AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan
AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan

AeroWave D4 Clip Fan by Vivosun — 4" Grow Tent Circulation Fan

SG-S1793

Regular price$30.00
/
Shipping calculated at checkout.

Size
  • Low stock - 7 items left
  • Backordered, shipping soon
  • Free shipping on orders over $499*

The Vivosun AeroWave D4 is a 4" clip fan built for grow tents and indoor spaces that need steady air movement across the canopy without eating into hanging height or budget. It clips onto tent poles or shelving, runs quietly across multiple speeds, and keeps air circulating to strengthen stems, prevent hot spots, and reduce the conditions that let mould and pests take hold. A simple, no-fuss piece of any ventilation setup.

Clip mount Strong clip attaches to tent poles, shelving uprights, or frame bars — no floor space or extra hardware needed.
Multiple speeds Dial in airflow — low for gentle stem strengthening, higher for canopy movement and heat dispersal during peak conditions.
360° head adjustment Adjustable head points airflow exactly where it's needed — across the canopy, along the floor, or at a hotspot.
Compact 4" profile Small enough to fit inside tight grow spaces and smaller tents without blocking light or eating hanging real estate.

Specifications

Fan diameter
4" (approx. 100mm)
Mount type
Clip — fits tent poles and shelving
Head adjustment
360° adjustable
Speed settings
Multiple speeds
Power
Mains powered (AU plug)
Pole compatibility
Standard 19mm and 22mm grow tent poles
Suitable for
Grow tents, propagation, drying rooms, small indoor spaces
Grow Guys tip
  • Aim for gentle leaf flutter across the canopy — not a sideways blast. That's the airflow level that builds stem strength without wind stress.
  • Position at canopy height angled slightly upward. Maximises circulation without driving cold air straight onto the root zone.
  • Run 24/7 through both light and dark. Stagnant air during the dark period is where mould pressure peaks.
  • For tents 1.0 x 1.0m or larger, run two D4s positioned to create a circular airflow pattern across the canopy — even coverage beats a single stronger fan.

How to set it up

1
Choose the mount point. Identify a tent pole, shelf upright, or frame bar at the right height to direct airflow across your canopy.
2
Clip it on. Open the clip, position on the pole or bar, and tighten. The clip should grip firmly without forcing.
3
Aim the head. Rotate the fan head to push air across the canopy — not straight down at the substrate, not straight up at the lights.
4
Set the speed. Start on the lowest setting and watch the leaf movement. Increase until leaves flutter gently — that's your target.
5
Run continuously. Leave it on through both light and dark periods. Stagnant air pockets are where problems start.

Pairs well with

FAQ

Will the clip fit standard grow tent poles?

Yes. The clip is designed for the 19mm and 22mm pole diameters used in most grow tents. Check your pole if it falls outside that range.

Should I run the clip fan during the dark period?

Yes. Stagnant air in a dark, humid tent is exactly where mould starts. Keep the fan running 24/7 unless an environment controller has a specific reason to pause it.

Is one D4 enough for a standard grow tent?

For 0.6 x 0.6m or 0.8 x 0.8m tents, one D4 is generally enough. For 1.0 x 1.0m and larger, two D4s positioned to create a circular airflow pattern across the canopy will give better coverage than a single fan.

Does this fan replace an inline exhaust fan?

No. A clip fan handles internal circulation only — it does not exchange air with outside or filter odours. An inline exhaust fan and carbon filter are still needed for proper air exchange and odour control.

Can it be used outside a grow tent?

Yes. The clip works on any bar, shelf, or ledge it can grip. Equally useful in seedling rooms, propagation areas, drying rooms, or any small indoor space that needs air movement.

Keep the air moving, keep the mould out

Free shipping on orders over $499*. Ships Australia-wide from Tasmania.

Shop Clip Fans

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed