-device adjustments\u003cbr data-start=\"1654\" data-end=\"1657\"\u003e• Flexible mounting design → attaches easily to grow tent fabric without brackets\u003c\/p\u003e\n\u003chr data-start=\"1743\" data-end=\"1746\"\u003e\n\u003ch2 data-start=\"1748\" data-end=\"1763\" style=\"text-align: center;\"\u003e📦 Key specs\u003c\/h2\u003e\n\u003cp data-start=\"1765\" data-end=\"2105\" style=\"text-align: center;\"\u003e• Controller type: Smart grow environment controller\u003cbr data-start=\"1817\" data-end=\"1820\"\u003e• Monitoring: Temperature and humidity sensor with probe\u003cbr data-start=\"1876\" data-end=\"1879\"\u003e• Connectivity: WiFi (2.4 GHz network required)\u003cbr data-start=\"1926\" data-end=\"1929\"\u003e• Control functions: Lighting schedule, fan speed, airflow automation\u003cbr data-start=\"1998\" data-end=\"2001\"\u003e• Interface: LED display with capacitive touch buttons\u003cbr data-start=\"2055\" data-end=\"2058\"\u003e• Mounting: Grow tent compatible fabric mount\u003c\/p\u003e\n\u003chr data-start=\"2108\" data-end=\"2111\"\u003e\n\u003ch2 data-start=\"2113\" data-end=\"2132\" style=\"text-align: center;\"\u003e🌱 Grow Guys tip\u003c\/h2\u003e\n\u003cp data-start=\"2134\" data-end=\"2168\" style=\"text-align: center;\"\u003eAutomation makes consistency easy.\u003c\/p\u003e\n\u003cp data-start=\"2170\" data-end=\"2367\" style=\"text-align: center;\"\u003eUse the \u003cstrong data-start=\"2178\" data-end=\"2197\"\u003eE42A Controller\u003c\/strong\u003e to maintain stable airflow and lighting cycles so plants experience fewer environmental swings - something that dramatically improves canopy health in indoor grow rooms.\u003c\/p\u003e\n\u003chr data-start=\"2370\" data-end=\"2373\"\u003e\n\u003ch2 data-start=\"2375\" data-end=\"2408\" style=\"text-align: center;\"\u003e🛠️ How to dial it in properly\u003c\/h2\u003e\n\u003ch3 data-start=\"2411\" data-end=\"2443\" style=\"text-align: center;\"\u003eConnect compatible equipment\u003c\/h3\u003e\n\u003cp data-start=\"2445\" data-end=\"2595\" style=\"text-align: center;\"\u003eLink your compatible lights, ventilation fans, and circulation equipment to the \u003cstrong data-start=\"2525\" data-end=\"2545\"\u003eGrowHub platform\u003c\/strong\u003e so everything can be managed from one controller.\u003c\/p\u003e\n\u003ch3 data-start=\"2598\" data-end=\"2628\" style=\"text-align: center;\"\u003eConfigure your grow stages\u003c\/h3\u003e\n\u003cp data-start=\"2630\" data-end=\"2722\" style=\"text-align: center;\"\u003eProgram lighting cycles, fan speed, and airflow patterns based on your plant’s growth stage.\u003c\/p\u003e\n\u003ch3 data-start=\"2725\" data-end=\"2755\" style=\"text-align: center;\"\u003eMonitor environment trends\u003c\/h3\u003e\n\u003cp data-start=\"2757\" data-end=\"2891\" style=\"text-align: center;\"\u003eUse the built-in \u003cstrong data-start=\"2774\" data-end=\"2809\"\u003etemperature and humidity sensor\u003c\/strong\u003e to track changes inside the grow tent and adjust airflow or lighting accordingly.\u003c\/p\u003e\n\u003ch3 data-start=\"2894\" data-end=\"2915\" style=\"text-align: center;\"\u003eApp control setup\u003c\/h3\u003e\n\u003cp data-start=\"2917\" data-end=\"3053\" style=\"text-align: center;\"\u003eConnect the controller to the \u003cstrong data-start=\"2947\" data-end=\"2991\"\u003eVIVOSUN app using a 2.4 GHz WiFi network\u003c\/strong\u003e to unlock remote monitoring and advanced automation features.\u003c\/p\u003e\n\u003ch3 data-start=\"3056\" data-end=\"3080\" style=\"text-align: center;\"\u003eFine-tune automation\u003c\/h3\u003e\n\u003cp data-start=\"3082\" data-end=\"3214\" style=\"text-align: center;\"\u003eOnce baseline settings are established, adjust automation rules to keep conditions stable as plant size and canopy density increase.\u003c\/p\u003e\n\u003chr data-start=\"3217\" data-end=\"3220\"\u003e\n\u003ch2 data-start=\"3222\" data-end=\"3246\" style=\"text-align: center;\"\u003e🧩 What it pairs with\u003c\/h2\u003e\n\u003cp data-start=\"3248\" data-end=\"3350\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"3252\" data-end=\"3287\"\u003eVIVOSUN GrowHub E42A Controller\u003c\/strong\u003e works best when integrated into a complete indoor grow system.\u003c\/p\u003e\n\u003cp data-start=\"3352\" data-end=\"3548\" style=\"text-align: center;\"\u003eGrowers typically connect their \u003cstrong data-start=\"3384\" data-end=\"3401\"\u003egrow lighting\u003c\/strong\u003e, \u003cstrong data-start=\"3403\" data-end=\"3429\"\u003einline extraction fans\u003c\/strong\u003e, and \u003cstrong data-start=\"3435\" data-end=\"3459\"\u003eair circulation fans\u003c\/strong\u003e so the controller can coordinate lighting schedules and airflow responses automatically.\u003c\/p\u003e\n\u003cp data-start=\"3550\" data-end=\"3775\" style=\"text-align: center;\"\u003eWhen combined with proper \u003cstrong data-start=\"3576\" data-end=\"3647\"\u003eenvironmental monitoring, ventilation systems, and lighting control\u003c\/strong\u003e, the controller helps stabilise temperature and humidity - two of the most important factors in consistent indoor plant growth.\u003c\/p\u003e\n\u003cp data-start=\"3777\" data-end=\"3912\" style=\"text-align: center;\"\u003eUsing automation also reduces manual adjustments, making it easier to maintain a balanced environment throughout the entire grow cycle.\u003c\/p\u003e\n\u003chr data-start=\"3915\" data-end=\"3918\"\u003e\n\u003ch2 data-start=\"3920\" data-end=\"3951\" style=\"text-align: center;\"\u003e❓ Frequently asked questions\u003c\/h2\u003e\n\u003ch3 data-start=\"3954\" data-end=\"4004\" style=\"text-align: center;\"\u003eWhat does the VIVOSUN E42A controller control?\u003c\/h3\u003e\n\u003cp data-start=\"4006\" data-end=\"4108\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"4010\" data-end=\"4045\"\u003eVIVOSUN E42A GrowHub controller\u003c\/strong\u003e manages compatible lighting, ventilation, and airflow devices.\u003c\/p\u003e\n\u003cp data-start=\"4110\" data-end=\"4218\" style=\"text-align: center;\"\u003eIt can automate light schedules, adjust fan speeds, and monitor temperature and humidity in your grow space.\u003c\/p\u003e\n\u003ch3 data-start=\"4221\" data-end=\"4263\" style=\"text-align: center;\"\u003eDoes the E42A controller require WiFi?\u003c\/h3\u003e\n\u003cp data-start=\"4265\" data-end=\"4308\" style=\"text-align: center;\"\u003eNo, but WiFi unlocks its full capabilities.\u003c\/p\u003e\n\u003cp data-start=\"4310\" data-end=\"4415\" style=\"text-align: center;\"\u003eConnecting to the VIVOSUN app allows remote monitoring, automation settings, and grow recipe programming.\u003c\/p\u003e\n\u003ch3 data-start=\"4418\" data-end=\"4468\" style=\"text-align: center;\"\u003eWhat WiFi network does the controller require?\u003c\/h3\u003e\n\u003cp data-start=\"4470\" data-end=\"4526\" style=\"text-align: center;\"\u003eThe controller connects using \u003cstrong data-start=\"4500\" data-end=\"4525\"\u003e2.4 GHz WiFi networks\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"4528\" data-end=\"4597\" style=\"text-align: center;\"\u003e5 GHz networks are not supported when pairing the GrowHub controller.\u003c\/p\u003e\n\u003ch3 data-start=\"4600\" data-end=\"4639\" style=\"text-align: center;\"\u003eCan beginners use the GrowHub E42A?\u003c\/h3\u003e\n\u003cp data-start=\"4641\" data-end=\"4696\" style=\"text-align: center;\"\u003eYes. The interface is designed to be beginner-friendly.\u003c\/p\u003e\n\u003cp data-start=\"4698\" data-end=\"4803\" style=\"text-align: center;\"\u003eThe app interface and automation features make it easy to set schedules and stabilise a grow environment.\u003c\/p\u003e\n\u003chr data-start=\"4806\" data-end=\"4809\"\u003e\n\u003ch2 data-start=\"4811\" data-end=\"4854\" style=\"text-align: center;\"\u003e🚀 Take control of your grow environment\u003c\/h2\u003e\n\u003cp data-start=\"4856\" data-end=\"4926\" style=\"text-align: center;\"\u003eIndoor growing becomes much easier when your equipment works together.\u003c\/p\u003e\n\u003cp data-start=\"4928\" data-end=\"5099\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"4932\" data-end=\"4967\"\u003eVIVOSUN GrowHub E42A Controller\u003c\/strong\u003e automates lighting, airflow, and environmental monitoring so growers can maintain stable conditions and focus on plant performance.\u003c\/p\u003e","brand":"Vivosun","offers":[{"title":"Default Title","offer_id":51208382710058,"sku":"VSN-E42A","price":139.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/GrowHub-E42A-Controller-by-VIVOSUN-smart-grow-environment-controller.jpg?v=1773916115"},{"product_id":"vivosun-usb-c-splitter-growhub-e42a-controller","title":"USB-C Splitter for GrowHub Controller E42A by VIVOSUN - smart grow controller expansion cable","description":"\u003ch2 data-start=\"686\" data-end=\"715\" style=\"text-align: center;\"\u003eThe problem this solves\u003c\/h2\u003e\n\u003cp data-start=\"717\" data-end=\"812\" style=\"text-align: center;\"\u003eSmart grow controllers are powerful, but a single port limits how many devices you can connect.\u003c\/p\u003e\n\u003cp data-start=\"814\" data-end=\"927\" style=\"text-align: center;\"\u003eAs your grow system expands, you need a simple way to link additional equipment without replacing the controller.\u003c\/p\u003e\n\u003cp data-start=\"929\" data-end=\"1086\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"933\" data-end=\"987\"\u003eVIVOSUN USB-C Splitter for GrowHub Controller E42A\u003c\/strong\u003e allows multiple SGS devices to connect through one controller port using a daisy-chain connection.\u003c\/p\u003e\n\u003chr data-start=\"1089\" data-end=\"1092\"\u003e\n\u003ch2 data-start=\"1094\" data-end=\"1119\" style=\"text-align: center;\"\u003e🔥 Why growers rate it\u003c\/h2\u003e\n\u003cp data-start=\"1121\" data-end=\"1654\" style=\"text-align: center;\"\u003e• Expands controller connectivity → connect multiple VIVOSUN devices to one E42A port\u003cbr data-start=\"1206\" data-end=\"1209\"\u003e• Daisy-chain functionality → link smart devices in a sequential control system\u003cbr data-start=\"1288\" data-end=\"1291\"\u003e• Plug-and-play setup → no software or drivers required\u003cbr data-start=\"1346\" data-end=\"1349\"\u003e• Reinforced braided cable → protects against twisting and daily wear\u003cbr data-start=\"1418\" data-end=\"1421\"\u003e• Triple-layer cable design → copper core with insulation for reliable signal transfer\u003cbr data-start=\"1507\" data-end=\"1510\"\u003e• Precision connectors → secure and stable device connections\u003cbr data-start=\"1571\" data-end=\"1574\"\u003e• Compatible with SGS ecosystem → works with supported VIVOSUN smart equipment\u003c\/p\u003e\n\u003chr data-start=\"1657\" data-end=\"1660\"\u003e\n\u003ch2 data-start=\"1662\" data-end=\"1677\" style=\"text-align: center;\"\u003e📦 Key specs\u003c\/h2\u003e\n\u003cp data-start=\"1679\" data-end=\"2001\" style=\"text-align: center;\"\u003e• Connector type: USB-C (1 male to 2 female)\u003cbr data-start=\"1723\" data-end=\"1726\"\u003e• Function: Controller port expansion \/ daisy-chain adapter\u003cbr data-start=\"1785\" data-end=\"1788\"\u003e• Cable construction: Copper core with insulated braided nylon jacket\u003cbr data-start=\"1857\" data-end=\"1860\"\u003e• Compatibility: VIVOSUN GrowHub E42A controller\u003cbr data-start=\"1908\" data-end=\"1911\"\u003e• Device support: VIVOSUN SGS smart equipment\u003cbr data-start=\"1956\" data-end=\"1959\"\u003e• Installation: Plug-and-play connection\u003c\/p\u003e\n\u003chr data-start=\"2004\" data-end=\"2007\"\u003e\n\u003ch2 data-start=\"2009\" data-end=\"2028\" style=\"text-align: center;\"\u003e🌱 Grow Guys tip\u003c\/h2\u003e\n\u003cp data-start=\"2030\" data-end=\"2094\" style=\"text-align: center;\"\u003eAs your grow system expands, cable management becomes important.\u003c\/p\u003e\n\u003cp data-start=\"2096\" data-end=\"2265\" style=\"text-align: center;\"\u003eUsing a \u003cstrong data-start=\"2104\" data-end=\"2150\"\u003eUSB-C splitter for your GrowHub controller\u003c\/strong\u003e makes it easier to integrate multiple smart devices without cluttering your grow tent with additional controllers.\u003c\/p\u003e\n\u003chr data-start=\"2268\" data-end=\"2271\"\u003e\n\u003ch2 data-start=\"2273\" data-end=\"2306\" style=\"text-align: center;\"\u003e🛠️ How to dial it in properly\u003c\/h2\u003e\n\u003ch3 data-start=\"2309\" data-end=\"2346\" style=\"text-align: center;\"\u003eConnect to the GrowHub controller\u003c\/h3\u003e\n\u003cp data-start=\"2348\" data-end=\"2423\" style=\"text-align: center;\"\u003ePlug the \u003cstrong data-start=\"2357\" data-end=\"2422\"\u003eUSB-C splitter directly into the GrowHub E42A controller port\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-start=\"2426\" data-end=\"2460\" style=\"text-align: center;\"\u003eDaisy-chain compatible devices\u003c\/h3\u003e\n\u003cp data-start=\"2462\" data-end=\"2538\" style=\"text-align: center;\"\u003eAttach supported \u003cstrong data-start=\"2479\" data-end=\"2502\"\u003eVIVOSUN SGS devices\u003c\/strong\u003e to the splitter’s two output ports.\u003c\/p\u003e\n\u003ch3 data-start=\"2541\" data-end=\"2572\" style=\"text-align: center;\"\u003eExpand your smart ecosystem\u003c\/h3\u003e\n\u003cp data-start=\"2574\" data-end=\"2684\" style=\"text-align: center;\"\u003eThis allows multiple devices to run through the same controller for \u003cstrong data-start=\"2642\" data-end=\"2683\"\u003ecentralised monitoring and automation\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-start=\"2687\" data-end=\"2709\" style=\"text-align: center;\"\u003eSecure connections\u003c\/h3\u003e\n\u003cp data-start=\"2711\" data-end=\"2787\" style=\"text-align: center;\"\u003eEnsure connectors are firmly seated to maintain stable device communication.\u003c\/p\u003e\n\u003ch3 data-start=\"2790\" data-end=\"2812\" style=\"text-align: center;\"\u003ePlan cable routing\u003c\/h3\u003e\n\u003cp data-start=\"2814\" data-end=\"2906\" style=\"text-align: center;\"\u003eKeep cables tidy along tent frames or controller mounts to prevent strain on the connectors.\u003c\/p\u003e\n\u003chr data-start=\"2909\" data-end=\"2912\"\u003e\n\u003ch2 data-start=\"2914\" data-end=\"2938\" style=\"text-align: center;\"\u003e🧩 What it pairs with\u003c\/h2\u003e\n\u003cp data-start=\"2940\" data-end=\"3035\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"2944\" data-end=\"2970\"\u003eVIVOSUN USB-C splitter\u003c\/strong\u003e is designed for growers expanding their GrowHub smart ecosystem.\u003c\/p\u003e\n\u003cp data-start=\"3037\" data-end=\"3205\" style=\"text-align: center;\"\u003eIt works alongside equipment like \u003cstrong data-start=\"3071\" data-end=\"3131\"\u003einline fans, clip fans, and other compatible SGS devices\u003c\/strong\u003e, allowing multiple components to communicate with the GrowHub controller.\u003c\/p\u003e\n\u003cp data-start=\"3207\" data-end=\"3390\" style=\"text-align: center;\"\u003eWhen paired with \u003cstrong data-start=\"3224\" data-end=\"3310\"\u003eenvironmental controllers, smart ventilation systems, and automated grow equipment\u003c\/strong\u003e, the splitter helps unify multiple devices into a single smart control network.\u003c\/p\u003e\n\u003cp data-start=\"3392\" data-end=\"3495\" style=\"text-align: center;\"\u003eThis makes it easier to manage airflow, lighting, and environmental monitoring from one central system.\u003c\/p\u003e\n\u003chr data-start=\"3498\" data-end=\"3501\"\u003e\n\u003ch2 data-start=\"3503\" data-end=\"3534\" style=\"text-align: center;\"\u003e❓ Frequently asked questions\u003c\/h2\u003e\n\u003ch3 data-start=\"3537\" data-end=\"3581\" style=\"text-align: center;\"\u003eWhat does the VIVOSUN USB-C splitter do?\u003c\/h3\u003e\n\u003cp data-start=\"3583\" data-end=\"3691\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"3587\" data-end=\"3613\"\u003eVIVOSUN USB-C splitter\u003c\/strong\u003e allows two compatible devices to connect to a single GrowHub controller port.\u003c\/p\u003e\n\u003cp data-start=\"3693\" data-end=\"3760\" style=\"text-align: center;\"\u003eThis expands the number of smart devices the controller can manage.\u003c\/p\u003e\n\u003ch3 data-start=\"3763\" data-end=\"3817\" style=\"text-align: center;\"\u003eIs the splitter compatible with all USB-C devices?\u003c\/h3\u003e\n\u003cp data-start=\"3819\" data-end=\"3924\" style=\"text-align: center;\"\u003eNo. The splitter is designed for \u003cstrong data-start=\"3852\" data-end=\"3885\"\u003eVIVOSUN SGS ecosystem devices\u003c\/strong\u003e that work with the GrowHub controller.\u003c\/p\u003e\n\u003ch3 data-start=\"3927\" data-end=\"3976\" style=\"text-align: center;\"\u003eDoes the splitter require any software setup?\u003c\/h3\u003e\n\u003cp data-start=\"3978\" data-end=\"4072\" style=\"text-align: center;\"\u003eNo. The splitter is \u003cstrong data-start=\"3998\" data-end=\"4015\"\u003eplug-and-play\u003c\/strong\u003e, meaning no drivers or additional software are required.