{"title":"Light Controllers \/ Cables","description":"","products":[{"product_id":"treegers-precise-t-dimmer","title":"Treegers Precise T Dimmer — 0–10V LED Grow Light Dimmer Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    Your Treegers LED fixture ships without a dimmer — and without one, it runs at full power only. The Precise T Dimmer fixes that with a tactile T-knob that steps from 0% to 100% in clean 10% increments, a 3-metre cable that gives you real placement flexibility, and the grunt to control up to 50 fixtures from a single unit without voltage drops. No apps, no pairing, no configuration. Plug it in, turn the knob, done.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e10% Step Dimming\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEleven precise settings from off to full output. Dial in the right intensity for seedlings, veg, and flower without guesswork.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eControls Up to 50 Fixtures\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eOne dimmer runs up to 50 linked Treegers fixtures at consistent output — no voltage drop across the chain.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3-Metre Cable\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEnough reach to mount the control knob outside your tent or on a nearby wall where you can actually get to it.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Cable and Connector\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe cable and connector are IP67 rated. Built for the humid, wet reality of a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug-and-Play Simple\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eNo app, no pairing, no config. Connects directly to all Treegers LED fixtures via LLT-M12 self-locking connector.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eMounting Plate Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eComes with a mounting plate and 3M tape so you can fix the dimmer box neatly to a tent pole or wall panel.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TPTD001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188078\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Range:\u003c\/strong\u003e 0% – 10% – 20% – 30% – 40% – 50% – 60% – 70% – 80% – 90% – 100%\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eControl Protocol:\u003c\/strong\u003e 0–10V\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eFixture Capacity:\u003c\/strong\u003e 20–50 fixtures\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e LLT-M12-3 core male (self-locking elbow)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current:\u003c\/strong\u003e DC12V \/ 150mA\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimmer Box IP Rating:\u003c\/strong\u003e IP20\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable \/ Connector IP Rating:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 82 x 50 x 38.4mm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 201g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e IEC60669\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Precise T Dimmer\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eIncludes 3-metre cable and LLT-M12 self-locking connector — ready to plug straight into your Treegers fixture.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Mounting Plate\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWith 3M adhesive tape for a clean, fixed mount on tent poles, walls, or equipment racks.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eT Dimmer or Growcast — Which One Do You Need?\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThe Precise T Dimmer is for growers who want simple, reliable manual control — turn the knob, set the level, walk away.\u003c\/li\u003e\n      \u003cli\u003eThe Growcast is for growers who want full automation — programmed sunrise\/sunset ramps, app control, and multi-room scheduling.\u003c\/li\u003e\n      \u003cli\u003eFor a single tent with no automation needs, the T Dimmer is everything you need and nothing you don't.\u003c\/li\u003e\n      \u003cli\u003eBoth use the same 0–10V connector, so you can upgrade to the Growcast later without changing any fixture wiring.\u003c\/li\u003e\n      \u003cli\u003eNot sure? Hit up The Grow Guys and we'll help you figure out the right controller for your setup.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set Up the Precise T Dimmer\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off your fixture before connecting\u003c\/strong\u003e — Always connect the dimmer before switching power on. This protects the control circuitry and ensures a clean startup at the correct intensity setting.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect to your fixture's control port\u003c\/strong\u003e — The LLT-M12 self-locking connector clicks into the matching control port on your Treegers fixture. Push until it locks. No tools needed.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the dimmer box within reach\u003c\/strong\u003e — Use the included mounting plate and 3M tape to fix the unit on the outside of your tent or on a nearby surface. The 3-metre cable gives you good flexibility for positioning.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSet intensity to match your growth stage\u003c\/strong\u003e — Start seedlings and clones at 30–50%. Ramp veg up to 60–80% as the canopy develops. Push to 90–100% in peak flower once your plants have proven they can handle the load.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eLink multiple fixtures with Fixture Link Cables\u003c\/strong\u003e — To control more than one fixture from the same dimmer, connect them in series using Treegers Fixture Link Cables (sold separately). One T Dimmer can handle up to 50 fixtures with no voltage drop across the chain.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer is the most affordable way to unlock the full 0–100% dimming range on the GL420W. Plug in, dial in.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a bigger room? The T Dimmer handles the GL650W+ with the same plug-and-play connection.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePrefer manual control over a smart controller? The T Dimmer connects directly to the GL1000W+ via the same LLT port.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-fixture-link-cable\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Fixture Link Cable\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eDaisy-chain multiple Treegers fixtures to a single T Dimmer. One cable per additional fixture in the chain.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eReady to go further? The Growcast adds app control, automated schedules, and sunrise\/sunset ramping — same connector, straight swap.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer mounts cleanly to any tent frame with the included plate. A natural fit for a complete tent build.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the Precise T Dimmer compatible with all Treegers fixtures?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Precise T Dimmer works with all current Treegers LED fixtures including the GL300W, GL420W, GL650W+, and GL1000W+. It also works with any other 0–10V device using matching waterproof joint wiring.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control multiple fixtures from one T Dimmer?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — one Precise T Dimmer can control between 20 and 50 Treegers LED fixtures at full precision with no voltage drop. Use Treegers Fixture Link Cables (sold separately) to connect fixtures in series from the dimmer.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat is the difference between the T Dimmer and the Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe T Dimmer is a manual dial controller — you set the intensity by hand and it stays there until you change it. The Growcast is a smart controller with app connectivity, automated scheduling, sunrise\/sunset ramping, and multi-room capability. Both use the same 0–10V connection, so you can start with the T Dimmer and upgrade to the Growcast later without touching your fixture wiring.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat happens if I run a Treegers fixture without a dimmer connected?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eWithout a controller connected, Treegers fixtures run at 100% output. That is fine for established plants in flower but too intense for seedlings, clones, or early veg. Connecting the T Dimmer lets you throttle back and protect young plants while they establish.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the dimmer waterproof?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003ePartially — the cable and connector are rated IP67, meaning they are fully protected against water ingress in grow room conditions. The dimmer box itself is rated IP20, so keep it outside the tent or away from direct water exposure. The included mounting plate makes it easy to fix the unit on the exterior of your tent.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the T Dimmer work with non-Treegers LED lights?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, it can — provided the fixture uses matching waterproof joint wiring and accepts a standard 0–10V control signal. Not all LED brands use the same connector standard, so check your fixture's control port before purchasing. Contact The Grow Guys if you need help confirming compatibility.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eSimple Control. Zero Fuss.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Precise T Dimmer is the fastest, most affordable way to unlock proper intensity control on your Treegers setup. Questions about compatibility or which controller suits your grow? The Grow Guys team is here to help.