{"product_id":"vivosun-4-in-1-co2-sensor-growhub-e42a-plus","title":"4-in-1 Sensor by VIVOSUN — CO₂, Temperature, Humidity \u0026 Light Sensor for the GrowHub E42A+","description":"\u003cdiv style=\"font-family: 'Helvetica Neue', Arial, sans-serif; max-width: 860px; margin: 0 auto; color: #1a1a1a;\"\u003e\n\n\u003cp style=\"font-size: 1.05rem; line-height: 1.7; margin-bottom: 1.5rem;\"\u003eTemperature and humidity only tell you half of what the canopy is doing. The 4-in-1 Sensor by VIVOSUN adds CO₂ and light on\/off detection to the readings your GrowHub E42A+ already takes, so the controller can see when CO₂ is running low in a closed-up tent, or when a light has not switched when it should. It swaps in for the standard probe on the controller's 2.5mm sensor port, hangs on a 3m cable, and reads CO₂ from 0 to 40,000 ppm with an NDIR sensor. It suits growers already running an E42A+ who want CO₂ on the screen and in their fan or CO₂ triggers. The honest limits: it works with the E42A+ only, the light reading is on or off and not a PAR or lux figure, and it measures CO₂ without adding any.\u003c\/p\u003e\n\n\u003cdiv style=\"background: #fff3e0; border-left: 4px solid #e65100; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 2rem; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cstrong style=\"color: #e65100;\"\u003eE42A+ only.\u003c\/strong\u003e This sensor plugs into the GrowHub E42A+ and takes the place of its standard temperature and humidity probe. It does not work with the GrowHub E42 or E42A.\u003c\/div\u003e\n\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem; margin-bottom: 2rem;\"\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eCO₂ on the controller screen\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eAn NDIR sensor reads CO₂ from 0 to 40,000 ppm and sends it to the E42A+, where you can set triggers for your exhaust fan or CO₂ equipment.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eConfirms the light actually switched\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eLight detection reports on or off, so you can check whether the tent went dark or lit up on schedule. It is not a PAR or lux reading.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eReplaces the probe, no extra ports\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eIt plugs into the same 2.5mm sensor port as the standard E42A+ probe and carries temperature, humidity, CO₂ and light down one cable.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eSwiss temperature and humidity chip\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eTemperature to ±0.8°C and humidity to ±6% RH feed the controller's VPD reading, so your fan triggers work from canopy conditions.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eMade to hang at the canopy\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eA 3m cable reaches from the controller to the plants, and the white housing is there to reduce heat absorption under the light.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #f4f9f4; border-left: 4px solid #2e5e2e; padding: 1rem 1.2rem; border-radius: 6px;\"\u003e\n\u003cstrong style=\"display: block; margin-bottom: 0.3rem; color: #2e5e2e;\"\u003eCalibrate it from the controller\u003c\/strong\u003e\u003cspan style=\"font-size: 0.9rem; color: #444;\"\u003eCO₂ calibration runs from the E42A+ itself in a few minutes, so you can keep the reading honest month to month.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdetails style=\"margin-bottom: 2rem;\"\u003e\n\u003csummary style=\"cursor: pointer; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003e\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; margin: 0; display: inline;\"\u003eSpecifications\u003c\/h2\u003e\u003c\/summary\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 0.5rem 2rem; font-size: 0.95rem;\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e VIVOSUN\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VSE-CO2S4\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMeasures:\u003c\/strong\u003e Temperature, humidity, CO₂ and light on\/off\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCompatible controller:\u003c\/strong\u003e GrowHub E42A+ only\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCO₂ sensor:\u003c\/strong\u003e NDIR\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCO₂ range:\u003c\/strong\u003e 0–40,000 ppm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCO₂ accuracy:\u003c\/strong\u003e 50 ppm ±5%\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -10 to 60°C\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTemperature accuracy:\u003c\/strong\u003e ±0.8°C\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHumidity range:\u003c\/strong\u003e 0–100% RH\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHumidity accuracy:\u003c\/strong\u003e ±6% RH\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLight detection:\u003c\/strong\u003e On\/off only\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e Temperature and humidity 200ms, CO₂ 60s, light 120ms\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eOperating humidity:\u003c\/strong\u003e Up to 90% RH\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e 2.5mm jack\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 3m (118in)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 45 × 45 × 13.5mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 × 4-in-1 sensor with attached cable\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years (manufacturer)\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 2rem;\"\u003e\n\u003csummary style=\"cursor: pointer; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003e\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; margin: 0; display: inline;\"\u003eGrower's Tip\u003c\/h2\u003e\u003c\/summary\u003e\n\u003cdiv style=\"background: #fff8e1; border-left: 4px solid #f9a825; padding: 1rem 1.3rem; border-radius: 6px; margin-bottom: 0;\"\u003e\n\u003cul style=\"margin: 0 0 0 1.2rem; padding: 0; font-size: 0.93rem; line-height: 1.7;\"\u003e\n\u003cli\u003eHang it about 10cm above the canopy, which is where VIVOSUN's manual puts it, and lift it as the plants grow.