\u003c\/p\u003e\n\u003ch3 data-start=\"4075\" data-end=\"4128\" style=\"text-align: center;\"\u003eWhat devices can be connected with this splitter?\u003c\/h3\u003e\n\u003cp data-start=\"4130\" data-end=\"4245\" style=\"text-align: center;\"\u003eThe splitter works with compatible \u003cstrong data-start=\"4165\" data-end=\"4188\"\u003eVIVOSUN SGS devices\u003c\/strong\u003e, such as smart inline fans and clip-on circulation fans.\u003c\/p\u003e\n\u003chr data-start=\"4248\" data-end=\"4251\"\u003e\n\u003ch2 data-start=\"4253\" data-end=\"4291\" style=\"text-align: center;\"\u003e🚀 Expand your GrowHub smart system\u003c\/h2\u003e\n\u003cp data-start=\"4293\" data-end=\"4380\" style=\"text-align: center;\"\u003eAs your indoor grow setup evolves, connecting multiple smart devices becomes essential.\u003c\/p\u003e\n\u003cp data-start=\"4382\" data-end=\"4535\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"4386\" data-end=\"4440\"\u003eVIVOSUN USB-C Splitter for GrowHub Controller E42A\u003c\/strong\u003e allows growers to expand their GrowHub ecosystem while keeping control simple and centralised.\u003c\/p\u003e","brand":"Vivosun","offers":[{"title":"Default Title","offer_id":51211156652330,"sku":"VSN-USBCSPLIT","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/USB-C-Splitter-for-GrowHub-Controller-E42A-by-VIVOSUN-smart-grow-controller-expansion-cable.webp?v=1773916210"},{"product_id":"vivosun-sgs-converter-type-c-to-molex-aux","title":"SGS Converter Type-C to Molex \u0026 AUX by VIVOSUN - GrowHub fan adapter cable","description":"\u003ch2 data-start=\"642\" data-end=\"671\" style=\"text-align: center;\"\u003eThe problem this solves\u003c\/h2\u003e\n\u003cp data-start=\"673\" data-end=\"756\" style=\"text-align: center;\"\u003eMany growers already own EC inline fans that aren't designed for smart controllers.\u003c\/p\u003e\n\u003cp data-start=\"758\" data-end=\"848\" style=\"text-align: center;\"\u003eWithout compatibility adapters, those fans can’t integrate with modern automation systems.\u003c\/p\u003e\n\u003cp data-start=\"850\" data-end=\"1059\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"854\" data-end=\"901\"\u003eVIVOSUN SGS Converter Type-C to Molex \u0026amp; AUX\u003c\/strong\u003e allows compatible EC fans to connect directly to the GrowHub E42 or E42A controller so they can be monitored and controlled through the smart grow ecosystem.\u003c\/p\u003e\n\u003chr data-start=\"1062\" data-end=\"1065\"\u003e\n\u003ch2 data-start=\"1067\" data-end=\"1092\" style=\"text-align: center;\"\u003e🔥 Why growers rate it\u003c\/h2\u003e\n\u003cp data-start=\"1094\" data-end=\"1641\" style=\"text-align: center;\"\u003e• Converts legacy EC fans → allows Molex and AUX fan connections to GrowHub controllers\u003cbr data-start=\"1181\" data-end=\"1184\"\u003e• Smart system integration → adds automation and remote control to existing equipment\u003cbr data-start=\"1269\" data-end=\"1272\"\u003e• Wide fan compatibility → supports EC fans from multiple brands\u003cbr data-start=\"1336\" data-end=\"1339\"\u003e• Gold-plated Type-C connector → reliable signal transfer and connection stability\u003cbr data-start=\"1421\" data-end=\"1424\"\u003e• UL-certified 5-core cable → safe and durable electrical performance\u003cbr data-start=\"1493\" data-end=\"1496\"\u003e• Plug-and-play setup → no software installation required\u003cbr data-start=\"1553\" data-end=\"1556\"\u003e• Durable PVC jacket construction → protects internal wiring and extends cable life\u003c\/p\u003e\n\u003chr data-start=\"1644\" data-end=\"1647\"\u003e\n\u003ch2 data-start=\"1649\" data-end=\"1664\" style=\"text-align: center;\"\u003e📦 Key specs\u003c\/h2\u003e\n\u003cp data-start=\"1666\" data-end=\"1948\" style=\"text-align: center;\"\u003e• Connector type: Type-C to Molex \u0026amp; AUX\u003cbr data-start=\"1705\" data-end=\"1708\"\u003e• Compatibility: GrowHub E42 and E42A controllers\u003cbr data-start=\"1757\" data-end=\"1760\"\u003e• Cable construction: Multi-layer wiring with PVC protective jacket\u003cbr data-start=\"1827\" data-end=\"1830\"\u003e• Certification: UL certified cable\u003cbr data-start=\"1865\" data-end=\"1868\"\u003e• Connector contacts: Gold-plated pins\u003cbr data-start=\"1906\" data-end=\"1909\"\u003e• Installation: Plug-and-play adapter\u003c\/p\u003e\n\u003chr data-start=\"1951\" data-end=\"1954\"\u003e\n\u003ch2 data-start=\"1956\" data-end=\"1975\" style=\"text-align: center;\"\u003e🌱 Grow Guys tip\u003c\/h2\u003e\n\u003cp data-start=\"1977\" data-end=\"2055\" style=\"text-align: center;\"\u003eIf you already own a quality EC fan, you don’t need to replace it to go smart.\u003c\/p\u003e\n\u003cp data-start=\"2057\" data-end=\"2214\" style=\"text-align: center;\"\u003eUsing the \u003cstrong data-start=\"2067\" data-end=\"2084\"\u003eSGS converter\u003c\/strong\u003e lets you integrate existing ventilation equipment into the GrowHub ecosystem and control it through automation or the mobile app.\u003c\/p\u003e\n\u003chr data-start=\"2217\" data-end=\"2220\"\u003e\n\u003ch2 data-start=\"2222\" data-end=\"2255\" style=\"text-align: center;\"\u003e🛠️ How to dial it in properly\u003c\/h2\u003e\n\u003ch3 data-start=\"2258\" data-end=\"2295\" style=\"text-align: center;\"\u003eConnect to the GrowHub controller\u003c\/h3\u003e\n\u003cp data-start=\"2297\" data-end=\"2367\" style=\"text-align: center;\"\u003ePlug the \u003cstrong data-start=\"2306\" data-end=\"2366\"\u003eType-C connector into the GrowHub E42 or E42A controller\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-start=\"2370\" data-end=\"2399\" style=\"text-align: center;\"\u003eAttach the fan connection\u003c\/h3\u003e\n\u003cp data-start=\"2401\" data-end=\"2474\" style=\"text-align: center;\"\u003eConnect your compatible \u003cstrong data-start=\"2425\" data-end=\"2458\"\u003eMolex or AUX EC fan connector\u003c\/strong\u003e to the adapter.\u003c\/p\u003e\n\u003ch3 data-start=\"2477\" data-end=\"2512\" style=\"text-align: center;\"\u003eConfigure in the GrowHub system\u003c\/h3\u003e\n\u003cp data-start=\"2514\" data-end=\"2598\" style=\"text-align: center;\"\u003eOnce connected, the fan can be \u003cstrong data-start=\"2545\" data-end=\"2597\"\u003emonitored and controlled through the VIVOSUN app\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-start=\"2601\" data-end=\"2621\" style=\"text-align: center;\"\u003eAutomate airflow\u003c\/h3\u003e\n\u003cp data-start=\"2623\" data-end=\"2736\" style=\"text-align: center;\"\u003eUse environmental triggers such as \u003cstrong data-start=\"2658\" data-end=\"2693\"\u003etemperature or humidity changes\u003c\/strong\u003e to automatically adjust ventilation speed.\u003c\/p\u003e\n\u003ch3 data-start=\"2739\" data-end=\"2763\" style=\"text-align: center;\"\u003eSecure cable routing\u003c\/h3\u003e\n\u003cp data-start=\"2765\" data-end=\"2861\" style=\"text-align: center;\"\u003eRoute cables along tent poles or equipment mounts to prevent strain or accidental disconnection.\u003c\/p\u003e\n\u003chr data-start=\"2864\" data-end=\"2867\"\u003e\n\u003ch2 data-start=\"2869\" data-end=\"2893\" style=\"text-align: center;\"\u003e🧩 What it pairs with\u003c\/h2\u003e\n\u003cp data-start=\"2895\" data-end=\"3017\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"2899\" data-end=\"2924\"\u003eVIVOSUN SGS Converter\u003c\/strong\u003e allows growers to integrate older EC ventilation equipment into the GrowHub smart ecosystem.\u003c\/p\u003e\n\u003cp data-start=\"3019\" data-end=\"3166\" style=\"text-align: center;\"\u003eThis adapter works alongside \u003cstrong data-start=\"3048\" data-end=\"3124\"\u003einline duct fans, GrowHub controllers, and smart grow monitoring systems\u003c\/strong\u003e to unify ventilation and climate control.\u003c\/p\u003e\n\u003cp data-start=\"3168\" data-end=\"3369\" style=\"text-align: center;\"\u003eWhen combined with \u003cstrong data-start=\"3187\" data-end=\"3269\"\u003etemperature and humidity sensors, smart controllers, and automated ventilation\u003c\/strong\u003e, growers can control airflow remotely and create stable environmental conditions inside grow tents.\u003c\/p\u003e\n\u003cp data-start=\"3371\" data-end=\"3475\" style=\"text-align: center;\"\u003eThis makes it easier to upgrade existing grow equipment without replacing your entire ventilation setup.\u003c\/p\u003e\n\u003chr data-start=\"3478\" data-end=\"3481\"\u003e\n\u003ch2 data-start=\"3483\" data-end=\"3514\" style=\"text-align: center;\"\u003e❓ Frequently asked questions\u003c\/h2\u003e\n\u003ch3 data-start=\"3517\" data-end=\"3560\" style=\"text-align: center;\"\u003eWhat does the VIVOSUN SGS converter do?\u003c\/h3\u003e\n\u003cp data-start=\"3562\" data-end=\"3687\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"3566\" data-end=\"3591\"\u003eVIVOSUN SGS converter\u003c\/strong\u003e connects compatible EC fans with Molex or AUX connectors to the GrowHub E42 or E42A controller.\u003c\/p\u003e\n\u003cp data-start=\"3689\" data-end=\"3759\" style=\"text-align: center;\"\u003eThis allows those fans to be controlled through the smart grow system.\u003c\/p\u003e\n\u003ch3 data-start=\"3762\" data-end=\"3811\" style=\"text-align: center;\"\u003eWhich fans are compatible with the converter?\u003c\/h3\u003e\n\u003cp data-start=\"3813\" data-end=\"3930\" style=\"text-align: center;\"\u003eThe adapter works with \u003cstrong data-start=\"3836\" data-end=\"3880\"\u003eEC fans that use Molex or AUX connectors\u003c\/strong\u003e, including certain inline fans from other brands.\u003c\/p\u003e\n\u003ch3 data-start=\"3933\" data-end=\"3986\" style=\"text-align: center;\"\u003eDoes the converter require software installation?\u003c\/h3\u003e\n\u003cp data-start=\"3988\" data-end=\"4081\" style=\"text-align: center;\"\u003eNo. The converter is \u003cstrong data-start=\"4009\" data-end=\"4026\"\u003eplug-and-play\u003c\/strong\u003e, meaning no additional drivers or software are needed.\u003c\/p\u003e\n\u003ch3 data-start=\"4084\" data-end=\"4134\" style=\"text-align: center;\"\u003eCan older fans be automated with this adapter?\u003c\/h3\u003e\n\u003cp data-start=\"4136\" data-end=\"4269\" style=\"text-align: center;\"\u003eYes. Once connected to the GrowHub controller, compatible fans can be \u003cstrong data-start=\"4206\" data-end=\"4268\"\u003econtrolled remotely and programmed through the VIVOSUN app\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"4272\" data-end=\"4275\"\u003e\n\u003ch2 data-start=\"4277\" data-end=\"4339\" style=\"text-align: center;\"\u003e🚀 Bring older ventilation gear into your smart grow system\u003c\/h2\u003e\n\u003cp data-start=\"4341\" data-end=\"4418\" style=\"text-align: center;\"\u003eUpgrading your grow environment doesn’t always mean replacing your equipment.\u003c\/p\u003e\n\u003cp data-start=\"4420\" data-end=\"4590\" style=\"text-align: center;\"\u003eThe \u003cstrong data-start=\"4424\" data-end=\"4471\"\u003eVIVOSUN SGS Converter Type-C to Molex \u0026amp; AUX\u003c\/strong\u003e allows existing EC fans to integrate with the GrowHub ecosystem so you can unlock smart automation and remote control.\u003c\/p\u003e","brand":"Vivosun","offers":[{"title":"Default Title","offer_id":51211631821098,"sku":"VSN-SGSCONV","price":11.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/SGS-Converter-Type-C-to-Molex-AUX-by-VIVOSUN-GrowHub-fan-adapter-cable.jpg?v=1773916223"},{"product_id":"treegers-precise-t-dimmer","title":"Treegers Precise T Dimmer — 0–10V LED Grow Light Dimmer Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    Your Treegers LED fixture ships without a dimmer — and without one, it runs at full power only. The Precise T Dimmer fixes that with a tactile T-knob that steps from 0% to 100% in clean 10% increments, a 3-metre cable that gives you real placement flexibility, and the grunt to control up to 50 fixtures from a single unit without voltage drops. No apps, no pairing, no configuration. Plug it in, turn the knob, done.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e10% Step Dimming\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEleven precise settings from off to full output. Dial in the right intensity for seedlings, veg, and flower without guesswork.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eControls Up to 50 Fixtures\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eOne dimmer runs up to 50 linked Treegers fixtures at consistent output — no voltage drop across the chain.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3-Metre Cable\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEnough reach to mount the control knob outside your tent or on a nearby wall where you can actually get to it.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Cable and Connector\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe cable and connector are IP67 rated. Built for the humid, wet reality of a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug-and-Play Simple\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eNo app, no pairing, no config. Connects directly to all Treegers LED fixtures via LLT-M12 self-locking connector.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eMounting Plate Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eComes with a mounting plate and 3M tape so you can fix the dimmer box neatly to a tent pole or wall panel.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TPTD001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188078\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Range:\u003c\/strong\u003e 0% – 10% – 20% – 30% – 40% – 50% – 60% – 70% – 80% – 90% – 100%\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eControl Protocol:\u003c\/strong\u003e 0–10V\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eFixture Capacity:\u003c\/strong\u003e 20–50 fixtures\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e LLT-M12-3 core male (self-locking elbow)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current:\u003c\/strong\u003e DC12V \/ 150mA\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimmer Box IP Rating:\u003c\/strong\u003e IP20\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable \/ Connector IP Rating:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 82 x 50 x 38.4mm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 201g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e IEC60669\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Precise T Dimmer\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eIncludes 3-metre cable and LLT-M12 self-locking connector — ready to plug straight into your Treegers fixture.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Mounting Plate\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWith 3M adhesive tape for a clean, fixed mount on tent poles, walls, or equipment racks.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eT Dimmer or Growcast — Which One Do You Need?\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThe Precise T Dimmer is for growers who want simple, reliable manual control — turn the knob, set the level, walk away.\u003c\/li\u003e\n      \u003cli\u003eThe Growcast is for growers who want full automation — programmed sunrise\/sunset ramps, app control, and multi-room scheduling.\u003c\/li\u003e\n      \u003cli\u003eFor a single tent with no automation needs, the T Dimmer is everything you need and nothing you don't.\u003c\/li\u003e\n      \u003cli\u003eBoth use the same 0–10V connector, so you can upgrade to the Growcast later without changing any fixture wiring.\u003c\/li\u003e\n      \u003cli\u003eNot sure? Hit up The Grow Guys and we'll help you figure out the right controller for your setup.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set Up the Precise T Dimmer\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off your fixture before connecting\u003c\/strong\u003e — Always connect the dimmer before switching power on. This protects the control circuitry and ensures a clean startup at the correct intensity setting.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect to your fixture's control port\u003c\/strong\u003e — The LLT-M12 self-locking connector clicks into the matching control port on your Treegers fixture. Push until it locks. No tools needed.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the dimmer box within reach\u003c\/strong\u003e — Use the included mounting plate and 3M tape to fix the unit on the outside of your tent or on a nearby surface. The 3-metre cable gives you good flexibility for positioning.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSet intensity to match your growth stage\u003c\/strong\u003e — Start seedlings and clones at 30–50%. Ramp veg up to 60–80% as the canopy develops. Push to 90–100% in peak flower once your plants have proven they can handle the load.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eLink multiple fixtures with Fixture Link Cables\u003c\/strong\u003e — To control more than one fixture from the same dimmer, connect them in series using Treegers Fixture Link Cables (sold separately). One T Dimmer can handle up to 50 fixtures with no voltage drop across the chain.