{"product_id":"treegers-gl1000w-plus-driver-extension-kit","title":"Treegers GL1000W+ Driver Extension Kit — 3m Power and Dimming Cable Set","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The GL1000W+ driver mounts remotely by design, and at 1000W there is a real payoff to getting it out of the growing environment. This kit gives you 3 metres of clearance between the driver and the fixture frame using three cables — two for the dual power inputs on the GL1000W+ driver, and one for the dimming connection — all without voltage drop or signal loss. It is the same build quality as the GL650W+ kit: IP67 rated, Jnicon M19 connectors, UL-certified. The only difference is the extra power cable the GL1000W+ needs.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3 Metres of Driver Clearance\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003ePosition the GL1000W+ driver up to 3 metres from the fixture bars — outside the tent, on a wall, or on an equipment rail — without power or signal loss.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eThree Cables — All Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTwo power extension cables for the GL1000W+'s dual power inputs, plus one dimming extension cable. Everything the driver needs to run remotely.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAll three cables carry IP67 protection — fully sealed against moisture and dust ingress for reliable operation in a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Voltage Drop\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRated at 300V\/600V and 20A\/10A respectively. Designed for the GL1000W+ driver load — the full 1000W supply carries cleanly across 3 metres.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eJnicon M19 Connectors\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking Jnicon connectors match the GL1000W+ driver and frame ports exactly. Push in, lock, no tools needed.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUL-certified under UL2238 E500203. Backed by Treegers' 2-year accessory warranty.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TDEK002\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188092\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GL1000W+ fixtures with Jnicon M19 3-pin connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Jnicon 53-100331-02 \/ 53-200311-02 (power); Jnicon 54-100331-02 \/ 54-200311-02 (dimming)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Power Cables:\u003c\/strong\u003e 300V \/ 20A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Dimming Cable:\u003c\/strong\u003e 600V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres each\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600g x2 (power cables); 200g (dimming cable)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL2238 E500203\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Bag --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Bag\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2x Driver Power Extension Cables — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connectors. Two cables required for the GL1000W+'s dual power input configuration.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Dimming Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Extends the dimming signal from the driver to the fixture without degradation.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGL1000W+ Only — This Kit Is Not Interchangeable With the GL650W+ Kit\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThis kit is designed exclusively for the GL1000W+ fixture. The GL1000W+ driver has two power inputs — this kit includes two power cables to match. The GL650W+ kit only includes one power cable and will not fully supply the GL1000W+ driver.\u003c\/li\u003e\n      \u003cli\u003eIf you are running a GL650W+, there is a separate GL650W+ Driver Extension Kit. Do not mix kits between fixture models.\u003c\/li\u003e\n      \u003cli\u003eAll three cables must be installed together. Running only the power extensions without replacing the dimming cable leaves the signal path limited to the shorter stock cable length.\u003c\/li\u003e\n      \u003cli\u003e3 metres is the maximum rated distance for this kit. Chaining two kits is not supported, not rated, and not covered under warranty.\u003c\/li\u003e\n      \u003cli\u003eThe GL420W and GL300W have integrated drivers and do not support remote driver mounting — this kit will not fit those fixtures.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Install the GL1000W+ Driver Extension Kit\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect from mains power and allow the fixture to cool\u003c\/strong\u003e — Never work on a live or recently operated fixture. Disconnect from power completely and wait for the driver and bars to cool before touching any cables or connections.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect both stock power cables from the driver\u003c\/strong\u003e — The GL1000W+ driver has two power input ports. Locate both stock power cables, twist the locking ring on each Jnicon connector to release, and pull both clear. Set them aside.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect both power extension cables in their place\u003c\/strong\u003e — Run the two 3-metre power extension cables from the driver's power input ports to their corresponding ports on the fixture frame. Push each Jnicon connector in firmly until it locks. Route cables cleanly without excessive tension or pinch points.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect and replace the dimming cable\u003c\/strong\u003e — Remove the stock dimming cable and connect the 3-metre dimming extension in its place. Run it alongside the power cables to the same remote driver position and lock both ends of the Jnicon connector.