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51304964522282', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51304964522282,"sku":"TRG-ACC-DIM-0-10V","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-Precise-T-Dimmer-0-10V-LED-Grow-Light-Dimmer-Controller.webp?v=1774917754"},{"product_id":"treegers-fixture-link-cable","title":"Treegers Fixture Link Cable — 4m Daisy-Chain Cable for Treegers LED Fixtures","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    If you're running more than one Treegers fixture from a single controller or dimmer, you need this cable. The Fixture Link Cable connects the signal output of one fixture to the signal input of the next, creating a daisy-chained series that lets your T Dimmer or Growcast talk to all of them at once. Four metres of IP67-rated cable, a self-locking LLT-M12 connector on each end, and a 2-year warranty. One cable per additional fixture — that's the whole story.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eDaisy-Chain Up to 50 Fixtures\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eLink fixture to fixture in series. One T Dimmer or Growcast controls the entire chain with consistent signal across all units.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFully sealed against moisture and dust ingress. Rated for the wet, humid conditions of a real grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e4-Metre Length\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEnough reach to span fixtures spaced across a 1.2m tent or connect lights in adjacent rooms.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSelf-Locking LLT-M12 Connector\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMale-female docking connector clicks and locks into place. Won't work loose in a vibrating grow room environment.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eWorks with T Dimmer and Growcast\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eCompatible with both Treegers controllers. One cable type, one connector standard, every setup sorted.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBacked by Treegers' standard accessory warranty. Built to last the distance across long cycles.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TFLK001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188108\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Any fixture with LLT M12 3-pin connector (1PIN-Dim+ \/ 2PIN-Dim- \/ 3PIN-12V)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e LLT M12-3 core male-female docking self-locking elbow\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current:\u003c\/strong\u003e 110V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 4 metres\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 175g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL E481414\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Fixture Link Cable — 4m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWith LLT M12-3 core male-female self-locking connectors on both ends. Ready to use out of the bag.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eHow Many Cables Do You Need?\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eYou need one Fixture Link Cable for each additional fixture beyond the first. Two fixtures = one cable. Three fixtures = two cables. And so on.\u003c\/li\u003e\n      \u003cli\u003eThe controller or dimmer connects to your first fixture directly — the Fixture Link Cable bridges from that fixture's signal output to the next fixture's signal input.\u003c\/li\u003e\n      \u003cli\u003eUp to 50 Treegers fixtures can be linked in a single chain from one T Dimmer or Growcast.\u003c\/li\u003e\n      \u003cli\u003eThis cable is for the signal \/ dimming connection only — each fixture still needs its own power cable connected separately.\u003c\/li\u003e\n      \u003cli\u003eNot sure how many you need for your setup? Ask The Grow Guys and we'll count it out with you.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Daisy-Chain Your Fixtures\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off all fixtures before connecting\u003c\/strong\u003e — Always wire your signal chain before switching power on. Connect everything first, then energise the circuit.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect your controller to the first fixture\u003c\/strong\u003e — Plug your T Dimmer or Growcast into the signal input port on Fixture 1. This is the master connection point for the entire chain.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eRun a Fixture Link Cable from Fixture 1 to Fixture 2\u003c\/strong\u003e — Connect one end to the signal output port on Fixture 1, and the other end to the signal input port on Fixture 2. The LLT connector clicks and locks — push firmly until you feel it seat.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eRepeat for each additional fixture\u003c\/strong\u003e — Use one Fixture Link Cable per additional light, running from the signal output of the previous fixture to the signal input of the next. Continue until all lights are chained.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect power to each fixture individually, then power on\u003c\/strong\u003e — The Fixture Link Cable handles signal only. Each fixture still needs its own power cable. Once all connections are made, switch on and confirm all fixtures respond to the controller.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning two or more GL420W fixtures? You'll need one Fixture Link Cable per additional light to sync them from a single controller.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMulti-light rooms built around the GL650W+ use the same Fixture Link Cable to chain fixtures under one controller.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning multiple GL1000W+ fixtures in a large room? Chain them all from one Growcast with Fixture Link Cables between each light.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer drives the whole chain. Add Fixture Link Cables to extend its reach across multiple fixtures.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eFor automated multi-light rooms, the Growcast pairs with Fixture Link Cables to control up to 50 fixtures on a single schedule.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eLarger tents often benefit from two fixtures side by side. The 4m cable gives you enough reach for most tent configurations.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many Fixture Link Cables do I need for my setup?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYou need one cable per additional fixture beyond the first. Two fixtures requires one cable. Three fixtures requires two cables. The controller always connects directly to the first fixture — the Fixture Link Cables handle signal between all subsequent fixtures in the chain.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this cable carry power as well as the dimming signal?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Fixture Link Cable carries the control signal only. Each fixture in the chain still requires its own separate power cable connected to a mains outlet. Do not attempt to power fixtures through the Fixture Link Cable.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the Fixture Link Cable compatible with both the T Dimmer and the Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Fixture Link Cable works with both the Treegers Precise T Dimmer and the Treegers Growcast controller, as well as any other controller using the same LLT M12 3-pin connector and 0–10V signal standard.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this cable work with non-Treegers LED fixtures?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, potentially — the cable is compatible with any fixture that uses an LLT M12 3-pin connector with the standard 1PIN-Dim+ \/ 2PIN-Dim- \/ 3PIN-12V pinout. Not all brands use this connector, so check your fixture's control port spec before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs 4 metres long enough for most grow setups?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes, for the majority of tent-based setups. The 4-metre length comfortably spans two fixtures mounted side by side in a 1.2m or larger tent, with cable to spare for routing around obstacles. For very large commercial rooms where fixtures are spread further apart, check your fixture spacing before ordering.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many fixtures can I chain together in total?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUp to 50 Treegers fixtures can be linked in a single chain from one controller or dimmer. If you're planning a large multi-light room, contact The Grow Guys to confirm your cable and controller requirements before you set up.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eOne Cable Per Fixture. Every Light in Sync.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Fixture Link Cable is the missing piece in any multi-light Treegers setup. Not sure how many you need or how to wire your room? The Grow Guys team will count it out with you.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51304974876970', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51304974876970,"sku":"TRG-ACC-CBL-4M","price":23.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-Fixture-Link-Cable-4m-Daisy-Chain-Cable-for-Treegers-LED-Fixtures.webp?v=1774917768"},{"product_id":"treegers-universal-rj10v-connection-cable","title":"Treegers Universal RJ-10V Connection Cable — 4m LLT M12 to RJ11 Dimming Cable","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    Already running a universal controller — AC Infinity, Lumatek, or another brand that uses an RJ connector — and want to bring your Treegers fixtures under its control? This is the cable that makes it happen. The Universal RJ-10V 3-Pin Connection Cable bridges the LLT M12 connector on your Treegers fixture to the RJ11 port on any third-party 0–10V universal controller. Four metres of reach, one self-locking connector on each end, and the job is done.