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer is the most affordable way to unlock the full 0–100% dimming range on the GL420W. Plug in, dial in.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a bigger room? The T Dimmer handles the GL650W+ with the same plug-and-play connection.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePrefer manual control over a smart controller? The T Dimmer connects directly to the GL1000W+ via the same LLT port.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-fixture-link-cable\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Fixture Link Cable\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eDaisy-chain multiple Treegers fixtures to a single T Dimmer. One cable per additional fixture in the chain.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eReady to go further? The Growcast adds app control, automated schedules, and sunrise\/sunset ramping — same connector, straight swap.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer mounts cleanly to any tent frame with the included plate. A natural fit for a complete tent build.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the Precise T Dimmer compatible with all Treegers fixtures?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Precise T Dimmer works with all current Treegers LED fixtures including the GL300W, GL420W, GL650W+, and GL1000W+. It also works with any other 0–10V device using matching waterproof joint wiring.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control multiple fixtures from one T Dimmer?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — one Precise T Dimmer can control between 20 and 50 Treegers LED fixtures at full precision with no voltage drop. Use Treegers Fixture Link Cables (sold separately) to connect fixtures in series from the dimmer.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat is the difference between the T Dimmer and the Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe T Dimmer is a manual dial controller — you set the intensity by hand and it stays there until you change it. The Growcast is a smart controller with app connectivity, automated scheduling, sunrise\/sunset ramping, and multi-room capability. Both use the same 0–10V connection, so you can start with the T Dimmer and upgrade to the Growcast later without touching your fixture wiring.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat happens if I run a Treegers fixture without a dimmer connected?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eWithout a controller connected, Treegers fixtures run at 100% output. That is fine for established plants in flower but too intense for seedlings, clones, or early veg. Connecting the T Dimmer lets you throttle back and protect young plants while they establish.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the dimmer waterproof?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003ePartially — the cable and connector are rated IP67, meaning they are fully protected against water ingress in grow room conditions. The dimmer box itself is rated IP20, so keep it outside the tent or away from direct water exposure. The included mounting plate makes it easy to fix the unit on the exterior of your tent.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the T Dimmer work with non-Treegers LED lights?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, it can — provided the fixture uses matching waterproof joint wiring and accepts a standard 0–10V control signal. Not all LED brands use the same connector standard, so check your fixture's control port before purchasing. Contact The Grow Guys if you need help confirming compatibility.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eSimple Control. Zero Fuss.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Precise T Dimmer is the fastest, most affordable way to unlock proper intensity control on your Treegers setup. Questions about compatibility or which controller suits your grow? The Grow Guys team is here to help.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51304964522282', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51304964522282,"sku":"TRG-ACC-DIM-0-10V","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-Precise-T-Dimmer-0-10V-LED-Grow-Light-Dimmer-Controller.webp?v=1774917754"},{"product_id":"treegers-fixture-link-cable","title":"Treegers Fixture Link Cable — 4m Daisy-Chain Cable for Treegers LED Fixtures","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    If you're running more than one Treegers fixture from a single controller or dimmer, you need this cable. The Fixture Link Cable connects the signal output of one fixture to the signal input of the next, creating a daisy-chained series that lets your T Dimmer or Growcast talk to all of them at once. Four metres of IP67-rated cable, a self-locking LLT-M12 connector on each end, and a 2-year warranty. One cable per additional fixture — that's the whole story.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eDaisy-Chain Up to 50 Fixtures\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eLink fixture to fixture in series. One T Dimmer or Growcast controls the entire chain with consistent signal across all units.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFully sealed against moisture and dust ingress. Rated for the wet, humid conditions of a real grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e4-Metre Length\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEnough reach to span fixtures spaced across a 1.2m tent or connect lights in adjacent rooms.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSelf-Locking LLT-M12 Connector\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMale-female docking connector clicks and locks into place. Won't work loose in a vibrating grow room environment.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eWorks with T Dimmer and Growcast\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eCompatible with both Treegers controllers. One cable type, one connector standard, every setup sorted.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBacked by Treegers' standard accessory warranty. Built to last the distance across long cycles.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TFLK001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188108\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Any fixture with LLT M12 3-pin connector (1PIN-Dim+ \/ 2PIN-Dim- \/ 3PIN-12V)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e LLT M12-3 core male-female docking self-locking elbow\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current:\u003c\/strong\u003e 110V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 4 metres\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 175g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL E481414\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Fixture Link Cable — 4m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWith LLT M12-3 core male-female self-locking connectors on both ends. Ready to use out of the bag.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eHow Many Cables Do You Need?\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eYou need one Fixture Link Cable for each additional fixture beyond the first. Two fixtures = one cable. Three fixtures = two cables. And so on.\u003c\/li\u003e\n      \u003cli\u003eThe controller or dimmer connects to your first fixture directly — the Fixture Link Cable bridges from that fixture's signal output to the next fixture's signal input.\u003c\/li\u003e\n      \u003cli\u003eUp to 50 Treegers fixtures can be linked in a single chain from one T Dimmer or Growcast.\u003c\/li\u003e\n      \u003cli\u003eThis cable is for the signal \/ dimming connection only — each fixture still needs its own power cable connected separately.\u003c\/li\u003e\n      \u003cli\u003eNot sure how many you need for your setup? Ask The Grow Guys and we'll count it out with you.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Daisy-Chain Your Fixtures\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off all fixtures before connecting\u003c\/strong\u003e — Always wire your signal chain before switching power on. Connect everything first, then energise the circuit.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect your controller to the first fixture\u003c\/strong\u003e — Plug your T Dimmer or Growcast into the signal input port on Fixture 1. This is the master connection point for the entire chain.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eRun a Fixture Link Cable from Fixture 1 to Fixture 2\u003c\/strong\u003e — Connect one end to the signal output port on Fixture 1, and the other end to the signal input port on Fixture 2. The LLT connector clicks and locks — push firmly until you feel it seat.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eRepeat for each additional fixture\u003c\/strong\u003e — Use one Fixture Link Cable per additional light, running from the signal output of the previous fixture to the signal input of the next. Continue until all lights are chained.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect power to each fixture individually, then power on\u003c\/strong\u003e — The Fixture Link Cable handles signal only. Each fixture still needs its own power cable. Once all connections are made, switch on and confirm all fixtures respond to the controller.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning two or more GL420W fixtures? You'll need one Fixture Link Cable per additional light to sync them from a single controller.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMulti-light rooms built around the GL650W+ use the same Fixture Link Cable to chain fixtures under one controller.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning multiple GL1000W+ fixtures in a large room? Chain them all from one Growcast with Fixture Link Cables between each light.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer drives the whole chain. Add Fixture Link Cables to extend its reach across multiple fixtures.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eFor automated multi-light rooms, the Growcast pairs with Fixture Link Cables to control up to 50 fixtures on a single schedule.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eLarger tents often benefit from two fixtures side by side. The 4m cable gives you enough reach for most tent configurations.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many Fixture Link Cables do I need for my setup?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYou need one cable per additional fixture beyond the first. Two fixtures requires one cable. Three fixtures requires two cables. The controller always connects directly to the first fixture — the Fixture Link Cables handle signal between all subsequent fixtures in the chain.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this cable carry power as well as the dimming signal?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Fixture Link Cable carries the control signal only. Each fixture in the chain still requires its own separate power cable connected to a mains outlet. Do not attempt to power fixtures through the Fixture Link Cable.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the Fixture Link Cable compatible with both the T Dimmer and the Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Fixture Link Cable works with both the Treegers Precise T Dimmer and the Treegers Growcast controller, as well as any other controller using the same LLT M12 3-pin connector and 0–10V signal standard.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this cable work with non-Treegers LED fixtures?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, potentially — the cable is compatible with any fixture that uses an LLT M12 3-pin connector with the standard 1PIN-Dim+ \/ 2PIN-Dim- \/ 3PIN-12V pinout. Not all brands use this connector, so check your fixture's control port spec before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs 4 metres long enough for most grow setups?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, for the majority of tent-based setups. The 4-metre length comfortably spans two fixtures mounted side by side in a 1.2m or larger tent, with cable to spare for routing around obstacles. For very large commercial rooms where fixtures are spread further apart, check your fixture spacing before ordering.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many fixtures can I chain together in total?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUp to 50 Treegers fixtures can be linked in a single chain from one controller or dimmer. If you're planning a large multi-light room, contact The Grow Guys to confirm your cable and controller requirements before you set up.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eOne Cable Per Fixture. Every Light in Sync.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Fixture Link Cable is the missing piece in any multi-light Treegers setup. Not sure how many you need or how to wire your room? The Grow Guys team will count it out with you.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51304974876970', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51304974876970,"sku":"TRG-ACC-CBL-4M","price":23.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-Fixture-Link-Cable-4m-Daisy-Chain-Cable-for-Treegers-LED-Fixtures.webp?v=1774917768"},{"product_id":"treegers-universal-rj10v-connection-cable","title":"Treegers Universal RJ-10V Connection Cable — 4m LLT M12 to RJ11 Dimming Cable","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    Already running a universal controller — AC Infinity, Lumatek, or another brand that uses an RJ connector — and want to bring your Treegers fixtures under its control? This is the cable that makes it happen. The Universal RJ-10V 3-Pin Connection Cable bridges the LLT M12 connector on your Treegers fixture to the RJ11 port on any third-party 0–10V universal controller. Four metres of reach, one self-locking connector on each end, and the job is done.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eUniversal Controller Compatibility\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eConnects Treegers LED fixtures to any third-party controller with a standard RJ11 \/ 0–10V control port.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eLLT M12 to RJ11 Adapter\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking LLT M12 on the fixture end, RJ11 on the controller end. Two different connector standards bridged cleanly in one cable.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e4-Metre Length\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEnough reach to connect a wall-mounted controller to fixtures hung anywhere in a standard grow tent or room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug-and-Play Integration\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eNo adapters, no soldering, no workarounds. One cable connects your existing controller directly to your Treegers fixture.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eDual UL Certification\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eCertified under UL E481414 for the connector and UL E309471 for the wire. Tested and compliant, not guesswork.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBacked by Treegers. For a $22.50 adapter cable, covered is covered.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TUCC001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188115\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Any fixture with LLT M12 3-pin connector and any universal controller with RJ11 connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e LLT M12-3 core male docking self-locking elbow (fixture end) \/ RJ11 (controller end)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current:\u003c\/strong\u003e 30V \/ 1A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP20\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 4 metres\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 175g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL E481414 (Connector) \/ UL E309471 (Wire)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Universal RJ-10V 3-Pin Cable — 4m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eLLT M12 self-locking connector on the fixture end, RJ11 on the controller end. Ready to use straight out of the bag.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eWhich Cable Do You Actually Need?\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eUsing a Treegers Precise T Dimmer or Growcast? You do not need this cable — the T Dimmer and Growcast connect directly to Treegers fixtures via the LLT M12 connector.\u003c\/li\u003e\n      \u003cli\u003eUsing a third-party universal controller with an RJ11 port (AC Infinity, Lumatek, etc.)? This is the cable you need.\u003c\/li\u003e\n      \u003cli\u003eLinking two or more Treegers fixtures together in a chain? That requires the Fixture Link Cable (TFLK001), not this one.