{"product_id":"treegers-gl650w-plus-driver-extension-kit","title":"Treegers GL650W+ Driver Extension Kit — 3m Power and Dimming Cable Set","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n  \u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003e\n    The GL650W+ driver mounts remotely by design — but the standard cabling that ships with the fixture only gets you so far. If your room layout means the driver needs to sit more than arm's reach from the fixture frame, this kit is what you need. Two 3-metre extension cables — one for power, one for dimming — that replace the stock connections and let you position the GL650W+ driver up to 3 metres away from the bars without any voltage drop or signal loss. Nothing more, nothing less.\n  \u003c\/p\u003e\n\n  \u003c!-- Benefit Cards --\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e3 Metres of Driver Clearance\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eMount the GL650W+ driver up to 3 metres from the fixture frame — on a wall, outside the tent, or on an adjacent rack — without power or signal loss.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eTwo Cables Included\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eOne power extension cable and one dimming extension cable — both required for full remote driver operation, both in the kit.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eIP67 Rated\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eBoth cables carry IP67 protection — fully sealed against moisture and dust, built to survive the conditions of a working grow room.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eNo Voltage Drop\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eRated at 300V\/600V and 20A\/10A respectively. Designed specifically for the GL650W+ driver load — no derating, no compromise.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eJnicon M19 Connectors\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eSelf-locking Jnicon connectors match the GL650W+ driver and frame ports exactly. Click in, lock, done.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e2-Year Warranty\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eUL-certified cables backed by Treegers' 2-year accessory warranty.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tech Specs --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eTech Specs\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; margin-bottom: 2rem; font-size: 0.95rem;\"\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e TDEK001\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eEAN \/ GTIN:\u003c\/strong\u003e 9309001188085\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GL650W+ fixtures with Jnicon M19 3-pin connector\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Jnicon 53-100331-02 \/ 53-200311-02 (power); Jnicon 54-100331-02 \/ 54-200311-02 (dimming)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Power Cable:\u003c\/strong\u003e 300V \/ 20A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eVoltage \/ Current — Dimming Cable:\u003c\/strong\u003e 600V \/ 10A\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 metres each\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600g (power cable); 200g (dimming cable)\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL2238 E500203\u003c\/div\u003e\n    \u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 Years\u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- What's in the Box --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Power Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Replaces the stock power connection between the GL650W+ driver and fixture frame.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n      \u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003e1x Driver Dimming Extension Cable — 3m\u003c\/strong\u003e\n      \u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eJnicon M19 connector. Extends the dimming signal connection from the driver to the fixture without signal degradation.\u003c\/span\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Tip Box --\u003e\n  \u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem;\"\u003e\n    \u003cstrong style=\"color: #e65100; display: block; margin-bottom: 0.5rem;\"\u003eGL650W+ Only — This Kit Is Not Universal\u003c\/strong\u003e\n    \u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n      \u003cli\u003eThis kit is designed exclusively for the GL650W+ fixture. It uses Jnicon M19 connectors specific to that driver and frame — it will not fit the GL1000W+ or any other Treegers model.\u003c\/li\u003e\n      \u003cli\u003eIf you are running a GL1000W+, there is a separate GL1000W+ Driver Extension Kit available. The GL1000W+ kit includes three cables (two power, one dimming) to match that fixture's driver configuration.\u003c\/li\u003e\n      \u003cli\u003eBoth the power and dimming cables in this kit must be installed together. Running only the power extension without replacing the dimming cable will leave the signal path on the shorter stock cable.\u003c\/li\u003e\n      \u003cli\u003eThe 3-metre extension is the maximum rated distance for this kit. Do not attempt to chain two kits together to gain 6 metres — this is not rated or supported by Treegers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eHow to Install the Driver Extension Kit\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower everything off before disconnecting anything\u003c\/strong\u003e — Disconnect the GL650W+ from mains power and allow it to fully cool before touching any cables or connections. Never work on a live fixture.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eDisconnect the stock power cable from the driver and frame\u003c\/strong\u003e — The original power cable between the GL650W+ driver and frame uses the same Jnicon M19 connector as this kit. Twist the locking ring to release, pull the connector clear, and set the stock cable aside.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eConnect the power extension cable in its place\u003c\/strong\u003e — Run the 3-metre power extension cable from the driver to the fixture frame. Push each Jnicon connector in firmly until the locking ring engages. Route the cable cleanly to avoid pinch points or excessive tension.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eReplace the dimming cable in the same way\u003c\/strong\u003e — Disconnect the stock dimming cable and connect the 3-metre dimming extension in its place, running it alongside the power cable to the same remote driver position. Lock both Jnicon connectors at each end.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eMount the driver at the desired remote location\u003c\/strong\u003e — Use the GL650W+ driver support brackets (included with the fixture) to secure the driver on a tent wall, equipment rail, or adjacent surface at the full 3-metre extension distance. Ensure it has airflow around it.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n      \u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003ePower on and verify normal operation\u003c\/strong\u003e — Reconnect mains power and confirm the fixture powers up correctly and responds to your controller or dimmer. If the fixture does not respond to dimming commands, check the dimming cable connections at both ends first.