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the driver at the remote position\u003c\/strong\u003e — Secure the driver using the GL1000W+'s included driver support brackets on a tent wall, equipment rail, or adjacent structure at the desired location within the 3-metre cable run. Ensure there is airflow around the driver casing.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eReconnect mains power and verify operation\u003c\/strong\u003e — Power on and confirm the fixture illuminates at full output and responds correctly to your controller or dimmer. If the fixture does not respond to dimming commands, check both ends of the dimming extension cable first. If power output seems reduced, verify both power extension cables are fully locked at each end.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-led-grow-light\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThis kit exists for this fixture only. Running the GL1000W+ in a space where the driver position matters? This is how you get the placement flexibility you need.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eWith the driver remotely mounted, the Growcast connects to it directly to automate scheduling and PPFD control without needing to access the grow space.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe T Dimmer connects directly to the remotely mounted driver via the LLT port — the extension cables do not affect dimmer compatibility.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline and Exhaust Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAt 1000W, moving the driver heat source outside the tent meaningfully reduces what your extraction system has to shift. Worth doing with proper ventilation.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePositioning the driver outside your tent keeps internal temperatures lower and makes the driver accessible for inspection without opening the canopy.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-gl650w-plus-driver-extension-kit\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ Driver Extension Kit\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a GL650W+ instead? Its dedicated kit includes one power cable and one dimming cable — not this one. Check the Treegers collection for the correct kit.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhy does this kit include two power cables when the GL650W+ kit only has one?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe GL1000W+ driver has two power input connections to handle the higher 1000W load — the same reason the GL1000W+ driver is physically larger than the GL650W+ driver. Each power input needs its own extension cable for remote mounting. The GL650W+ driver only has one power input, which is why its kit contains one power cable. Using the GL650W+ kit on a GL1000W+ would leave one power input unextended.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this kit work with the GL650W+ fixture?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this kit is designed for the GL1000W+ only. While the Jnicon M19 connector type is the same across Treegers GL+ fixtures, the GL1000W+ kit includes two power cables for the dual power input configuration of that specific driver. Using it on a GL650W+ is not supported. The GL650W+ has its own dedicated extension kit.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo all three cables need to be installed, or can I just use the power cables?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eAll three cables must be installed together. If you extend the two power connections but leave the original dimming cable in place, the dimming cable becomes the limiting factor on how far the driver can be positioned. For the full 3-metre remote driver setup, all three extensions are required.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I chain two kits to get 6 metres of distance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — 3 metres is the maximum rated distance for this kit. Chaining two kits is not supported by Treegers, is not covered under warranty, and risks voltage drop on the power cables at the combined length. If your installation genuinely requires more than 3 metres of driver clearance, contact The Grow Guys before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes remote driver mounting affect performance or dimming response?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — both the power and dimming cables are rated and tested for 3 metres without voltage drop or signal degradation. The GL1000W+ fixture will operate at the same output and dimming response as it would with the stock cable lengths. No recalibration is needed after installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhere should I mount the driver once it is remotely positioned?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eUse the GL1000W+'s included driver support brackets to mount the driver on a tent wall, equipment rail, or adjacent structure. The driver should have clear airflow around it — do not mount it in an enclosed cabinet or against a surface that blocks all sides. Outside the tent is ideal. Ensure the mounting point is load-rated for the driver weight and that the cable runs are free of tension and pinch points.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eGet the 1000W Driver Out of the Tent.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eThree cables, 3 metres, no heat compromise. Questions about your GL1000W+ installation or driver positioning? The Grow Guys team has you covered.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt(51338847519018, 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51338847519018,"sku":"TRG-ACC-EXT-GL1000","price":94.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-GL1000W-Driver-Extension-Kit-3m-Power-and-Dimming-Cable-Set.webp?v=1774917926","url":"https:\/\/www.thegrowguys.com.au\/products\/treegers-gl1000w-plus-driver-extension-kit","provider":"The Grow Guys","version":"1.0","type":"link"}