\u003c\/li\u003e\n      \u003cli\u003eNot sure which cable applies to your controller? Bring us the brand and model of your controller and we'll confirm before you buy.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Connect a Universal Controller to Your Treegers Fixture\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConfirm your controller uses an RJ11 \/ 0–10V output port\u003c\/strong\u003e — Check the control output port on your universal controller. It should be labelled as a 0–10V dimming output and use an RJ11 connector. If your controller uses a different port type, this cable will not fit.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off both the fixture and the controller before connecting\u003c\/strong\u003e — Always make signal connections before energising either device. This protects both the fixture's control circuitry and your controller's output port.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the LLT M12 end to your Treegers fixture\u003c\/strong\u003e — Locate the signal input port on your Treegers fixture. Push the LLT M12 connector in firmly until it clicks and locks. Give it a gentle pull to confirm it is seated.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the RJ11 end to your universal controller's dimming output\u003c\/strong\u003e — Plug the RJ11 connector into the 0–10V dimming output port on your controller. Refer to your controller's manual to confirm you're using the correct port if it has multiple RJ outputs.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower on and confirm control response\u003c\/strong\u003e — Switch on the controller first, then the fixture. Adjust the dimming output on your controller and confirm the fixture responds. If the fixture does not respond, check your controller's output type is 0–10V and not a different standard such as PWM or DALI.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eBring the GL420W into your existing controller ecosystem with this cable. One connection and it's under your controller's command.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAdding a GL650W+ to a room already running a universal controller? This cable connects it without disrupting your existing setup.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eIntegrating the GL1000W+ into a universal controller setup? Same connection — LLT M12 to your controller's RJ11 port.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-fixture-link-cable\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Fixture Link Cable\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning multiple Treegers fixtures? Use this cable for the first fixture, then Fixture Link Cables to chain the rest.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePrefer to stay in the Treegers ecosystem? The Growcast connects without an adapter cable and adds full scheduling and app control.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eBrowse the TGG controller range. If your preferred controller uses an RJ11 dimming output, this cable bridges it to any Treegers fixture.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat is the difference between this cable and the Fixture Link Cable?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe Fixture Link Cable connects one Treegers fixture to another Treegers fixture in a daisy-chain series — it carries signal between fixtures only. The Universal RJ-10V Cable connects a Treegers fixture to a third-party universal controller with an RJ11 port — it bridges two different connector standards. They serve different purposes and are not interchangeable.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need this cable if I'm using the Treegers T Dimmer or Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Treegers Precise T Dimmer and Growcast both use the same LLT M12 connector as Treegers fixtures and connect directly without any adapter cable. This cable is only needed when integrating with a third-party controller that uses an RJ11 output.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhich third-party controllers is this cable compatible with?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThis cable works with any universal controller that outputs a standard 0–10V dimming signal through an RJ11 port. Many popular environmental and lighting controllers across brands like AC Infinity and Lumatek use this standard. Check your controller's spec sheet to confirm its output port type is RJ11 and its signal standard is 0–10V before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the cable waterproof?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this cable is rated IP20, which means it has basic protection against solid objects but is not sealed against moisture. It should be kept away from direct water exposure. For most grow room setups where the cable runs from a wall-mounted controller to a fixture, this is not an issue.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I use this cable to daisy-chain multiple Treegers fixtures to a universal controller?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003ePartially — this cable connects your universal controller to the first fixture only. To extend control to additional Treegers fixtures in the chain, use standard Treegers Fixture Link Cables from that fixture's signal output to each subsequent fixture. One Universal RJ-10V Cable to start the chain, then Fixture Link Cables to extend it.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this cable work with PWM or DALI controllers?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — Treegers fixtures use a 0–10V dimming signal standard. PWM and DALI are different control protocols and are not compatible, even if the physical connector fits. Always confirm your controller outputs a true 0–10V analog signal before purchasing this cable.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eYour Controller. Your Treegers Fixtures. One Cable.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Universal RJ-10V Cable slots your Treegers lights into whatever control system you are already running. Not sure if your controller is compatible? The Grow Guys team will confirm it for you before you buy.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51304976875818', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51304976875818,"sku":"TRG-ACC-CBL-RJ10V","price":22.49,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-Universal-RJ-10V-Connection-Cable-4m-LLT-M12-to-RJ11-Dimming-Cable.webp?v=1774917773"},{"product_id":"growcast","title":"Growcast by Treegers — Bluetooth Mesh Horticultural Lighting Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The Treegers Growcast is the step up from a simple dimmer knob to a fully automated lighting system. A pea-sized, IP66-rated controller that connects to up to 50 fixtures via daisy-chain, runs on Bluetooth Mesh without needing WiFi or a login, and lets you set schedules, sunrise\/sunset ramps, and accurate PPFD targets from the free Telos app on your phone. It works with Treegers fixtures natively and with any dimmable grow light from other brands using the included adapters. One Growcast. Total control.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eControls Up to 50 Fixtures\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDaisy-chain up to 50 Treegers fixtures to a single Growcast. Scale from one tent to a full commercial room without adding controllers.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo WiFi. No Login. No Registration.\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBluetooth Mesh 5.3 runs a private decentralised network. Nothing goes to a cloud. Just open the Telos app and connect.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSunrise and Sunset Automation\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eProgram gradual ramp-up and ramp-down cycles that mimic natural light transitions. Better for your plants, less heat stress.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAccurate PPFD Dimming\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet real PPFD targets instead of guessing at percentages. Map your grow room's photon data and hit actual light levels with precision.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP66 Rated — Built for the Grow Room\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003e32 x 32 x 22mm, 80g, and IP66 rated. Mount it inside the tent. It handles dust and water without complaint.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eUniversal Compatibility\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWorks with Treegers fixtures natively and with any dimmable grow light using 1–10V or PWM via the included RJ11 adapters.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TGC0001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnection Interface:\u003c\/strong\u003e LLT Connector + RJ11 and linking adaptors\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eUser Interface:\u003c\/strong\u003e Smartphone app or manual touch sensor\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Range:\u003c\/strong\u003e 10–100% and dim to off\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Protocol:\u003c\/strong\u003e 1–10V or PWM\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e USB-C cable or 12V supply from LED driver\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWireless Technology:\u003c\/strong\u003e Bluetooth Mesh version 5.3\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eControl App:\u003c\/strong\u003e Telos Mesh\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eApp Availability:\u003c\/strong\u003e Android and iOS\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP66\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 32 x 32 x 22mm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 80g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 250mm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Treegers Growcast Controller\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe controller unit itself — compact, IP66 rated, with 250mm cable and LLT connector.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x 2m USB-C Cable\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFor powering the Growcast from a USB-C power source when not powered via the LED driver.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x RJ11 Adapter Type 1 + Type 2\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTwo RJ11 adapters for connecting the Growcast to non-Treegers dimmable LED fixtures from other manufacturers.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Steel Mounting Plate\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFor a clean, secure installation inside your tent or grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Treegers Storage Tin\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFor storing adapters and accessories neatly when not in use.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x User Guide\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSetup instructions and app guidance to get you connected quickly.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrowcast vs T Dimmer — Know the Difference Before You Buy\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThe T Dimmer is a manual knob. Set it by hand, leave it alone. No app, no scheduling, no automation. Perfect for simple single-tent setups.\u003c\/li\u003e\n      \u003cli\u003eThe Growcast is a smart controller. Set schedules, sunrise\/sunset ramps, PPFD targets, and multi-room sequences from your phone. Made for growers who want hands-off automation.\u003c\/li\u003e\n      \u003cli\u003eIf you check your tent daily and prefer to adjust manually, save the money and get the T Dimmer.\u003c\/li\u003e\n      \u003cli\u003eIf you want your lights to handle themselves — scheduled on\/off, gradual ramps, accurate dimming — the Growcast earns its $275.\u003c\/li\u003e\n      \u003cli\u003eBoth connect to Treegers fixtures via the same LLT connector. Upgrading from T Dimmer to Growcast later is a straight swap.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set Up the Growcast\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDownload the Telos Mesh app\u003c\/strong\u003e — Available free on Android and iOS. No login, no registration, no account required. Open it once and it's ready to connect.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off your fixtures before connecting\u003c\/strong\u003e — Wire the signal connections first, then energise. Connect the Growcast's LLT connector to the signal input port on your first Treegers fixture.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDaisy-chain additional fixtures with Fixture Link Cables\u003c\/strong\u003e — For multi-light setups, run a Fixture Link Cable from the signal output of your first fixture to the signal input of the second, and repeat for each additional light. Up to 50 fixtures can be chained from one Growcast.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower the Growcast\u003c\/strong\u003e — Either plug the USB-C cable into a USB power source, or power it from the LED driver's 12V supply port if your fixture supports this. The Growcast will begin broadcasting its Bluetooth Mesh network automatically.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eAdd the Growcast in the Telos app\u003c\/strong\u003e — Open the Telos Mesh app, tap \"add,\" and the app will detect the newly formed Bluetooth Mesh network. Select it to pair. No WiFi, no passwords, no cloud sync required.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eProgram your schedule, ramps, and PPFD targets\u003c\/strong\u003e — Set on\/off times, sunrise and sunset ramp durations, and target PPFD values directly in the app. Once set, the Growcast runs independently — no phone needed after setup. Adjust anytime from Bluetooth range.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe Growcast is the natural upgrade path from a basic T Dimmer on the GL420W. One cable swap and you're fully automated.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eLarger rooms running the GL650W+ benefit most from the Growcast's scheduling and PPFD targeting capabilities.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAt 1000W, the Growcast's automated scheduling and ramp control is highly recommended — running this fixture manually at full blast from day one is rarely the right move.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-fixture-link-cable\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Fixture Link Cable\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eOne Fixture Link Cable per additional light in your chain. Essential for any multi-fixture Growcast setup.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-quantum-par-meter\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Quantum PAR Meter\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eTo use the Growcast's PPFD targeting properly, you need measured canopy data. The Treegers PAR Meter gives you those numbers.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePair the Growcast's light automation with a separate environment controller handling temperature, humidity, and ventilation for a fully automated grow room.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the Growcast need WiFi to work?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Growcast runs on Bluetooth Mesh 5.3, which creates its own private decentralised network without any WiFi, router, or internet connection required. It also does not require a login or account registration to use the Telos app. Your data stays on your device.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many lights can one Growcast control?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eOne Growcast can control up to 50 Treegers fixtures in a single daisy-chain using Fixture Link Cables. The Bluetooth Mesh protocol supports 1 to 1000 lights across a network — for grows larger than 50 fixtures, additional Growcast units can be networked together on the same Telos app.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill the Growcast work with non-Treegers LED fixtures?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Growcast is designed to be brand-agnostic. It works with any dimmable grow light that accepts a 1–10V or PWM control signal using the included RJ11 Type 1 and Type 2 adapters. Check your fixture's control input type against those standards to confirm compatibility before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat does PPFD dimming actually do?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eMost dimmers show a percentage — but a 50% setting doesn't always mean 50% of actual light output, because light output isn't perfectly linear with power input. The Growcast's PPFD dimming lets you input your canopy's measured PPFD data and set a real target light level in μmol\/m2\/s rather than guessing at percentages. This requires a PAR meter reading to be useful — the Treegers Quantum PAR Meter is the recommended tool for this.