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eUniversal Controller Compatibility\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eConnects Treegers LED fixtures to any third-party controller with a standard RJ11 \/ 0–10V control port.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eLLT M12 to RJ11 Adapter\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking LLT M12 on the fixture end, RJ11 on the controller end. Two different connector standards bridged cleanly in one cable.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e4-Metre Length\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eEnough reach to connect a wall-mounted controller to fixtures hung anywhere in a standard grow tent or room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003ePlug-and-Play Integration\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eNo adapters, no soldering, no workarounds. One cable connects your existing controller directly to your Treegers fixture.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eDual UL Certification\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eCertified under UL E481414 for the connector and UL E309471 for the wire. Tested and compliant, not guesswork.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBacked by Treegers. For a $22.50 adapter cable, covered is covered.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TUCC001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188115\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Any fixture with LLT M12 3-pin connector and any universal controller with RJ11 connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e LLT M12-3 core male docking self-locking elbow (fixture end) \/ RJ11 (controller end)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current:\u003c\/strong\u003e 30V \/ 1A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP20\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 4 metres\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 175g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL E481414 (Connector) \/ UL E309471 (Wire)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Universal RJ-10V 3-Pin Cable — 4m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eLLT M12 self-locking connector on the fixture end, RJ11 on the controller end. Ready to use straight out of the bag.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eWhich Cable Do You Actually Need?\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eUsing a Treegers Precise T Dimmer or Growcast? You do not need this cable — the T Dimmer and Growcast connect directly to Treegers fixtures via the LLT M12 connector.\u003c\/li\u003e\n      \u003cli\u003eUsing a third-party universal controller with an RJ11 port (AC Infinity, Lumatek, etc.)? This is the cable you need.\u003c\/li\u003e\n      \u003cli\u003eLinking two or more Treegers fixtures together in a chain? That requires the Fixture Link Cable (TFLK001), not this one.\u003c\/li\u003e\n      \u003cli\u003eNot sure which cable applies to your controller? Bring us the brand and model of your controller and we'll confirm before you buy.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Connect a Universal Controller to Your Treegers Fixture\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConfirm your controller uses an RJ11 \/ 0–10V output port\u003c\/strong\u003e — Check the control output port on your universal controller. It should be labelled as a 0–10V dimming output and use an RJ11 connector. If your controller uses a different port type, this cable will not fit.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off both the fixture and the controller before connecting\u003c\/strong\u003e — Always make signal connections before energising either device. This protects both the fixture's control circuitry and your controller's output port.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the LLT M12 end to your Treegers fixture\u003c\/strong\u003e — Locate the signal input port on your Treegers fixture. Push the LLT M12 connector in firmly until it clicks and locks. Give it a gentle pull to confirm it is seated.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the RJ11 end to your universal controller's dimming output\u003c\/strong\u003e — Plug the RJ11 connector into the 0–10V dimming output port on your controller. Refer to your controller's manual to confirm you're using the correct port if it has multiple RJ outputs.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower on and confirm control response\u003c\/strong\u003e — Switch on the controller first, then the fixture. Adjust the dimming output on your controller and confirm the fixture responds. If the fixture does not respond, check your controller's output type is 0–10V and not a different standard such as PWM or DALI.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eBring the GL420W into your existing controller ecosystem with this cable. One connection and it's under your controller's command.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAdding a GL650W+ to a room already running a universal controller? This cable connects it without disrupting your existing setup.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eIntegrating the GL1000W+ into a universal controller setup? Same connection — LLT M12 to your controller's RJ11 port.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-fixture-link-cable\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Fixture Link Cable\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning multiple Treegers fixtures? Use this cable for the first fixture, then Fixture Link Cables to chain the rest.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePrefer to stay in the Treegers ecosystem? The Growcast connects without an adapter cable and adds full scheduling and app control.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eBrowse the TGG controller range. If your preferred controller uses an RJ11 dimming output, this cable bridges it to any Treegers fixture.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat is the difference between this cable and the Fixture Link Cable?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe Fixture Link Cable connects one Treegers fixture to another Treegers fixture in a daisy-chain series — it carries signal between fixtures only. The Universal RJ-10V Cable connects a Treegers fixture to a third-party universal controller with an RJ11 port — it bridges two different connector standards. They serve different purposes and are not interchangeable.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need this cable if I'm using the Treegers T Dimmer or Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Treegers Precise T Dimmer and Growcast both use the same LLT M12 connector as Treegers fixtures and connect directly without any adapter cable. This cable is only needed when integrating with a third-party controller that uses an RJ11 output.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhich third-party controllers is this cable compatible with?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThis cable works with any universal controller that outputs a standard 0–10V dimming signal through an RJ11 port. Many popular environmental and lighting controllers across brands like AC Infinity and Lumatek use this standard. Check your controller's spec sheet to confirm its output port type is RJ11 and its signal standard is 0–10V before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs the cable waterproof?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this cable is rated IP20, which means it has basic protection against solid objects but is not sealed against moisture. It should be kept away from direct water exposure. For most grow room setups where the cable runs from a wall-mounted controller to a fixture, this is not an issue.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I use this cable to daisy-chain multiple Treegers fixtures to a universal controller?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003ePartially — this cable connects your universal controller to the first fixture only. To extend control to additional Treegers fixtures in the chain, use standard Treegers Fixture Link Cables from that fixture's signal output to each subsequent fixture. One Universal RJ-10V Cable to start the chain, then Fixture Link Cables to extend it.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this cable work with PWM or DALI controllers?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — Treegers fixtures use a 0–10V dimming signal standard. PWM and DALI are different control protocols and are not compatible, even if the physical connector fits. Always confirm your controller outputs a true 0–10V analog signal before purchasing this cable.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eYour Controller. Your Treegers Fixtures. One Cable.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Universal RJ-10V Cable slots your Treegers lights into whatever control system you are already running. Not sure if your controller is compatible? The Grow Guys team will confirm it for you before you buy.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51304976875818', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51304976875818,"sku":"TRG-ACC-CBL-RJ10V","price":22.49,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-Universal-RJ-10V-Connection-Cable-4m-LLT-M12-to-RJ11-Dimming-Cable.webp?v=1774917773"},{"product_id":"growcast","title":"Growcast by Treegers — Bluetooth Mesh Horticultural Lighting Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The Treegers Growcast is the step up from a simple dimmer knob to a fully automated lighting system. A pea-sized, IP66-rated controller that connects to up to 50 fixtures via daisy-chain, runs on Bluetooth Mesh without needing WiFi or a login, and lets you set schedules, sunrise\/sunset ramps, and accurate PPFD targets from the free Telos app on your phone. It works with Treegers fixtures natively and with any dimmable grow light from other brands using the included adapters. One Growcast. Total control.