\u003c\/li\u003e\n\u003cli\u003eKeep it out of the direct airstream of your fans and away from any CO₂ outlet, so it reads the air the plants are sitting in.\u003c\/li\u003e\n\u003cli\u003eCalibrate the CO₂ reading once a month. VIVOSUN's method is to take the sensor outdoors to a well-ventilated spot, let it settle for 3 minutes, then run CO₂ calibration from the controller.\u003c\/li\u003e\n\u003cli\u003eVIVOSUN's manual lists reference CO₂ levels of 400 ppm at germination, 600 for seedlings, 800 in veg and 1000 in flower. Treat them as a starting point: the right level is plant-specific and depends on your light and temperature.\u003c\/li\u003e\n\u003cli\u003eThe light reading only tells you on or off. To measure intensity at the canopy you still need a \u003ca href=\"\/collections\/par-meters\" style=\"color: #2e5e2e; font-weight: 600;\"\u003ePAR meter\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKeep it dry. VIVOSUN rates it for up to 90% RH and warns against excessive moisture, so move it out of the way before foliar spraying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 2rem;\"\u003e\n\u003csummary style=\"cursor: pointer; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003e\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; margin: 0; display: inline;\"\u003eHow To Set It Up\u003c\/h2\u003e\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e1\u003c\/span\u003e\u003cspan\u003eCheck your controller is the GrowHub E42A+ (model GH-E42AP). The sensor does not work with the E42 or E42A.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e2\u003c\/span\u003e\u003cspan\u003eUnplug the standard temperature and humidity probe from the controller's 2.5mm sensor port and plug the 4-in-1 Sensor in its place.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e3\u003c\/span\u003e\u003cspan\u003eRun the cable into the tent and hang the sensor about 10cm above the canopy, clear of fan airflow.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e4\u003c\/span\u003e\u003cspan\u003eCalibrate CO₂ before you rely on it: take the sensor outdoors to a well-ventilated spot, let it settle for 3 minutes, then run CO₂ calibration from the E42A+.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; border-bottom: 1px solid #edf3ed; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e5\u003c\/span\u003e\u003cspan\u003eCheck temperature, humidity, CO₂ and light status are all showing on the controller and in the VIVOSUN app.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: flex-start; gap: 14px; padding: 12px 0; font-size: 0.93rem; line-height: 1.6;\"\u003e\n\u003cspan style=\"background: #2e5e2e; color: #fff; font-weight: 700; font-size: 0.85rem; min-width: 28px; height: 28px; border-radius: 50%; display: flex; align-items: center; justify-content: center; flex-shrink: 0; margin-top: 1px;\"\u003e6\u003c\/span\u003e\u003cspan\u003eSet your triggers on the E42A+ for the fan or CO₂ equipment you run, watch a full day and night, then fine-tune. Repeat the calibration monthly.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 2rem;\"\u003e\n\u003csummary style=\"cursor: pointer; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003e\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; margin: 0; display: inline;\"\u003ePairs Well With\u003c\/h2\u003e\u003c\/summary\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(200px, 1fr)); gap: 1rem;\"\u003e\n\u003ca href=\"\/products\/vivosun-growhub-e42a-plus-grow-controller\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eGrowHub E42A+ Controller\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eThe controller this sensor is made for. Without an E42A+ the sensor has nothing to plug into.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/aerostream-h19-humidifier-by-vivosun\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAeroStream H19 Humidifier\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eAdds moisture when the sensor shows VPD climbing, and runs in the same VIVOSUN app.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/aerodrain-d12-smart-dehumidifier-by-vivosun\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAeroDrain D12 Dehumidifier\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003ePulls up to 12L a day out of the tent when you are keeping it closed up to hold CO₂ in.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/products\/vivosun-aeroflux-smart-grow-tent-heater-700w\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eAeroFlux 700W Heater\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eHolds night temperatures up so the readings you are tracking stay inside your targets.\u003c\/p\u003e\u003c\/a\u003e\n\u003ca href=\"\/collections\/co2-controllers-monitors\" style=\"text-decoration: none; color: inherit; background: #f4f9f4; border: 1px solid #c8dfc8; padding: 1rem; border-radius: 6px; display: block;\"\u003e\u003cstrong style=\"color: #2e5e2e; display: block; margin-bottom: 0.3rem;\"\u003eCO2 Controllers\u003c\/strong\u003e\u003cp style=\"font-size: 0.85rem; margin: 0;\"\u003eStandalone CO₂ controllers and monitors for rooms that are not running a GrowHub.