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the schedule keep running if my phone is out of Bluetooth range?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — once a schedule is programmed into the Growcast via the app, it stores and runs the schedule autonomously. The phone only needs to be in Bluetooth range to make changes or monitor the system. Your lights will follow the set schedule regardless of whether your phone is nearby.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control the Growcast manually without the app?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Growcast includes a manual touch sensor for basic control without the app. The Telos app unlocks the full feature set including scheduling, PPFD targeting, and sunrise\/sunset ramps, but the touch sensor gives you a fallback option if needed.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I still need Fixture Link Cables with the Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — for multi-fixture setups, the Growcast connects to your first fixture directly and Treegers Fixture Link Cables (sold separately) chain the signal through each subsequent fixture. One Fixture Link Cable per additional light beyond the first. The Growcast does not control fixtures wirelessly — the signal runs through the physical cable chain.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eSet It. Schedule It. Walk Away.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Growcast turns your Treegers setup into a fully automated lighting system. No WiFi, no subscriptions, no fuss. Questions about compatibility or setting up your room? The Grow Guys team has you covered.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51305053585706', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51305053585706,"sku":"TRG-CTRL-GCT-BT53","price":274.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Growcast-by-Treegers-Bluetooth-Mesh-Horticultural-Lighting-Controller.webp?v=1774917776"},{"product_id":"treegers-gl650w-plus-driver-extension-kit","title":"Treegers GL650W+ Driver Extension Kit — 3m Power and Dimming Cable Set","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The GL650W+ driver mounts remotely by design — but the standard cabling that ships with the fixture only gets you so far. If your room layout means the driver needs to sit more than arm's reach from the fixture frame, this kit is what you need. Two 3-metre extension cables — one for power, one for dimming — that replace the stock connections and let you position the GL650W+ driver up to 3 metres away from the bars without any voltage drop or signal loss. Nothing more, nothing less.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3 Metres of Driver Clearance\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMount the GL650W+ driver up to 3 metres from the fixture frame — on a wall, outside the tent, or on an adjacent rack — without power or signal loss.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTwo Cables Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eOne power extension cable and one dimming extension cable — both required for full remote driver operation, both in the kit.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBoth cables carry IP67 protection — fully sealed against moisture and dust, built to survive the conditions of a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Voltage Drop\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRated at 300V\/600V and 20A\/10A respectively. Designed specifically for the GL650W+ driver load — no derating, no compromise.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eJnicon M19 Connectors\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking Jnicon connectors match the GL650W+ driver and frame ports exactly. Click in, lock, done.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUL-certified cables backed by Treegers' 2-year accessory warranty.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TDEK001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188085\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GL650W+ fixtures with Jnicon M19 3-pin connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Jnicon 53-100331-02 \/ 53-200311-02 (power); Jnicon 54-100331-02 \/ 54-200311-02 (dimming)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Power Cable:\u003c\/strong\u003e 300V \/ 20A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Dimming Cable:\u003c\/strong\u003e 600V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres each\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600g (power cable); 200g (dimming cable)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL2238 E500203\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Power Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Replaces the stock power connection between the GL650W+ driver and fixture frame.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Dimming Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Extends the dimming signal connection from the driver to the fixture without signal degradation.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGL650W+ Only — This Kit Is Not Universal\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThis kit is designed exclusively for the GL650W+ fixture. It uses Jnicon M19 connectors specific to that driver and frame — it will not fit the GL1000W+ or any other Treegers model.\u003c\/li\u003e\n      \u003cli\u003eIf you are running a GL1000W+, there is a separate GL1000W+ Driver Extension Kit available. The GL1000W+ kit includes three cables (two power, one dimming) to match that fixture's driver configuration.\u003c\/li\u003e\n      \u003cli\u003eBoth the power and dimming cables in this kit must be installed together. Running only the power extension without replacing the dimming cable will leave the signal path on the shorter stock cable.\u003c\/li\u003e\n      \u003cli\u003eThe 3-metre extension is the maximum rated distance for this kit. Do not attempt to chain two kits together to gain 6 metres — this is not rated or supported by Treegers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Install the Driver Extension Kit\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower everything off before disconnecting anything\u003c\/strong\u003e — Disconnect the GL650W+ from mains power and allow it to fully cool before touching any cables or connections. Never work on a live fixture.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect the stock power cable from the driver and frame\u003c\/strong\u003e — The original power cable between the GL650W+ driver and frame uses the same Jnicon M19 connector as this kit. Twist the locking ring to release, pull the connector clear, and set the stock cable aside.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the power extension cable in its place\u003c\/strong\u003e — Run the 3-metre power extension cable from the driver to the fixture frame. Push each Jnicon connector in firmly until the locking ring engages. Route the cable cleanly to avoid pinch points or excessive tension.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eReplace the dimming cable in the same way\u003c\/strong\u003e — Disconnect the stock dimming cable and connect the 3-metre dimming extension in its place, running it alongside the power cable to the same remote driver position. Lock both Jnicon connectors at each end.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the driver at the desired remote location\u003c\/strong\u003e — Use the GL650W+ driver support brackets (included with the fixture) to secure the driver on a tent wall, equipment rail, or adjacent surface at the full 3-metre extension distance. Ensure it has airflow around it.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower on and verify normal operation\u003c\/strong\u003e — Reconnect mains power and confirm the fixture powers up correctly and responds to your controller or dimmer. If the fixture does not respond to dimming commands, check the dimming cable connections at both ends first.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThis kit exists for one fixture. If you're running the GL650W+ and need driver clearance, this is the only way to get it.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eWith the driver remotely mounted, the Growcast connects directly to it and automates scheduling and PPFD control from your phone.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eIf you're using a T Dimmer rather than the Growcast, it connects to the remotely mounted driver the same way — no additional cables required.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRemotely mounting the driver outside the tent reduces heat load inside the canopy — a meaningful benefit in a sealed environment at 650W.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline and Exhaust Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMoving the driver out of the tent pairs well with dialling in your exhaust — less heat source inside means more efficient ventilation.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-driver-extension-kit\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ Driver Extension Kit\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a GL1000W+ instead? The GL1000W+ has its own dedicated extension kit — not this one. Check the Treegers collection.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this kit work with the GL1000W+ or GL420W?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this kit is designed exclusively for the GL650W+. It uses Jnicon M19 connectors specific to the GL650W+ driver configuration and will not fit the GL1000W+, GL420W, or GL300W. The GL1000W+ has its own separate extension kit. The GL420W and GL300W have integrated drivers and do not support remote driver mounting.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need to install both cables, or can I just use the power cable?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eBoth cables must be installed together. The power cable extends the electrical supply between driver and fixture; the dimming cable extends the control signal. If you only extend the power connection and leave the stock dimming cable in place, the dimming cable becomes the limiting factor on how far the driver can be positioned. For a full 3-metre remote driver setup, both cables are required.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I chain two kits together to get 6 metres of distance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — 3 metres is the maximum rated distance for this kit. Chaining two kits is not supported by Treegers, is not covered under warranty, and may result in voltage drop on the power cable or signal degradation on the dimming connection. If your installation requires more than 3 metres of driver clearance, contact The Grow Guys to discuss alternatives before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhy would I want to mount the driver remotely?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe GL650W+ driver generates heat during operation. Mounting it outside the grow tent or away from the canopy keeps that heat source outside the growing environment, which reduces the total thermal load your exhaust system needs to manage. It also makes the driver more accessible for inspection and maintenance without disturbing the canopy or opening the tent. For tightly managed grow rooms at 650W, remote driver mounting is worth the $58 to get the heat out.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this kit affect dimming performance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the dimming extension cable is rated and tested for use at 3 metres without signal loss. Your T Dimmer, Growcast, or universal controller will communicate with the driver exactly as it would with the stock cabling. No recalibration or adjustment is needed after installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eGet Your Driver Out of the Tent.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eLess heat inside the canopy. More flexibility in your room layout. Two cables, 3 metres, done. Questions about your GL650W+ installation? The Grow Guys team is here.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt(51338813931818, 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51338813931818,"sku":"TRG-ACC-EXT-GL650","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-GL650W-Driver-Extension-Kit-3m-Power-and-Dimming-Cable-Set.webp?v=1774917921"},{"product_id":"treegers-gl1000w-plus-driver-extension-kit","title":"Treegers GL1000W+ Driver Extension Kit — 3m Power and Dimming Cable Set","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The GL1000W+ driver mounts remotely by design, and at 1000W there is a real payoff to getting it out of the growing environment. This kit gives you 3 metres of clearance between the driver and the fixture frame using three cables — two for the dual power inputs on the GL1000W+ driver, and one for the dimming connection — all without voltage drop or signal loss. It is the same build quality as the GL650W+ kit: IP67 rated, Jnicon M19 connectors, UL-certified. The only difference is the extra power cable the GL1000W+ needs.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3 Metres of Driver Clearance\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePosition the GL1000W+ driver up to 3 metres from the fixture bars — outside the tent, on a wall, or on an equipment rail — without power or signal loss.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eThree Cables — All Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTwo power extension cables for the GL1000W+'s dual power inputs, plus one dimming extension cable. Everything the driver needs to run remotely.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAll three cables carry IP67 protection — fully sealed against moisture and dust ingress for reliable operation in a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Voltage Drop\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRated at 300V\/600V and 20A\/10A respectively. Designed for the GL1000W+ driver load — the full 1000W supply carries cleanly across 3 metres.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eJnicon M19 Connectors\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking Jnicon connectors match the GL1000W+ driver and frame ports exactly. Push in, lock, no tools needed.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUL-certified under UL2238 E500203. Backed by Treegers' 2-year accessory warranty.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TDEK002\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188092\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GL1000W+ fixtures with Jnicon M19 3-pin connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Jnicon 53-100331-02 \/ 53-200311-02 (power); Jnicon 54-100331-02 \/ 54-200311-02 (dimming)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Power Cables:\u003c\/strong\u003e 300V \/ 20A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Dimming Cable:\u003c\/strong\u003e 600V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres each\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600g x2 (power cables); 200g (dimming cable)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL2238 E500203\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2x Driver Power Extension Cables — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connectors. Two cables required for the GL1000W+'s dual power input configuration.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Dimming Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Extends the dimming signal from the driver to the fixture without degradation.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGL1000W+ Only — This Kit Is Not Interchangeable With the GL650W+ Kit\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThis kit is designed exclusively for the GL1000W+ fixture. The GL1000W+ driver has two power inputs — this kit includes two power cables to match. The GL650W+ kit only includes one power cable and will not fully supply the GL1000W+ driver.\u003c\/li\u003e\n      \u003cli\u003eIf you are running a GL650W+, there is a separate GL650W+ Driver Extension Kit. Do not mix kits between fixture models.\u003c\/li\u003e\n      \u003cli\u003eAll three cables must be installed together. Running only the power extensions without replacing the dimming cable leaves the signal path limited to the shorter stock cable length.\u003c\/li\u003e\n      \u003cli\u003e3 metres is the maximum rated distance for this kit. Chaining two kits is not supported, not rated, and not covered under warranty.\u003c\/li\u003e\n      \u003cli\u003eThe GL420W and GL300W have integrated drivers and do not support remote driver mounting — this kit will not fit those fixtures.