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eControls Up to 50 Fixtures\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDaisy-chain up to 50 Treegers fixtures to a single Growcast. Scale from one tent to a full commercial room without adding controllers.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo WiFi. No Login. No Registration.\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBluetooth Mesh 5.3 runs a private decentralised network. Nothing goes to a cloud. Just open the Telos app and connect.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSunrise and Sunset Automation\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eProgram gradual ramp-up and ramp-down cycles that mimic natural light transitions. Better for your plants, less heat stress.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eAccurate PPFD Dimming\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSet real PPFD targets instead of guessing at percentages. Map your grow room's photon data and hit actual light levels with precision.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP66 Rated — Built for the Grow Room\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003e32 x 32 x 22mm, 80g, and IP66 rated. Mount it inside the tent. It handles dust and water without complaint.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eUniversal Compatibility\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eWorks with Treegers fixtures natively and with any dimmable grow light using 1–10V or PWM via the included RJ11 adapters.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TGC0001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnection Interface:\u003c\/strong\u003e LLT Connector + RJ11 and linking adaptors\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eUser Interface:\u003c\/strong\u003e Smartphone app or manual touch sensor\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Range:\u003c\/strong\u003e 10–100% and dim to off\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Protocol:\u003c\/strong\u003e 1–10V or PWM\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e USB-C cable or 12V supply from LED driver\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWireless Technology:\u003c\/strong\u003e Bluetooth Mesh version 5.3\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eControl App:\u003c\/strong\u003e Telos Mesh\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eApp Availability:\u003c\/strong\u003e Android and iOS\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP66\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 32 x 32 x 22mm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 80g\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 250mm\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Treegers Growcast Controller\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eThe controller unit itself — compact, IP66 rated, with 250mm cable and LLT connector.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x 2m USB-C Cable\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFor powering the Growcast from a USB-C power source when not powered via the LED driver.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x RJ11 Adapter Type 1 + Type 2\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTwo RJ11 adapters for connecting the Growcast to non-Treegers dimmable LED fixtures from other manufacturers.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Steel Mounting Plate\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFor a clean, secure installation inside your tent or grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Treegers Storage Tin\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eFor storing adapters and accessories neatly when not in use.\u003c\/span\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x User Guide\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSetup instructions and app guidance to get you connected quickly.\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGrowcast vs T Dimmer — Know the Difference Before You Buy\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThe T Dimmer is a manual knob. Set it by hand, leave it alone. No app, no scheduling, no automation. Perfect for simple single-tent setups.\u003c\/li\u003e\n      \u003cli\u003eThe Growcast is a smart controller. Set schedules, sunrise\/sunset ramps, PPFD targets, and multi-room sequences from your phone. Made for growers who want hands-off automation.\u003c\/li\u003e\n      \u003cli\u003eIf you check your tent daily and prefer to adjust manually, save the money and get the T Dimmer.\u003c\/li\u003e\n      \u003cli\u003eIf you want your lights to handle themselves — scheduled on\/off, gradual ramps, accurate dimming — the Growcast earns its $275.\u003c\/li\u003e\n      \u003cli\u003eBoth connect to Treegers fixtures via the same LLT connector. Upgrading from T Dimmer to Growcast later is a straight swap.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Set Up the Growcast\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDownload the Telos Mesh app\u003c\/strong\u003e — Available free on Android and iOS. No login, no registration, no account required. Open it once and it's ready to connect.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower off your fixtures before connecting\u003c\/strong\u003e — Wire the signal connections first, then energise. Connect the Growcast's LLT connector to the signal input port on your first Treegers fixture.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDaisy-chain additional fixtures with Fixture Link Cables\u003c\/strong\u003e — For multi-light setups, run a Fixture Link Cable from the signal output of your first fixture to the signal input of the second, and repeat for each additional light. Up to 50 fixtures can be chained from one Growcast.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower the Growcast\u003c\/strong\u003e — Either plug the USB-C cable into a USB power source, or power it from the LED driver's 12V supply port if your fixture supports this. The Growcast will begin broadcasting its Bluetooth Mesh network automatically.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eAdd the Growcast in the Telos app\u003c\/strong\u003e — Open the Telos Mesh app, tap \"add,\" and the app will detect the newly formed Bluetooth Mesh network. Select it to pair. No WiFi, no passwords, no cloud sync required.\u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eProgram your schedule, ramps, and PPFD targets\u003c\/strong\u003e — Set on\/off times, sunrise and sunset ramp durations, and target PPFD values directly in the app. Once set, the Growcast runs independently — no phone needed after setup. Adjust anytime from Bluetooth range.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n    \u003ca href=\"\/products\/treegers-gl420w-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL420W LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe Growcast is the natural upgrade path from a basic T Dimmer on the GL420W. One cable swap and you're fully automated.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eLarger rooms running the GL650W+ benefit most from the Growcast's scheduling and PPFD targeting capabilities.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAt 1000W, the Growcast's automated scheduling and ramp control is highly recommended — running this fixture manually at full blast from day one is rarely the right move.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-fixture-link-cable\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Fixture Link Cable\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eOne Fixture Link Cable per additional light in your chain. Essential for any multi-fixture Growcast setup.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/products\/treegers-quantum-par-meter\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Quantum PAR Meter\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eTo use the Growcast's PPFD targeting properly, you need measured canopy data. The Treegers PAR Meter gives you those numbers.\u003c\/p\u003e\n    \u003c\/a\u003e\n    \u003ca href=\"\/collections\/environment-controllers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eEnvironment Controllers\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePair the Growcast's light automation with a separate environment controller handling temperature, humidity, and ventilation for a fully automated grow room.\u003c\/p\u003e\n    \u003c\/a\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the Growcast need WiFi to work?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the Growcast runs on Bluetooth Mesh 5.3, which creates its own private decentralised network without any WiFi, router, or internet connection required. It also does not require a login or account registration to use the Telos app. Your data stays on your device.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many lights can one Growcast control?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eOne Growcast can control up to 50 Treegers fixtures in a single daisy-chain using Fixture Link Cables. The Bluetooth Mesh protocol supports 1 to 1000 lights across a network — for grows larger than 50 fixtures, additional Growcast units can be networked together on the same Telos app.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill the Growcast work with non-Treegers LED fixtures?