\u003c\/p\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom: 2rem;\"\u003e\n\u003csummary style=\"cursor: pointer; border-bottom: 2px solid #2e5e2e; padding-bottom: 0.4rem; margin-bottom: 1rem;\"\u003e\u003ch2 style=\"font-size: 1.1rem; font-weight: 700; margin: 0; display: inline;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\u003c\/summary\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it work with the GrowHub E42 or E42A?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. VIVOSUN lists the GrowHub E42A+ as the only compatible controller. If you are not sure which one you have, the E42A+ has a 4.3\" colour screen and the model number GH-E42AP.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it replace the probe that came with my E42A+?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. It uses the same 2.5mm sensor port, so the standard probe comes out and this goes in. You keep temperature and humidity and gain CO₂ and light detection.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it measure light intensity?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It detects whether the light is on or off. It does not give a PAR, PPFD or lux figure, so use a PAR meter to set light height and dimming.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it add CO₂ to the tent?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. It measures CO₂ and reports it to the controller. Raising CO₂ takes a separate CO₂ source, and lowering it takes fresh air from your exhaust fan.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDo I need to calibrate it?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. VIVOSUN recommends calibrating CO₂ once a month: take the sensor outdoors to a well-ventilated spot, let it settle for 3 minutes, then run CO₂ calibration from the E42A+ controller.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eIs it waterproof?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eNo. VIVOSUN's manual warns against excessive moisture and rates it for operation up to 90% RH. Keep it clear of misting and foliar sprays.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eHow accurate is it?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eVIVOSUN's published figures are ±0.8°C for temperature, ±6% RH for humidity and 50 ppm ±5% for CO₂.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 0.8rem; border: 1px solid #e0e0e0; border-radius: 6px; padding: 0.8rem 1rem;\"\u003e\u003csummary style=\"font-weight: 600; cursor: pointer;\"\u003eDoes it come with a warranty?\u003c\/summary\u003e\u003cp style=\"margin: 0.6rem 0 0; font-size: 0.93rem; line-height: 1.6;\"\u003eYes. It carries VIVOSUN's 2-year manufacturer warranty.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"background: #1c3a1c; color: #fff; padding: 2rem; border-radius: 10px; text-align: center; margin-top: 2rem;\"\u003e\n\u003ch2 style=\"color: #fff !important; margin: 0 0 0.5rem; font-size: 1.3rem;\"\u003eSee CO₂ At The Canopy\u003c\/h2\u003e\n\u003cp style=\"color: #aed1ae !important; margin: 0 0 1.5rem; font-size: 0.95rem;\"\u003eAdd CO₂ and light sensing to your GrowHub E42A+. Free shipping over $499*.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 1rem; flex-wrap: wrap;\"\u003e\n\u003cbutton id=\"btn-add-to-cart\" style=\"background: #b67317 !important; color: #fff !important; padding: 0.85rem 2rem !important; border: none !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 700 !important; cursor: pointer !important;\"\u003eAdd to Cart\u003c\/button\u003e\n\u003ca href=\"\/collections\/grow-room-monitors\" style=\"background: transparent !important; color: #fff !important; padding: 0.85rem 2rem !important; border: 2px solid #fff !important; border-radius: 6px !important; font-size: 1rem !important; font-weight: 600 !important; text-decoration: none !important; display: inline-block !important;\"\u003eShop All Grow Room Monitors\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript\u003e\ndocument.addEventListener('DOMContentLoaded', function() {\n  var btn = document.getElementById('btn-add-to-cart');\n  if (!btn) return;\n  btn.addEventListener('click', function() {\n    fetch('\/cart\/add.js', {\n      method: 'POST',\n      headers: {'Content-Type': 'application\/json'},\n      body: JSON.stringify({id: parseInt('53680205857066', 10), quantity: 1})\n    }).then(function(response) {\n      return response.json();\n    }).then(function(data) {\n      if (data.status \u0026\u0026 data.status !== 200) { throw new Error(data.description); }\n      btn.textContent = 'Added to Cart';\n      btn.style.background = '#2e5e2e';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2000);\n    }).catch(function() {\n      btn.textContent = 'Error — Try Again';\n      btn.style.background = '#c0392b';\n      setTimeout(function() {\n        btn.textContent = 'Add to Cart';\n        btn.style.background = '#b67317';\n      }, 2500);\n    });\n  });\n});\n\u003c\/script\u003e","brand":"VIVOSUN","offers":[{"title":"Default Title","offer_id":53680205857066,"sku":"VSN-SENSOR-CO2S4","price":84.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/1573\/3290\/files\/vivosun-4-in-1-sensor-co2s4-01.png?v=1795169609","url":"https:\/\/www.thegrowguys.com.au\/products\/vivosun-4-in-1-co2-sensor-growhub-e42a-plus","provider":"The Grow Guys","version":"1.0","type":"link"}