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Install the GL1000W+ Driver Extension Kit\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect from mains power and allow the fixture to cool\u003c\/strong\u003e — Never work on a live or recently operated fixture. Disconnect from power completely and wait for the driver and bars to cool before touching any cables or connections.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect both stock power cables from the driver\u003c\/strong\u003e — The GL1000W+ driver has two power input ports. Locate both stock power cables, twist the locking ring on each Jnicon connector to release, and pull both clear. Set them aside.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect both power extension cables in their place\u003c\/strong\u003e — Run the two 3-metre power extension cables from the driver's power input ports to their corresponding ports on the fixture frame. Push each Jnicon connector in firmly until it locks. Route cables cleanly without excessive tension or pinch points.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect and replace the dimming cable\u003c\/strong\u003e — Remove the stock dimming cable and connect the 3-metre dimming extension in its place. Run it alongside the power cables to the same remote driver position and lock both ends of the Jnicon connector.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the driver at the remote position\u003c\/strong\u003e — Secure the driver using the GL1000W+'s included driver support brackets on a tent wall, equipment rail, or adjacent structure at the desired location within the 3-metre cable run. Ensure there is airflow around the driver casing.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eReconnect mains power and verify operation\u003c\/strong\u003e — Power on and confirm the fixture illuminates at full output and responds correctly to your controller or dimmer. If the fixture does not respond to dimming commands, check both ends of the dimming extension cable first. If power output seems reduced, verify both power extension cables are fully locked at each end.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThis kit exists for this fixture only. Running the GL1000W+ in a space where the driver position matters? This is how you get the placement flexibility you need.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eWith the driver remotely mounted, the Growcast connects to it directly to automate scheduling and PPFD control without needing to access the grow space.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer connects directly to the remotely mounted driver via the LLT port — the extension cables do not affect dimmer compatibility.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline and Exhaust Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAt 1000W, moving the driver heat source outside the tent meaningfully reduces what your extraction system has to shift. Worth doing with proper ventilation.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePositioning the driver outside your tent keeps internal temperatures lower and makes the driver accessible for inspection without opening the canopy.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-gl650w-plus-driver-extension-kit\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ Driver Extension Kit\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a GL650W+ instead? Its dedicated kit includes one power cable and one dimming cable — not this one. Check the Treegers collection for the correct kit.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhy does this kit include two power cables when the GL650W+ kit only has one?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe GL1000W+ driver has two power input connections to handle the higher 1000W load — the same reason the GL1000W+ driver is physically larger than the GL650W+ driver. Each power input needs its own extension cable for remote mounting. The GL650W+ driver only has one power input, which is why its kit contains one power cable. Using the GL650W+ kit on a GL1000W+ would leave one power input unextended.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this kit work with the GL650W+ fixture?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this kit is designed for the GL1000W+ only. While the Jnicon M19 connector type is the same across Treegers GL+ fixtures, the GL1000W+ kit includes two power cables for the dual power input configuration of that specific driver. Using it on a GL650W+ is not supported. The GL650W+ has its own dedicated extension kit.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo all three cables need to be installed, or can I just use the power cables?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eAll three cables must be installed together. If you extend the two power connections but leave the original dimming cable in place, the dimming cable becomes the limiting factor on how far the driver can be positioned. For the full 3-metre remote driver setup, all three extensions are required.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I chain two kits to get 6 metres of distance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — 3 metres is the maximum rated distance for this kit. Chaining two kits is not supported by Treegers, is not covered under warranty, and risks voltage drop on the power cables at the combined length. If your installation genuinely requires more than 3 metres of driver clearance, contact The Grow Guys before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes remote driver mounting affect performance or dimming response?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — both the power and dimming cables are rated and tested for 3 metres without voltage drop or signal degradation. The GL1000W+ fixture will operate at the same output and dimming response as it would with the stock cable lengths. No recalibration is needed after installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhere should I mount the driver once it is remotely positioned?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUse the GL1000W+'s included driver support brackets to mount the driver on a tent wall, equipment rail, or adjacent structure. The driver should have clear airflow around it — do not mount it in an enclosed cabinet or against a surface that blocks all sides. Outside the tent is ideal. Ensure the mounting point is load-rated for the driver weight and that the cable runs are free of tension and pinch points.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eGet the 1000W Driver Out of the Tent.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThree cables, 3 metres, no heat compromise. Questions about your GL1000W+ installation or driver positioning? The Grow Guys team has you covered.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt(51338847519018, 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51338847519018,"sku":"TRG-ACC-EXT-GL1000","price":94.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-GL1000W-Driver-Extension-Kit-3m-Power-and-Dimming-Cable-Set.webp?v=1774917926"},{"product_id":"lumatek-digital-panel-plus-2-0-controller","title":"Lumatek Digital Panel PLUS 2.0 — Dual Signal HID + LED Lighting Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The Lumatek Digital Panel PLUS 2.0 is a dual-signal lighting controller that runs both HID ballasts and LED drivers from a single unit. Two independent zones, 400 HID ballasts or 100 LED drivers total, 1% dimming precision, temperature safety automation, and Sunrise\/Sunset simulation — all from a box the size of a paperback. If you are running any Lumatek controllable fixture and still using a basic timer, this is the upgrade that actually matters.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eDual Signal — HID + LED\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRS485 digital for HID, 0-10V analogue for LED. Run both simultaneously from two independent zones on one controller.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTemperature Safety Automation\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eIncluded temp sensors trigger automatic dimming or switch-off if your room hits preset thresholds. Fixtures protect themselves.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1% Dimming Precision\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDial in exact light intensity across the full 10%–115% power range. Automate PPFD targets by growth stage without touching the fixtures.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSunrise and Sunset Modes\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eGradual light transitions up to 30 minutes. Reduces plant stress at light-on and light-off — a genuine agronomic benefit, not a gimmick.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003cbr\u003eLUMM0019\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003cbr\u003eAdaptor 100–240V AC, 50\/60Hz — DC 5V\/2A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatible HID Ballasts\u003c\/strong\u003e\u003cbr\u003e315W, 600W, 630W, 1000W\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatible LED Drivers\u003c\/strong\u003e\u003cbr\u003eAll Lumatek Controllable LED Drivers\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSignal Protocol — HID\u003c\/strong\u003e\u003cbr\u003eRS485 Digital\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSignal Protocol — LED\u003c\/strong\u003e\u003cbr\u003e0-10V Analogue\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eZones\u003c\/strong\u003e\u003cbr\u003e2 (Zone A + Zone B), independently configurable\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eMax Devices per Zone — HID\u003c\/strong\u003e\u003cbr\u003e200 ballasts (RS485)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eMax Devices per Zone — LED\u003c\/strong\u003e\u003cbr\u003e50 drivers (0-10V)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eTotal Capacity\u003c\/strong\u003e\u003cbr\u003e400 HID ballasts or 100 LED drivers\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Range\u003c\/strong\u003e\u003cbr\u003e10% – 115%\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Accuracy\u003c\/strong\u003e\u003cbr\u003e1% increments\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSafety Dimming Range\u003c\/strong\u003e\u003cbr\u003e0°C – 40°C\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSafety Switching Range\u003c\/strong\u003e\u003cbr\u003e10°C – 50°C\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSunrise \/ Sunset Duration\u003c\/strong\u003e\u003cbr\u003e0 – 30 minutes\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e125 x 80 x 25 mm\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e1x Lumatek Digital Panel Plus 2.0\u003c\/div\u003e\n    \u003cdiv\u003e1x Power Adaptor and Cable\u003c\/div\u003e\n    \u003cdiv\u003e2x Temperature Sensor Cable (5m each)\u003c\/div\u003e\n    \u003cdiv\u003e2x HID Control Link Cable (5m each)\u003c\/div\u003e\n    \u003cdiv\u003e2x LED Control Link Cable\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Amber Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eTGG Grower Tips\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eZone A and Zone B are completely independent. You can run your veg room on Zone A and your flower room on Zone B with different schedules, dimming levels, and wattages — on one controller.\u003c\/li\u003e\n      \u003cli\u003eEach zone can only control the same type and wattage of ballasts or drivers. If you are mixing wattages, split them across zones accordingly.\u003c\/li\u003e\n      \u003cli\u003eThe temperature sensors are your safety net — install them at canopy level, not high on the wall. Where the plant is, is where the temperature reading matters.\u003c\/li\u003e\n      \u003cli\u003eSunrise\/Sunset mode does more than reduce stress. A gradual ramp-up gives your fans and environmental controls time to respond before full light load hits the room.\u003c\/li\u003e\n      \u003cli\u003eThe dimming range goes to 115%. This allows you to run Lumatek HID ballasts above their rated wattage on supported models — only do this if your ballast spec sheet explicitly lists it as a supported mode.\u003c\/li\u003e\n      \u003cli\u003eThis controller is Lumatek-ecosystem specific. It will not reliably control non-Lumatek fixtures via RS485. The 0-10V LED channel is more universal — check your LED driver's compatibility before assuming it will work.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Zone Setup Explained --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow the Two-Zone System Works\u003c\/h2\u003e\n  \u003cp style=\"font-size: 0.95rem; line-height: 1.7; margin-bottom: 2rem;\"\u003e\n    Zone A and Zone B each operate on their own signal, schedule, and dimming program — they do not talk to each other. Each zone can control up to 200 HID ballasts via RS485 or up to 50 LED drivers via 0-10V, giving you up to 400 HID or 100 LED devices from one controller. You can use the two zones to manage two separate rooms on different light cycles, or run them in the same room with two different fixture types — for example, Zone A managing LED bars at 600W and Zone B handling HID ballasts at 315W. The one rule is that each zone must only control identical-wattage devices. Mix wattages and the RS485 daisy chain breaks down. Keep it clean: same wattage per zone, different wattages split across zones.\n  \u003c\/p\u003e\n\n  \u003c!-- How to Set Up --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSetting Up Your Digital Panel PLUS 2.0\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the controller\u003c\/strong\u003e on a wall or vertical surface outside your grow space, in a position where you can read the display and reach it without entering the room. The included power adaptor runs on 100–240V AC — plug it into a standard Australian outlet.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eRun the control link cables\u003c\/strong\u003e from the controller to your fixtures. For HID, use the HID control link cables (5m included) in a daisy-chain from Zone A or Zone B to your ballasts in sequence. For LED, connect the LED control link cables to your drivers via the 0-10V port. Additional daisy-chain cables are available separately if your room requires longer runs.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eInstall the temperature sensors\u003c\/strong\u003e (two included, 5m cables each). Position one sensor per zone at canopy height — this is the temperature that matters for your plants and for the safety dimming to respond correctly. Secure the sensor cable so it does not contact hot fixture surfaces or get waterlogged.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eProgram your light schedule\u003c\/strong\u003e through the controller menu. Set your on\/off times for each zone independently. Configure your Sunrise and Sunset duration (0–30 minutes), set your target dimming level for each growth stage, and configure temperature thresholds for safety dimming and switch-off.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eTest each zone\u003c\/strong\u003e before leaving the system to run unattended. Manually trigger a dim-up and dim-down through the controller menu, confirm the correct fixtures respond, and verify the temperature sensor readings are within expected range. Check that both zones respond independently if running dual rooms.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSet your safety thresholds and walk away.\u003c\/strong\u003e The controller monitors temperature continuously and will automatically dim or kill power to your fixtures if your room overheats. This is not a feature you set once and forget — revisit it at the start of each season when ambient temperatures change significantly.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/lumatek-ats300w-pro-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eLumatek ATS300W PRO\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe ATS300W PRO connects directly to the 0-10V LED channel. One controller can run up to 50 of these fixtures per zone.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/zeus-600w-pro-3-1-led-grow-light-by-lumatek\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eLumatek Zeus 600W PRO\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe Digital Panel PLUS 2.0 is the native controller for the Zeus range. Timing, dimming, and Sunrise\/Sunset all managed from one unit.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/lumatek\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eLumatek HID Ballasts\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eCompatible with Lumatek controllable HID ballasts at 315W, 600W, 630W, and 1000W via RS485 daisy-chain on Zone A or Zone B.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning two-zone control works particularly well across two tents — veg in one, flower in another, both managed from the same controller.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control both HID and LED lights at the same time?