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Growcast is designed to be brand-agnostic. It works with any dimmable grow light that accepts a 1–10V or PWM control signal using the included RJ11 Type 1 and Type 2 adapters. Check your fixture's control input type against those standards to confirm compatibility before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat does PPFD dimming actually do?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eMost dimmers show a percentage — but a 50% setting doesn't always mean 50% of actual light output, because light output isn't perfectly linear with power input. The Growcast's PPFD dimming lets you input your canopy's measured PPFD data and set a real target light level in μmol\/m2\/s rather than guessing at percentages. This requires a PAR meter reading to be useful — the Treegers Quantum PAR Meter is the recommended tool for this.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes the schedule keep running if my phone is out of Bluetooth range?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — once a schedule is programmed into the Growcast via the app, it stores and runs the schedule autonomously. The phone only needs to be in Bluetooth range to make changes or monitor the system. Your lights will follow the set schedule regardless of whether your phone is nearby.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control the Growcast manually without the app?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — the Growcast includes a manual touch sensor for basic control without the app. The Telos app unlocks the full feature set including scheduling, PPFD targeting, and sunrise\/sunset ramps, but the touch sensor gives you a fallback option if needed.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I still need Fixture Link Cables with the Growcast?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — for multi-fixture setups, the Growcast connects to your first fixture directly and Treegers Fixture Link Cables (sold separately) chain the signal through each subsequent fixture. One Fixture Link Cable per additional light beyond the first. The Growcast does not control fixtures wirelessly — the signal runs through the physical cable chain.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eSet It. Schedule It. Walk Away.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThe Growcast turns your Treegers setup into a fully automated lighting system. No WiFi, no subscriptions, no fuss. Questions about compatibility or setting up your room? The Grow Guys team has you covered.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt('51305053585706', 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51305053585706,"sku":"TRG-CTRL-GCT-BT53","price":274.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Growcast-by-Treegers-Bluetooth-Mesh-Horticultural-Lighting-Controller.webp?v=1774917776"},{"product_id":"treegers-gl650w-plus-driver-extension-kit","title":"Treegers GL650W+ Driver Extension Kit — 3m Power and Dimming Cable Set","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The GL650W+ driver mounts remotely by design — but the standard cabling that ships with the fixture only gets you so far. If your room layout means the driver needs to sit more than arm's reach from the fixture frame, this kit is what you need. Two 3-metre extension cables — one for power, one for dimming — that replace the stock connections and let you position the GL650W+ driver up to 3 metres away from the bars without any voltage drop or signal loss. Nothing more, nothing less.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3 Metres of Driver Clearance\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMount the GL650W+ driver up to 3 metres from the fixture frame — on a wall, outside the tent, or on an adjacent rack — without power or signal loss.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTwo Cables Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eOne power extension cable and one dimming extension cable — both required for full remote driver operation, both in the kit.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBoth cables carry IP67 protection — fully sealed against moisture and dust, built to survive the conditions of a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Voltage Drop\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRated at 300V\/600V and 20A\/10A respectively. Designed specifically for the GL650W+ driver load — no derating, no compromise.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eJnicon M19 Connectors\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking Jnicon connectors match the GL650W+ driver and frame ports exactly. Click in, lock, done.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUL-certified cables backed by Treegers' 2-year accessory warranty.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TDEK001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188085\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GL650W+ fixtures with Jnicon M19 3-pin connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Jnicon 53-100331-02 \/ 53-200311-02 (power); Jnicon 54-100331-02 \/ 54-200311-02 (dimming)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Power Cable:\u003c\/strong\u003e 300V \/ 20A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Dimming Cable:\u003c\/strong\u003e 600V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres each\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600g (power cable); 200g (dimming cable)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL2238 E500203\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Power Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Replaces the stock power connection between the GL650W+ driver and fixture frame.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Dimming Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Extends the dimming signal connection from the driver to the fixture without signal degradation.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGL650W+ Only — This Kit Is Not Universal\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThis kit is designed exclusively for the GL650W+ fixture. It uses Jnicon M19 connectors specific to that driver and frame — it will not fit the GL1000W+ or any other Treegers model.\u003c\/li\u003e\n      \u003cli\u003eIf you are running a GL1000W+, there is a separate GL1000W+ Driver Extension Kit available. The GL1000W+ kit includes three cables (two power, one dimming) to match that fixture's driver configuration.\u003c\/li\u003e\n      \u003cli\u003eBoth the power and dimming cables in this kit must be installed together. Running only the power extension without replacing the dimming cable will leave the signal path on the shorter stock cable.\u003c\/li\u003e\n      \u003cli\u003eThe 3-metre extension is the maximum rated distance for this kit. Do not attempt to chain two kits together to gain 6 metres — this is not rated or supported by Treegers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Install the Driver Extension Kit\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower everything off before disconnecting anything\u003c\/strong\u003e — Disconnect the GL650W+ from mains power and allow it to fully cool before touching any cables or connections. Never work on a live fixture.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect the stock power cable from the driver and frame\u003c\/strong\u003e — The original power cable between the GL650W+ driver and frame uses the same Jnicon M19 connector as this kit. Twist the locking ring to release, pull the connector clear, and set the stock cable aside.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the power extension cable in its place\u003c\/strong\u003e — Run the 3-metre power extension cable from the driver to the fixture frame. Push each Jnicon connector in firmly until the locking ring engages. Route the cable cleanly to avoid pinch points or excessive tension.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eReplace the dimming cable in the same way\u003c\/strong\u003e — Disconnect the stock dimming cable and connect the 3-metre dimming extension in its place, running it alongside the power cable to the same remote driver position. Lock both Jnicon connectors at each end.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the driver at the desired remote location\u003c\/strong\u003e — Use the GL650W+ driver support brackets (included with the fixture) to secure the driver on a tent wall, equipment rail, or adjacent surface at the full 3-metre extension distance. Ensure it has airflow around it.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower on and verify normal operation\u003c\/strong\u003e — Reconnect mains power and confirm the fixture powers up correctly and responds to your controller or dimmer. If the fixture does not respond to dimming commands, check the dimming cable connections at both ends first.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThis kit exists for one fixture. If you're running the GL650W+ and need driver clearance, this is the only way to get it.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eWith the driver remotely mounted, the Growcast connects directly to it and automates scheduling and PPFD control from your phone.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eIf you're using a T Dimmer rather than the Growcast, it connects to the remotely mounted driver the same way — no additional cables required.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRemotely mounting the driver outside the tent reduces heat load inside the canopy — a meaningful benefit in a sealed environment at 650W.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline and Exhaust Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMoving the driver out of the tent pairs well with dialling in your exhaust — less heat source inside means more efficient ventilation.