\u003c\/div\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- Pairs Well With --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003ePairs Well With\u003c\/h2\u003e\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\n    \u003ca href=\"\/products\/650w-led-by-treegers\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL650W+ LED Fixture\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThis kit exists for one fixture. If you're running the GL650W+ and need driver clearance, this is the only way to get it.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/growcast\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Growcast Controller\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eWith the driver remotely mounted, the Growcast connects directly to it and automates scheduling and PPFD control from your phone.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-precise-t-dimmer\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers Precise T Dimmer\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eIf you're using a T Dimmer rather than the Growcast, it connects to the remotely mounted driver the same way — no additional cables required.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/grow-tents\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrow Tents\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRemotely mounting the driver outside the tent reduces heat load inside the canopy — a meaningful benefit in a sealed environment at 650W.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/collections\/inline-exhaust-fans\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eInline and Exhaust Fans\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eMoving the driver out of the tent pairs well with dialling in your exhaust — less heat source inside means more efficient ventilation.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n    \u003ca href=\"\/products\/treegers-gl1000w-plus-driver-extension-kit\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\n      \u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eTreegers GL1000W+ Driver Extension Kit\u003c\/strong\u003e\n      \u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eRunning a GL1000W+ instead? The GL1000W+ has its own dedicated extension kit — not this one. Check the Treegers collection.\u003c\/p\u003e\n    \u003c\/a\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- FAQ --\u003e\n  \u003ch2 style=\"font-size: 1.1rem; font-weight: 700; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv style=\"margin-bottom: 2rem;\"\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWill this kit work with the GL1000W+ or GL420W?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — this kit is designed exclusively for the GL650W+. It uses Jnicon M19 connectors specific to the GL650W+ driver configuration and will not fit the GL1000W+, GL420W, or GL300W. The GL1000W+ has its own separate extension kit. The GL420W and GL300W have integrated drivers and do not support remote driver mounting.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need to install both cables, or can I just use the power cable?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eBoth cables must be installed together. The power cable extends the electrical supply between driver and fixture; the dimming cable extends the control signal. If you only extend the power connection and leave the stock dimming cable in place, the dimming cable becomes the limiting factor on how far the driver can be positioned. For a full 3-metre remote driver setup, both cables are required.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eCan I chain two kits together to get 6 metres of distance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — 3 metres is the maximum rated distance for this kit. Chaining two kits is not supported by Treegers, is not covered under warranty, and may result in voltage drop on the power cable or signal degradation on the dimming connection. If your installation requires more than 3 metres of driver clearance, contact The Grow Guys to discuss alternatives before purchasing.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eWhy would I want to mount the driver remotely?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eThe GL650W+ driver generates heat during operation. Mounting it outside the grow tent or away from the canopy keeps that heat source outside the growing environment, which reduces the total thermal load your exhaust system needs to manage. It also makes the driver more accessible for inspection and maintenance without disturbing the canopy or opening the tent. For tightly managed grow rooms at 650W, remote driver mounting is worth the $58 to get the heat out.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\n      \u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes this kit affect dimming performance?\u003c\/summary\u003e\n      \u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo — the dimming extension cable is rated and tested for use at 3 metres without signal loss. Your T Dimmer, Growcast, or universal controller will communicate with the driver exactly as it would with the stock cabling. No recalibration or adjustment is needed after installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003c!-- CTA Block --\u003e\n  \u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n    \u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eGet Your Driver Out of the Tent.\u003c\/h2\u003e\n    \u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eLess heat inside the canopy. More flexibility in your room layout. Two cables, 3 metres, done. Questions about your GL650W+ installation? The Grow Guys team is here.\u003c\/p\u003e\n    \u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n      \u003cbutton id=\"btn-add-to-cart\" onclick=\"\n        var btn = document.getElementById('btn-add-to-cart');\n        fetch('\/cart\/add.js', {\n          method: 'POST',\n          headers: {'Content-Type': 'application\/json'},\n          body: JSON.stringify({id: parseInt(51338813931818, 10), quantity: 1})\n        }).then(function(r){ return r.json(); }).then(function(d){\n          if (d.status \u0026amp;\u0026amp; d.status !== 200) { throw new Error(d.description); }\n          btn.textContent = 'Added to Cart';\n          btn.style.background = '#388e3c';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2000);\n        }).catch(function(){\n          btn.textContent = 'Error — Try Again';\n          btn.style.background = '#c0392b';\n          setTimeout(function(){ btn.textContent = 'Add to Cart'; btn.style.background = '#4caf50'; }, 2500);\n        });\n      \" style=\"background: #4caf50 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n      \u003ca href=\"\/collections\/treegers\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Treegers\u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Treegers","offers":[{"title":"Default Title","offer_id":51338813931818,"sku":"TRG-ACC-EXT-GL650","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/Treegers-GL650W-Driver-Extension-Kit-3m-Power-and-Dimming-Cable-Set.webp?v=1774917921","url":"https:\/\/www.thegrowguys.com.au\/products\/treegers-gl650w-plus-driver-extension-kit","provider":"The Grow Guys","version":"1.0","type":"link"}