152mm Oscillating Clip Fan by Bloom Works — 20W 2-Speed Grow Tent Circulation Fan
BW-FAN-CLIP-152
Earn 44 points with this purchase
A 152mm, 20W oscillating clip fan that clamps straight onto a tent pole and sweeps air across the canopy. Two speeds, cheap enough to run around the clock.
- Handpicked by growers
- Ships today
- Real advice, real people
- 6,736+ high-yielding customers
- 30-day returns*
- Free shipping over $499*
- Low stock - 9 items left
- Backordered, shipping soon
Pairs well with
Still air is where most tent problems start: heat pools under the light, humidity hangs in the canopy and stems stay soft. The Bloom Works 152mm Oscillating Clip Fan is a 20W, two-speed circulation fan that clamps onto a tent pole or frame and sweeps air back and forth across your plants, so the whole canopy gets movement instead of one spot getting blasted. It suits grow tents, propagation setups and shelving, and it is priced as an everyday workhorse. One honest limit: it moves air around inside the space, it does not replace it. You still need an exhaust fan to pull hot, humid air out of the tent.
Specifications
Grower's Tip
- Aim it across the canopy, not straight down onto it. You want the leaves moving gently, not flattened or flapping.
- Mount it on a corner pole a little above the canopy and let it sweep across. Move it up the pole as the plants grow.
- Pair it with an exhaust fan. The clip fan mixes the air inside the tent and the exhaust fan pulls the hot, humid air out.
- Keep the clamp clear of the light and its cables, and run the power cord down the pole so it cannot reach the canopy or a water tray.
- In a bigger tent, two fans at different heights do a better job than one fan flat out on high.
- Unplug it and wipe the dust off the grille and blades every few weeks. A dusty fan moves less air.
How To Set It Up
Pairs Well With
Tells you whether the fan and your exhaust are actually keeping temperature and humidity where you want them.
VIVOSUN AeroZesh Ventilation KitInline fan, carbon filter and controller in one box. The clip fan mixes the air, the kit takes it out of the tent.
430mm Oscillating Wall Fan by Bloom WorksGrowing in a room rather than a tent? The 50W, 3-speed wall fan moves a lot more air.
Clip Fans & Air CirculationClip-on and oscillating fans for keeping air moving in any size tent.
Frequently Asked Questions
Will it clip onto my grow tent poles?
Yes. It is built to clamp onto grow tent poles and frames. Bloom Works does not publish the clamp's size range, so if your poles are unusually thick, ask us before you order.
Does it oscillate?
Yes. The head swings side to side to spread the airflow across the canopy instead of hitting one spot.
Can I run it 24 hours a day?
Yes. Bloom Works describes it as economical to run continuously, and at 20W it uses about half a kilowatt-hour a day.
Does it replace an exhaust fan?
No. A clip fan circulates the air already in the tent. You still need an exhaust fan to remove hot, humid air and bring fresh air in.
Should the fan blow straight onto my plants?
No. Aim it across the canopy so the leaves move gently. Air blasting straight down onto plants can flatten and stress the leaves.
How many speeds does it have?
Two, low and high. Low suits young plants and small spaces, high suits a full canopy.
Is it water resistant?
No. There is no water resistance rating published for this fan, so keep it clear of sprays, drippers and reservoirs.
Keep The Air Moving
A 20W oscillating clip fan that earns its spot in any tent. Free shipping over $499*.