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-driver-extension-kit\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ Driver Extension Kit\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a GL1000W+ instead? The GL1000W+ has its own dedicated extension kit — not this one. Check the Treegers collection.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this kit work with the GL1000W+ or GL420W?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this kit is designed exclusively for the GL650W+. It uses Jnicon M19 connectors specific to the GL650W+ driver configuration and will not fit the GL1000W+, GL420W, or GL300W. The GL1000W+ has its own separate extension kit. The GL420W and GL300W have integrated drivers and do not support remote driver mounting.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need to install both cables, or can I just use the power cable?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eBoth cables must be installed together. The power cable extends the electrical supply between driver and fixture; the dimming cable extends the control signal. If you only extend the power connection and leave the stock dimming cable in place, the dimming cable becomes the limiting factor on how far the driver can be positioned. For a full 3-metre remote driver setup, both cables are required.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I chain two kits together to get 6 metres of distance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — 3 metres is the maximum rated distance for this kit. Chaining two kits is not supported by Treegers, is not covered under warranty, and may result in voltage drop on the power cable or signal degradation on the dimming connection. If your installation requires more than 3 metres of driver clearance, contact The Grow Guys to discuss alternatives before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhy would I want to mount the driver remotely?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe GL650W+ driver generates heat during operation. Mounting it outside the grow tent or away from the canopy keeps that heat source outside the growing environment, which reduces the total thermal load your exhaust system needs to manage. It also makes the driver more accessible for inspection and maintenance without disturbing the canopy or opening the tent. For tightly managed grow rooms at 650W, remote driver mounting is worth the $58 to get the heat out.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this kit affect dimming performance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the dimming extension cable is rated and tested for use at 3 metres without signal loss. Your T Dimmer, Growcast, or universal controller will communicate with the driver exactly as it would with the stock cabling. No recalibration or adjustment is needed after installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eGet Your Driver Out of the Tent.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eLess heat inside the canopy. More flexibility in your room layout. Two cables, 3 metres, done. Questions about your GL650W+ installation? The Grow Guys team is here.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt(51338813931818, 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51338813931818,"sku":"TRG-ACC-EXT-GL650","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-GL650W-Driver-Extension-Kit-3m-Power-and-Dimming-Cable-Set.webp?v=1774917921"},{"product_id":"treegers-gl1000w-plus-driver-extension-kit","title":"Treegers GL1000W+ Driver Extension Kit — 3m Power and Dimming Cable Set","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The GL1000W+ driver mounts remotely by design, and at 1000W there is a real payoff to getting it out of the growing environment. This kit gives you 3 metres of clearance between the driver and the fixture frame using three cables — two for the dual power inputs on the GL1000W+ driver, and one for the dimming connection — all without voltage drop or signal loss. It is the same build quality as the GL650W+ kit: IP67 rated, Jnicon M19 connectors, UL-certified. The only difference is the extra power cable the GL1000W+ needs.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3 Metres of Driver Clearance\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePosition the GL1000W+ driver up to 3 metres from the fixture bars — outside the tent, on a wall, or on an equipment rail — without power or signal loss.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eThree Cables — All Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTwo power extension cables for the GL1000W+'s dual power inputs, plus one dimming extension cable. Everything the driver needs to run remotely.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAll three cables carry IP67 protection — fully sealed against moisture and dust ingress for reliable operation in a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Voltage Drop\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRated at 300V\/600V and 20A\/10A respectively. Designed for the GL1000W+ driver load — the full 1000W supply carries cleanly across 3 metres.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eJnicon M19 Connectors\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking Jnicon connectors match the GL1000W+ driver and frame ports exactly. Push in, lock, no tools needed.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUL-certified under UL2238 E500203. Backed by Treegers' 2-year accessory warranty.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TDEK002\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188092\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GL1000W+ fixtures with Jnicon M19 3-pin connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Jnicon 53-100331-02 \/ 53-200311-02 (power); Jnicon 54-100331-02 \/ 54-200311-02 (dimming)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Power Cables:\u003c\/strong\u003e 300V \/ 20A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Dimming Cable:\u003c\/strong\u003e 600V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres each\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600g x2 (power cables); 200g (dimming cable)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL2238 E500203\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2x Driver Power Extension Cables — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connectors. Two cables required for the GL1000W+'s dual power input configuration.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Dimming Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Extends the dimming signal from the driver to the fixture without degradation.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGL1000W+ Only — This Kit Is Not Interchangeable With the GL650W+ Kit\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThis kit is designed exclusively for the GL1000W+ fixture. The GL1000W+ driver has two power inputs — this kit includes two power cables to match. The GL650W+ kit only includes one power cable and will not fully supply the GL1000W+ driver.\u003c\/li\u003e\n      \u003cli\u003eIf you are running a GL650W+, there is a separate GL650W+ Driver Extension Kit. Do not mix kits between fixture models.\u003c\/li\u003e\n      \u003cli\u003eAll three cables must be installed together. Running only the power extensions without replacing the dimming cable leaves the signal path limited to the shorter stock cable length.\u003c\/li\u003e\n      \u003cli\u003e3 metres is the maximum rated distance for this kit. Chaining two kits is not supported, not rated, and not covered under warranty.\u003c\/li\u003e\n      \u003cli\u003eThe GL420W and GL300W have integrated drivers and do not support remote driver mounting — this kit will not fit those fixtures.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Install the GL1000W+ Driver Extension Kit\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect from mains power and allow the fixture to cool\u003c\/strong\u003e — Never work on a live or recently operated fixture. Disconnect from power completely and wait for the driver and bars to cool before touching any cables or connections.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect both stock power cables from the driver\u003c\/strong\u003e — The GL1000W+ driver has two power input ports. Locate both stock power cables, twist the locking ring on each Jnicon connector to release, and pull both clear. Set them aside.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect both power extension cables in their place\u003c\/strong\u003e — Run the two 3-metre power extension cables from the driver's power input ports to their corresponding ports on the fixture frame. Push each Jnicon connector in firmly until it locks. Route cables cleanly without excessive tension or pinch points.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect and replace the dimming cable\u003c\/strong\u003e — Remove the stock dimming cable and connect the 3-metre dimming extension in its place. Run it alongside the power cables to the same remote driver position and lock both ends of the Jnicon connector.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the driver at the remote position\u003c\/strong\u003e — Secure the driver using the GL1000W+'s included driver support brackets on a tent wall, equipment rail, or adjacent structure at the desired location within the 3-metre cable run. Ensure there is airflow around the driver casing.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eReconnect mains power and verify operation\u003c\/strong\u003e — Power on and confirm the fixture illuminates at full output and responds correctly to your controller or dimmer. If the fixture does not respond to dimming commands, check both ends of the dimming extension cable first. If power output seems reduced, verify both power extension cables are fully locked at each end.