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — that is the entire point of the dual-signal design. Put your HID ballasts on one zone using the RS485 digital signal and your LED drivers on the other zone using the 0-10V analogue signal. Each zone runs its own independent schedule and dimming program. You cannot mix HID and LED on the same zone.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with non-Lumatek fixtures?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eFor HID via RS485, no — this protocol is proprietary to Lumatek and the Digital Panel PLUS 2.0 will not reliably control other brands via that channel. For LED via 0-10V, it is more likely to work with non-Lumatek drivers that accept a standard 0-10V dimming signal, but Lumatek does not guarantee compatibility outside their own range. Test before relying on it in a production environment.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many fixtures can one controller run?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUp to 400 HID ballasts total (200 per zone via RS485), or up to 100 LED drivers total (50 per zone via 0-10V). You can mix both types across the two zones — for example, 200 HID on Zone A and 50 LED on Zone B simultaneously. These are the maximum limits per the manufacturer spec.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I run two different wattages of ballast on the same controller?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — but not on the same zone. Each zone must control identical-wattage devices only. If you need to run 600W and 315W HID ballasts in the same room, put the 600W ballasts on Zone A and the 315W ballasts on Zone B. The two zones can then run independently with different power levels and schedules.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat does the temperature safety system actually do?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eTwo things, at two different temperature thresholds. Between 0°C and 40°C, if your room temperature rises the controller automatically dims the lights down to reduce heat load. If the temperature hits your configured switching threshold (between 10°C and 50°C), the controller shuts the lights off completely. Both thresholds are configurable. The fixtures come back on once the temperature drops back within range. This protects your crop and your gear when your cooling fails or your room heats up unexpectedly.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need additional cables beyond what is included?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003ePossibly — it depends on your room size and fixture count. The box includes two HID control link cables (5m each) and two LED control link cables, which is enough to get a standard small room connected. For larger rooms with many fixtures in a daisy-chain, you will need additional Lumatek daisy-chain cables, sold separately. Measure your runs before ordering to avoid running short.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs Sunrise\/Sunset mode just a gimmick?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — there is genuine agronomic reason to use it. Abrupt light-on events create a sharp thermal and photosynthetic shock to plants, particularly at high light intensities. A gradual ramp from 0% to full power over 15–30 minutes mirrors natural dawn conditions and is associated with reduced plant stress and more consistent stomatal behaviour. It also gives your environmental controls — fans, AC, CO2 — time to respond to rising light load before the room is at full intensity.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eTake Control of Your Lumatek Setup\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eTwo zones, 400 fixtures, 1% precision. In stock and shipping Australia-wide from TGG. Not sure if this works with your setup? Ask us.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/lumatek\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Lumatek\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('51379141542186', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#388e3c';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#4caf50';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#4caf50';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"Lumatek","offers":[{"title":"Default Title","offer_id":51379141542186,"sku":"LUM-CTRL-PANEL-PLUS2","price":699.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Lumatek-Digital-Panel-PLUS-2_0-Dual-Signal-HID-LED-Lighting-Controller.webp?v=1776901734"},{"product_id":"headwind-hvc-smart-ec-fan-controller-pro","title":"Headwind HVC Smart EC Fan Controller PRO — Auto Temp \u0026 Humidity Ventilation Control","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The Headwind HVC Smart EC Fan Controller PRO puts your grow room ventilation on autopilot. Connect up to four HVC EC fans, dial in your temperature and humidity setpoints, and let the controller do the work — automatically adjusting fan speed to keep conditions exactly where you need them. Four operating modes, an integrated sensor probe, smart fault detection, and a clean digital display. One unit. Full control.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAuto Climate Control\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAdjusts EC fan speed in real time based on your temperature and humidity setpoints — no manual intervention needed.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eControls Up to 4 Fans\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRun up to four Headwind HVC EC fans from one controller — built for larger grow spaces and multi-zone rooms.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eFour Operating Modes\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAuto, Manual, Day\/Night, and Alarm modes give you the flexibility to run your environment your way, around the clock.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Separate Power Required\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe controller draws power directly from your connected HVC EC fans — no extra cables, adapters, or power points needed.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eFan Connections\u003c\/strong\u003e\u003cbr\u003eUp to 4 Headwind HVC EC fans\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eControl Signal\u003c\/strong\u003e\u003cbr\u003e0–10V\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eOperating Modes\u003c\/strong\u003e\u003cbr\u003eAuto, Manual, Day\/Night, Alarm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIntegrated Sensor\u003c\/strong\u003e\u003cbr\u003eTemperature and humidity probe\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSpeed Control\u003c\/strong\u003e\u003cbr\u003eVariable min\/max — user-configurable\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eFault Detection\u003c\/strong\u003e\u003cbr\u003ePer-fan error monitoring and alarm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003cbr\u003eDigital — live temp, humidity, fan status\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003cbr\u003eDrawn from connected HVC EC fans\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003eHeadwind HVC EC fans only\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003ePlug-and-play — minimal wiring\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"display: block; margin-bottom: 0.5rem; color: #2e5e2e;\"\u003eNot Sure What Size You Need?\u003c\/strong\u003e\n    \u003cp style=\"margin: 0 0 0.8rem; font-size: 0.93rem; line-height: 1.6;\"\u003eEnter your tent dimensions and get a matched fan size in seconds.\u003c\/p\u003e\n    \u003ca href=\"\/pages\/fan-size-calculator\" style=\"display: inline-block; background: #2e5e2e; color: #fff; padding: 0.6rem 1.4rem; border-radius: 6px; font-size: 0.95rem; font-weight: 700; text-decoration: none;\"\u003eFan Size Calculator\u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrower Tips\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eSet your minimum fan speed to 20–30% to maintain continuous fresh air exchange — never let it drop to zero.\u003c\/li\u003e\n      \u003cli\u003eUse Day\/Night mode to reduce fan speed during dark periods — quieter overnight and easier on your power bill.\u003c\/li\u003e\n      \u003cli\u003eMount the sensor probe at canopy level for accurate temperature and humidity readings where it actually matters.\u003c\/li\u003e\n      \u003cli\u003eRevisit your setpoints at each growth stage — a flowering room runs warmer and drier than a propagation space.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How-To --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set Up the HVC Smart EC Fan Controller PRO\u003c\/h2\u003e\n\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n    \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnect your HVC EC fans\u003c\/strong\u003e — Plug your Headwind HVC EC fans into the controller ports using the supplied cables. No separate power adapter is required — the controller draws power directly from the fans.\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n    \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003ePosition the sensor probe\u003c\/strong\u003e — Mount the integrated probe at canopy level inside your grow space. Accurate placement gives you accurate control.\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n    \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSelect your operating mode\u003c\/strong\u003e — Navigate to Auto Mode via the button interface. For hands-on control, use Manual Mode to set a fixed fan speed directly.\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n    \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProgram your setpoints\u003c\/strong\u003e — Enter target temperature and humidity values, then set minimum and maximum fan speed limits to define the operating range.\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n    \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eMonitor and confirm\u003c\/strong\u003e — Check the digital display for live temperature, humidity, and fan status readings. Adjust setpoints as needed until your environment is dialled in.\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem; margin-top: 2rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline EC Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe HVC Controller is built exclusively for Headwind HVC EC fans — this is the pairing it was designed for.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/odour-control-carbon-filters\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eCarbon Filters\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eControlled fan speed means controlled airflow through your carbon filter — essential for consistent odour management.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/environmental-monitors\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironmental Monitors\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAdd a standalone monitor to cross-check VPD and conditions independently of your controller's onboard probe.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAutomated climate control works best in a properly sealed tent where airflow can be precisely managed end to end.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this controller work with non-Headwind fans?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The HVC Smart EC Fan Controller PRO is designed exclusively for Headwind HVC EC fans. It draws power from and communicates directly with those fans — it will not function correctly with other brands.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan it respond to temperature and humidity at the same time?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. In Auto Mode the controller reads both temperature and humidity simultaneously from the integrated probe and adjusts fan speed to keep conditions within your setpoints — whichever trigger is reached first drives the response.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many fans can I connect?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUp to four Headwind HVC EC fans can be connected and controlled simultaneously from a single HVC Smart EC Fan Controller PRO.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it need a separate power supply?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. The controller is powered directly through the connected Headwind HVC EC fans — no external power cord or adapter is required. Setup is minimal.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill I know if a connected fan develops a fault?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The controller monitors each connected fan individually. If a fan stops working or behaves abnormally, it will trigger an alarm alert so you can act before your environment is affected.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eReady to Automate Your Ventilation?\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eFree shipping over $499* | 14 years of growing expertise behind every order\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/environment-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eView All Controllers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cscript\u003e\n  document.addEventListener('DOMContentLoaded', function() {\n    var btn = document.getElementById('btn-add-to-cart');\n    if (!btn) return;\n    btn.addEventListener('click', function() {\n      fetch('\/cart\/add.js', {\n        method: 'POST',\n        headers: {'Content-Type': 'application\/json'},\n        body: JSON.stringify({id: parseInt('51423787909418', 10), quantity: 1})\n      }).then(function(response) {\n        return response.json();\n      }).then(function(data) {\n        if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n        btn.textContent = 'Added to Cart';\n        btn.style.background = '#2e5e2e';\n        setTimeout(function() {\n          btn.textContent = 'Add to Cart';\n          btn.style.background = '#b67317';\n        }, 2000);\n      }).catch(function() {\n        btn.textContent = 'Error — Try Again';\n        btn.style.background = '#c0392b';\n        setTimeout(function() {\n          btn.textContent = 'Add to Cart';\n          btn.style.background = '#b67317';\n        }, 2500);\n      });\n    });\n  });\n  \u003c\/script\u003e\n\n\u003c\/div\u003e","brand":"Headwind HVC","offers":[{"title":"Default Title","offer_id":51423787909418,"sku":"HW-EC-CTRL-PRO","price":185.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Headwind-HVC-Smart-EC-Fan-Controller-PRO-Auto-Temp-Humidity-Ventilation-Control.jpg?v=1776901868"},{"product_id":"digi-lumen-extreme-led-controller","title":"Digi-Lumen Extreme LED Controller — Programmable 50-Fixture Master Controller with Digital Timer","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe Digi-Lumen Extreme LED Controller is a compact master controller for grow rooms running multiple 0–10V LED fixtures. Daisy-chain up to 50 lights through dual RJ12 ports, run them on a programmable on\/off schedule via the built-in digital clock, and dim smoothly from 10% to 100% — all from one panel. Plug-and-play setup, clear digital display, and a full master reset if you need to start fresh. Made for growers scaling past one or two lights who want one source of truth for the whole room. Free shipping over $499*.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eUp to 50 Fixtures, One Panel\u003c\/strong\u003e\n\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDaisy-chain compatible 0–10V LEDs through dual RJ12 ports and run the whole room from one controller — no per-fixture timers, no clashing schedules.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eProgrammable Timer + Built-In Clock\u003c\/strong\u003e\n\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet on and off times directly on the unit. The internal clock keeps your photoperiod accurate without relying on an external timer or smart plug.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSmooth 10% to 100% Dimming\u003c\/strong\u003e\n\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWider dimming range than entry-level controllers. Useful for seedlings and clones at the low end, and full bloom intensity at the top.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug-and-Play Setup\u003c\/strong\u003e\n\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eStandard 0–10V signal over RJ12. If your LED driver has a 0–10V dimming port, it speaks the same language. No firmware, no app, no Wi-Fi headaches.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eClear Digital Display + Master Reset\u003c\/strong\u003e\n\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003e7-segment readout shows clock, timer, and dimming state at a glance. Master reset returns the unit to defaults if you need to reprogram from scratch.