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThis kit exists for this fixture only. Running the GL1000W+ in a space where the driver position matters? This is how you get the placement flexibility you need.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eWith the driver remotely mounted, the Growcast connects to it directly to automate scheduling and PPFD control without needing to access the grow space.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer connects directly to the remotely mounted driver via the LLT port — the extension cables do not affect dimmer compatibility.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline and Exhaust Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAt 1000W, moving the driver heat source outside the tent meaningfully reduces what your extraction system has to shift. Worth doing with proper ventilation.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePositioning the driver outside your tent keeps internal temperatures lower and makes the driver accessible for inspection without opening the canopy.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-gl650w-plus-driver-extension-kit\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ Driver Extension Kit\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a GL650W+ instead? Its dedicated kit includes one power cable and one dimming cable — not this one. Check the Treegers collection for the correct kit.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhy does this kit include two power cables when the GL650W+ kit only has one?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe GL1000W+ driver has two power input connections to handle the higher 1000W load — the same reason the GL1000W+ driver is physically larger than the GL650W+ driver. Each power input needs its own extension cable for remote mounting. The GL650W+ driver only has one power input, which is why its kit contains one power cable. Using the GL650W+ kit on a GL1000W+ would leave one power input unextended.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this kit work with the GL650W+ fixture?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this kit is designed for the GL1000W+ only. While the Jnicon M19 connector type is the same across Treegers GL+ fixtures, the GL1000W+ kit includes two power cables for the dual power input configuration of that specific driver. Using it on a GL650W+ is not supported. The GL650W+ has its own dedicated extension kit.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo all three cables need to be installed, or can I just use the power cables?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eAll three cables must be installed together. If you extend the two power connections but leave the original dimming cable in place, the dimming cable becomes the limiting factor on how far the driver can be positioned. For the full 3-metre remote driver setup, all three extensions are required.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I chain two kits to get 6 metres of distance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — 3 metres is the maximum rated distance for this kit. Chaining two kits is not supported by Treegers, is not covered under warranty, and risks voltage drop on the power cables at the combined length. If your installation genuinely requires more than 3 metres of driver clearance, contact The Grow Guys before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes remote driver mounting affect performance or dimming response?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — both the power and dimming cables are rated and tested for 3 metres without voltage drop or signal degradation. The GL1000W+ fixture will operate at the same output and dimming response as it would with the stock cable lengths. No recalibration is needed after installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhere should I mount the driver once it is remotely positioned?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUse the GL1000W+'s included driver support brackets to mount the driver on a tent wall, equipment rail, or adjacent structure. The driver should have clear airflow around it — do not mount it in an enclosed cabinet or against a surface that blocks all sides. Outside the tent is ideal. Ensure the mounting point is load-rated for the driver weight and that the cable runs are free of tension and pinch points.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eGet the 1000W Driver Out of the Tent.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThree cables, 3 metres, no heat compromise. Questions about your GL1000W+ installation or driver positioning? The Grow Guys team has you covered.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt(51338847519018, 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51338847519018,"sku":"TRG-ACC-EXT-GL1000","price":94.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-GL1000W-Driver-Extension-Kit-3m-Power-and-Dimming-Cable-Set.webp?v=1774917926"},{"product_id":"lumatek-digital-panel-plus-2-0-controller","title":"Lumatek Digital Panel PLUS 2.0 — Dual Signal HID + LED Lighting Controller","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The Lumatek Digital Panel PLUS 2.0 is a dual-signal lighting controller that runs both HID ballasts and LED drivers from a single unit. Two independent zones, 400 HID ballasts or 100 LED drivers total, 1% dimming precision, temperature safety automation, and Sunrise\/Sunset simulation — all from a box the size of a paperback. If you are running any Lumatek controllable fixture and still using a basic timer, this is the upgrade that actually matters.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eDual Signal — HID + LED\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRS485 digital for HID, 0-10V analogue for LED. Run both simultaneously from two independent zones on one controller.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTemperature Safety Automation\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eIncluded temp sensors trigger automatic dimming or switch-off if your room hits preset thresholds. Fixtures protect themselves.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1% Dimming Precision\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eDial in exact light intensity across the full 10%–115% power range. Automate PPFD targets by growth stage without touching the fixtures.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSunrise and Sunset Modes\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eGradual light transitions up to 30 minutes. Reduces plant stress at light-on and light-off — a genuine agronomic benefit, not a gimmick.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSpecifications\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003cbr\u003eLUMM0019\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003cbr\u003eAdaptor 100–240V AC, 50\/60Hz — DC 5V\/2A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatible HID Ballasts\u003c\/strong\u003e\u003cbr\u003e315W, 600W, 630W, 1000W\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatible LED Drivers\u003c\/strong\u003e\u003cbr\u003eAll Lumatek Controllable LED Drivers\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSignal Protocol — HID\u003c\/strong\u003e\u003cbr\u003eRS485 Digital\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSignal Protocol — LED\u003c\/strong\u003e\u003cbr\u003e0-10V Analogue\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eZones\u003c\/strong\u003e\u003cbr\u003e2 (Zone A + Zone B), independently configurable\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eMax Devices per Zone — HID\u003c\/strong\u003e\u003cbr\u003e200 ballasts (RS485)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eMax Devices per Zone — LED\u003c\/strong\u003e\u003cbr\u003e50 drivers (0-10V)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eTotal Capacity\u003c\/strong\u003e\u003cbr\u003e400 HID ballasts or 100 LED drivers\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Range\u003c\/strong\u003e\u003cbr\u003e10% – 115%\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimming Accuracy\u003c\/strong\u003e\u003cbr\u003e1% increments\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSafety Dimming Range\u003c\/strong\u003e\u003cbr\u003e0°C – 40°C\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSafety Switching Range\u003c\/strong\u003e\u003cbr\u003e10°C – 50°C\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eSunrise \/ Sunset Duration\u003c\/strong\u003e\u003cbr\u003e0 – 30 minutes\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e125 x 80 x 25 mm\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e1x Lumatek Digital Panel Plus 2.0\u003c\/div\u003e\n    \u003cdiv\u003e1x Power Adaptor and Cable\u003c\/div\u003e\n    \u003cdiv\u003e2x Temperature Sensor Cable (5m each)\u003c\/div\u003e\n    \u003cdiv\u003e2x HID Control Link Cable (5m each)\u003c\/div\u003e\n    \u003cdiv\u003e2x LED Control Link Cable\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Amber Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eTGG Grower Tips\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eZone A and Zone B are completely independent. You can run your veg room on Zone A and your flower room on Zone B with different schedules, dimming levels, and wattages — on one controller.\u003c\/li\u003e\n      \u003cli\u003eEach zone can only control the same type and wattage of ballasts or drivers. If you are mixing wattages, split them across zones accordingly.\u003c\/li\u003e\n      \u003cli\u003eThe temperature sensors are your safety net — install them at canopy level, not high on the wall. Where the plant is, is where the temperature reading matters.\u003c\/li\u003e\n      \u003cli\u003eSunrise\/Sunset mode does more than reduce stress. A gradual ramp-up gives your fans and environmental controls time to respond before full light load hits the room.\u003c\/li\u003e\n      \u003cli\u003eThe dimming range goes to 115%. This allows you to run Lumatek HID ballasts above their rated wattage on supported models — only do this if your ballast spec sheet explicitly lists it as a supported mode.\u003c\/li\u003e\n      \u003cli\u003eThis controller is Lumatek-ecosystem specific. It will not reliably control non-Lumatek fixtures via RS485. The 0-10V LED channel is more universal — check your LED driver's compatibility before assuming it will work.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- Zone Setup Explained --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow the Two-Zone System Works\u003c\/h2\u003e\n  \u003cp style=\"font-size: 0.95rem; line-height: 1.7; margin-bottom: 2rem;\"\u003e\n    Zone A and Zone B each operate on their own signal, schedule, and dimming program — they do not talk to each other. Each zone can control up to 200 HID ballasts via RS485 or up to 50 LED drivers via 0-10V, giving you up to 400 HID or 100 LED devices from one controller. You can use the two zones to manage two separate rooms on different light cycles, or run them in the same room with two different fixture types — for example, Zone A managing LED bars at 600W and Zone B handling HID ballasts at 315W. The one rule is that each zone must only control identical-wattage devices. Mix wattages and the RS485 daisy chain breaks down. Keep it clean: same wattage per zone, different wattages split across zones.\n  \u003c\/p\u003e\n\n  \u003c!-- How to Set Up --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eSetting Up Your Digital Panel PLUS 2.0\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the controller\u003c\/strong\u003e on a wall or vertical surface outside your grow space, in a position where you can read the display and reach it without entering the room. The included power adaptor runs on 100–240V AC — plug it into a standard Australian outlet.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eRun the control link cables\u003c\/strong\u003e from the controller to your fixtures. For HID, use the HID control link cables (5m included) in a daisy-chain from Zone A or Zone B to your ballasts in sequence. For LED, connect the LED control link cables to your drivers via the 0-10V port. Additional daisy-chain cables are available separately if your room requires longer runs.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eInstall the temperature sensors\u003c\/strong\u003e (two included, 5m cables each). Position one sensor per zone at canopy height — this is the temperature that matters for your plants and for the safety dimming to respond correctly. Secure the sensor cable so it does not contact hot fixture surfaces or get waterlogged.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eProgram your light schedule\u003c\/strong\u003e through the controller menu. Set your on\/off times for each zone independently. Configure your Sunrise and Sunset duration (0–30 minutes), set your target dimming level for each growth stage, and configure temperature thresholds for safety dimming and switch-off.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eTest each zone\u003c\/strong\u003e before leaving the system to run unattended. Manually trigger a dim-up and dim-down through the controller menu, confirm the correct fixtures respond, and verify the temperature sensor readings are within expected range. Check that both zones respond independently if running dual rooms.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSet your safety thresholds and walk away.\u003c\/strong\u003e The controller monitors temperature continuously and will automatically dim or kill power to your fixtures if your room overheats. This is not a feature you set once and forget — revisit it at the start of each season when ambient temperatures change significantly.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/lumatek-ats300w-pro-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eLumatek ATS300W PRO\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe ATS300W PRO connects directly to the 0-10V LED channel. One controller can run up to 50 of these fixtures per zone.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/zeus-600w-pro-3-1-led-grow-light-by-lumatek\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eLumatek Zeus 600W PRO\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe Digital Panel PLUS 2.0 is the native controller for the Zeus range. Timing, dimming, and Sunrise\/Sunset all managed from one unit.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/lumatek\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eLumatek HID Ballasts\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eCompatible with Lumatek controllable HID ballasts at 315W, 600W, 630W, and 1000W via RS485 daisy-chain on Zone A or Zone B.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning two-zone control works particularly well across two tents — veg in one, flower in another, both managed from the same controller.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I control both HID and LED lights at the same time?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — that is the entire point of the dual-signal design. Put your HID ballasts on one zone using the RS485 digital signal and your LED drivers on the other zone using the 0-10V analogue signal. Each zone runs its own independent schedule and dimming program. You cannot mix HID and LED on the same zone.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill it work with non-Lumatek fixtures?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eFor HID via RS485, no — this protocol is proprietary to Lumatek and the Digital Panel PLUS 2.0 will not reliably control other brands via that channel. For LED via 0-10V, it is more likely to work with non-Lumatek drivers that accept a standard 0-10V dimming signal, but Lumatek does not guarantee compatibility outside their own range. Test before relying on it in a production environment.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow many fixtures can one controller run?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUp to 400 HID ballasts total (200 per zone via RS485), or up to 100 LED drivers total (50 per zone via 0-10V). You can mix both types across the two zones — for example, 200 HID on Zone A and 50 LED on Zone B simultaneously. These are the maximum limits per the manufacturer spec.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I run two different wattages of ballast on the same controller?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes — but not on the same zone. Each zone must control identical-wattage devices only. If you need to run 600W and 315W HID ballasts in the same room, put the 600W ballasts on Zone A and the 315W ballasts on Zone B. The two zones can then run independently with different power levels and schedules.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhat does the temperature safety system actually do?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eTwo things, at two different temperature thresholds. Between 0°C and 40°C, if your room temperature rises the controller automatically dims the lights down to reduce heat load. If the temperature hits your configured switching threshold (between 10°C and 50°C), the controller shuts the lights off completely. Both thresholds are configurable. The fixtures come back on once the temperature drops back within range. This protects your crop and your gear when your cooling fails or your room heats up unexpectedly.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need additional cables beyond what is included?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003ePossibly — it depends on your room size and fixture count. The box includes two HID control link cables (5m each) and two LED control link cables, which is enough to get a standard small room connected. For larger rooms with many fixtures in a daisy-chain, you will need additional Lumatek daisy-chain cables, sold separately. Measure your runs before ordering to avoid running short.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n    \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs Sunrise\/Sunset mode just a gimmick?\u003c\/summary\u003e\n    \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — there is genuine agronomic reason to use it. Abrupt light-on events create a sharp thermal and photosynthetic shock to plants, particularly at high light intensities. A gradual ramp from 0% to full power over 15–30 minutes mirrors natural dawn conditions and is associated with reduced plant stress and more consistent stomatal behaviour. It also gives your environmental controls — fans, AC, CO2 — time to respond to rising light load before the room is at full intensity.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eTake Control of Your Lumatek Setup\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eTwo zones, 400 fixtures, 1% precision. In stock and shipping Australia-wide from TGG. Not sure if this works with your setup? Ask us.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/lumatek\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Lumatek\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('51379141542186', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#388e3c';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#4caf50';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#4caf50';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"Lumatek","offers":[{"title":"Default Title","offer_id":51379141542186,"sku":"LUM-CTRL-PANEL-PLUS2","price":699.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Lumatek-Digital-Panel-PLUS-2_0-Dual-Signal-HID-LED-Lighting-Controller.webp?v=1776901734"}],"url":"https:\/\/www.thegrowguys.com.au\/collections\/light-controllers-cables.oembed","provider":"The Grow Guys","version":"1.0","type":"link"}