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMax fixtures:\u003c\/strong\u003e Up to 50 (daisy-chained)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eControl protocol:\u003c\/strong\u003e 0–10V analogue\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDimming range:\u003c\/strong\u003e 10% – 100%\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMax output current:\u003c\/strong\u003e 80 A\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e Digital 7-segment LED\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e Dual RJ12 (daisy-chain)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTimer:\u003c\/strong\u003e Programmable on\/off with built-in clock\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eReset:\u003c\/strong\u003e Full master reset\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP20 (indoor use)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Any 0–10V dimmable LED driver\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n\u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrower Tip — Keep the Signal Clean\u003c\/strong\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eMount the controller outside the immediate canopy on a dry wall or tent strut — IP20 means indoor and dry only.\u003c\/li\u003e\n\u003cli\u003eRun RJ12 cables away from mains power runs where you can. Parallel mains and signal cables can introduce flicker or dimming noise on long chains.\u003c\/li\u003e\n\u003cli\u003eIf you're running near the 50-fixture cap, check total signal current draw against the 80A spec — most LED drivers pull a few mA on the 0–10V line, but huge chains add up.\u003c\/li\u003e\n\u003cli\u003eThe clock holds time while powered. If you lose mains for an extended period, expect to reset the clock on power-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set It Up\u003c\/h2\u003e\n\n\u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n\u003cdiv\u003eMount the controller on a dry wall, tent pole, or shelf within reach of mains power and your first LED fixture. Keep it out of direct light and water spray.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n\u003cdiv\u003eRun an RJ12 cable from one of the EXT ports on the controller into the 0–10V dimming port on your first LED fixture's driver, then daisy-chain from that fixture to the next using the second port.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n\u003cdiv\u003ePower the controller. Use the CLOCK button to set the current time — this is the reference point for every timer event from now on.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n\u003cdiv\u003ePress TIMER, then use + and − to set the lights-on and lights-off times for your photoperiod. The display confirms the schedule on the readout.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n\u003cdiv\u003ePress DIMMING and use + \/ − to set your output level from 10% to 100%. Hit ON\/OFF to take the system live — every chained fixture will track the controller.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n\u003ca href=\"\/collections\/digi-lumen\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eDigi-Lumen LED Range\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eHalo and Extreme LED fixtures designed to work with this controller out of the box.\u003c\/p\u003e\n\u003c\/a\u003e\n\n\u003ca href=\"\/collections\/led-grow-lights\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAll 0–10V LED Grow Lights\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAny LED with a 0–10V dimming port will daisy-chain off this controller.\u003c\/p\u003e\n\u003c\/a\u003e\n\n\u003ca href=\"\/collections\/environmental-monitors\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironmental Monitors\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eTrack temp, humidity, and VPD alongside your lighting schedule for full room awareness.\u003c\/p\u003e\n\u003c\/a\u003e\n\n\u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMatch the controller to the right footprint — single-tent through multi-room setups.\u003c\/p\u003e\n\u003c\/a\u003e\n\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with LEDs that aren't Digi-Lumen?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — any LED grow light with a 0–10V dimming port and an RJ12 (or compatible RJ) input will work. The 0–10V protocol is the industry standard for horticultural LED dimming, and brands including Lumatek, Hi-Par, Photontek, and most other modern bar lights use it. Check your fixture's driver spec sheet if you're unsure.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many fixtures can it actually run?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUp to 50 fixtures daisy-chained through the dual RJ12 ports, with an 80A signal current ceiling. For most home and small commercial rooms running 1–12 lights, you'll be nowhere near the cap. If you're scaling a multi-room facility, plan your chain layout so the signal cable runs stay tidy.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I use it with HID lamps?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this is a 0–10V controller built for LED drivers. HPS and MH lamps run on different ballast control protocols and won't accept the signal. If you're on HID, you'll want a dedicated HID controller instead.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it have sunrise\/sunset ramping?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Extreme Controller handles on\/off scheduling with manual dimming level setting, not automated sunrise\/sunset ramps. If gradual ramping is a priority, look at the Digi-Lumen ECO Smart Controller or the touchscreen tier instead.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs it weatherproof or for outdoor use?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — it's IP20, which means it's protected against finger-sized objects but not against water. Mount it indoors, in a dry spot, away from direct light spray or drip points. The fixtures themselves can be higher-rated; the controller stays inside.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat's in the box?\u003c\/summary\u003e\n\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe controller unit itself, with mains power lead. RJ12 daisy-chain cables are typically supplied with your LED fixtures; if you need additional or longer runs, standard 6P6C RJ12 cables work — grab spares from any electronics supplier.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eOne Controller. The Whole Room.\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eStop juggling timers and per-fixture dimmers. Run up to 50 LEDs on one schedule.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/environment-controllers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eBrowse All Controllers\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('51557351948586', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e\n\n\u003c\/div\u003e","brand":"Digi-Lumen","offers":[{"title":"Default Title","offer_id":51557351948586,"sku":"DL-CTRL-EXTREME-50FIX","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Digi-Lumen-Extreme-LED-Controller-Programmable-50-Fixture-Master-Controller-with-Digital-Timer.jpg?v=1779606469"},{"product_id":"digi-lumen-enviro-pro-controller","title":"Enviro-Pro Environmental Controller by Digi-Lumen — Temp, Humidity, CO₂ \u0026 VPD with 4-Channel Dimming","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eThe Digi-Lumen Enviro-Pro is an all-in-one environmental controller that runs your whole room from a single 5-inch touchscreen. It reads temperature, humidity, CO₂, VPD and light in real time through the included 4-in-1 sensor, then coordinates heating, cooling, humidity, CO₂ and up to four lighting zones to hold your targets steady. Ethernet and app control add remote monitoring and alarms, so you can dial in a tent or a small commercial room and leave it to run.\u003c\/p\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n  \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n    \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eReal-Time 4-in-1 Monitoring\u003c\/strong\u003e\n    \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe included BLS-4 sensor reads temperature, humidity, CO₂ and light. VPD, EC, pH and water temperature are covered too, with optional add-on modules.\u003c\/span\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n    \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e4-Channel 0–10V Dimming\u003c\/strong\u003e\n    \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eControl up to four lighting zones independently in Manual, Auto Timer or Auto Cycle mode — plus PAR-based auto-dimming when a PAR sensor is connected.\u003c\/span\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n    \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e4-Port Device Automation\u003c\/strong\u003e\n    \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAssign each 240V port to heating, cooling, humidify, dehumidify or CO₂. Sunrise\/sunset scheduling, fuzzy-logic CO₂ and smart locks keep it stable.\u003c\/span\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n    \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTouchscreen + App Control\u003c\/strong\u003e\n    \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eA 5-inch 800×480 display makes setup clear, and the built-in Ethernet port binds to the Digi-Lumen app for remote monitoring, control and alarms.\u003c\/span\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n  \u003cdiv\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e5\" LCD, 800 × 480\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eMonitors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eTemp, humidity, CO₂, VPD, light (EC\/pH\/water temp with modules)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eLight Control\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e4 × 0–10V (30mA per channel)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eDevice Ports\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e4 × 240V (8A per port)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eAC 100–240V, 50\/60Hz\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eMax Input Current\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e10A\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eSensor Port\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRJ12 (RS485, 12V \/ 0.5A)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eNetwork\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRJ45 Ethernet (DHCP or manual IP)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eCommunication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eRS485 (9600 baud, 8N1)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e0–50°C\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eIP20 (indoor use)\u003c\/div\u003e\n  \u003cdiv\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eEnviro-Pro, BLS-4 sensor, 5m RJ12 cable, splitter, mount kit\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n  \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGetting accurate control\u003c\/strong\u003e\n  \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n    \u003cli\u003eMount the 4-in-1 sensor at canopy height and keep it out of direct light from the fixtures — direct light skews the temperature and photocell readings.\u003c\/li\u003e\n    \u003cli\u003eSet your targets by VPD rather than humidity alone, and let the controller coordinate humidify and dehumidify to hold the zone steady.\u003c\/li\u003e\n    \u003cli\u003eUse the smart locks (cooling and dehumidify, CO₂ and cooling, CO₂ and dehumidify) so devices do not fight each other and waste power.\u003c\/li\u003e\n    \u003cli\u003eCO₂ dosing pauses automatically in the dark, so there is no need to schedule around lights-off.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eGetting Set Up\u003c\/h2\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n  \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n  \u003cdiv\u003eMount the controller with the wall screws, or the U-bolt on your tent frame.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n  \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n  \u003cdiv\u003eConnect the BLS-4 4-in-1 sensor via the 5m RJ12 cable, placing it at canopy height and out of direct light.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n  \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n  \u003cdiv\u003eAssign each of the four 240V ports to a device — heater, cooler, humidifier, dehumidifier, or CO₂ gear.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n  \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n  \u003cdiv\u003eWire your 0–10V lights to the four dimming channels and choose Manual, Auto Timer, or Auto Cycle.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n  \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n  \u003cdiv\u003eBind the controller to the Digi-Lumen app by QR code over Ethernet for remote monitoring and alarms.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem; margin-top: 2rem;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n  \u003ca href=\"\/collections\/digi-lumen\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n    \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eThe Digi-Lumen Range\u003c\/strong\u003e\n    \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe Enviro-Pro dims the whole Digi-Lumen Extreme LED range over 0–10V — pair it with the fixtures it was built to run.\u003c\/p\u003e\n  \u003c\/a\u003e\n  \u003ca href=\"\/collections\/environmental-monitors\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n    \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironmental Monitors\u003c\/strong\u003e\n    \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAdd standalone monitors to cross-check readings or watch a second zone alongside the controller.\u003c\/p\u003e\n  \u003c\/a\u003e\n  \u003ca href=\"\/collections\/grow-lighting\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n    \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Lighting\u003c\/strong\u003e\n    \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAny 0–10V dimmable fixture wires into the four channels — browse the full lighting range to fill your zones.\u003c\/p\u003e\n  \u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFAQ\u003c\/h2\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n  \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat does it monitor?\u003c\/summary\u003e\n  \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eTemperature, humidity, CO₂, VPD and light out of the box via the 4-in-1 sensor, plus EC, pH and water temperature with the optional ECPH module.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n  \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many devices can it control?\u003c\/summary\u003e\n  \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eFour 240V device ports — heat, cool, humidify, dehumidify, or CO₂ up\/down — plus four independent 0–10V lighting channels.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n  \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control it remotely?\u003c\/summary\u003e\n  \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. It has a built-in Ethernet port and binds to the Digi-Lumen mobile app by QR code for remote monitoring and control.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n  \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it work with non-Digi-Lumen lights?\u003c\/summary\u003e\n  \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. The four dimming channels use standard 0–10V, so any 0–10V dimmable fixture will work.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n  \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs it waterproof?\u003c\/summary\u003e\n  \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It is IP20, rated for indoor use only — keep it dry and mounted away from direct water contact.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n  \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eTotal Control of Your Grow Environment\u003c\/h2\u003e\n  \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eTemperature, humidity, CO₂, VPD and lighting from one touchscreen. Free shipping over $499*.\u003c\/p\u003e\n  \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n    \u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n    \u003ca href=\"\/collections\/digi-lumen\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eView the Digi-Lumen Range\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('52072958656810', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e\n\n\u003c\/div\u003e","brand":"Digi-Lumen","offers":[{"title":"Default Title","offer_id":52072958656810,"sku":"DL-ENV-CONTROLLER-PRO","price":999.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Enviro-Pro-Environmental-Controller-by-Digi-Lumen-Temp-Humidity-CO2-VPD-with-4-Channel-Dimming.jpg?v=1787635648"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/collections\/bfb1a156-5b41-462b-8003-cfcc9fe08c5f.jpg?v=1785206635","url":"https:\/\/www.thegrowguys.com.au\/collections\/environment-controllers.oembed?page=2","provider":"The Grow Guys","version":"1.0","type":"link"}