VIVOSUN AeroLab P30 pH meter pen with backlit display and clear probe cap
VIVOSUN AeroLab P30 pH meter held in a beaker of water, 0 to 14 pH range and ±0.01 pH accuracy
VIVOSUN AeroLab P30 pH meter electrode with glass membrane sensor, double junction and ATC
VIVOSUN AeroLab P30 pH meter one-touch calibration steps with buffer powder and distilled water
VIVOSUN AeroLab P30 pH meter backlit LCD, IP67 rating, replaceable electrode and auto power-off
VIVOSUN AeroLab P30 pH meter uses in wick, DWC, ebb and flow, drip, NFT and aeroponic systems
VIVOSUN AeroLab P30 pH meter specifications, dimensions and box contents with buffer powders and cup

AeroLab P30 pH Meter by VIVOSUN — ±0.01 pH Pen with Replaceable Probe and ATC

VSN-METER-PH-P30

Regular price$109.95
/
Tax included. Shipping calculated at checkout.

Earn 109 points with this purchase

A ±0.01 pH pen with automatic temperature compensation, three-point calibration and a replaceable probe. Buffer powders and a measuring cup are in the box.


  • Handpicked by growers
  • Ships today
  • Real advice, real people
  • 6,779+ high-yielding customers
  • 30-day returns*
  • Free shipping over $499*
  • Low stock - 2 items left
  • Backordered, shipping soon

Pairs well with

A basic pH pen goes in the bin when its probe wears out. The AeroLab P30 by VIVOSUN reads 0.00 to 14.00 pH to ±0.01, corrects for solution temperature automatically, and takes a replaceable probe, so a worn electrode costs you a probe and not a whole meter. It suits growers checking nutrient mix and runoff who want a tighter reading than an entry-level pen without paying for a bench meter. It calibrates at one, two or three points, holds the reading on a backlit screen, and comes with buffer powders to get you started. The honest limits: it reads pH and temperature only, so you still need an EC meter, and like every pH pen the probe has to be kept moist and calibrated or the numbers drift.

Reads to two decimals±0.01 pH accuracy at 0.01 resolution across the full 0.00 to 14.00 range, so small shifts in your reservoir show up before they become a problem.
A probe you can replacepH probes are a consumable, and VIVOSUN puts typical probe life at about a year. On the P30 the probe unscrews and a new one goes in.
Temperature compensatedAutomatic temperature compensation corrects the pH reading as the solution warms or cools, and the screen shows the temperature alongside it.
Calibration that checks itselfOne, two or three point calibration recognises the buffer, waits for a stable reading, and shows a smiley or sad face to tell you whether the probe is still healthy.
Holds the reading for youAuto or manual hold locks the number on the backlit screen, so you can lift the pen out of the tank and read it properly.
Buffers in the boxTwo sachets each of pH 4.01, 6.86 and 9.18 buffer powder and a 50ml cup come with it, so you can calibrate the day it arrives.

Specifications

Brand: VIVOSUN
Model: AeroLab P30
pH range: 0.00–14.00 pH
pH resolution: 0.01 pH
pH accuracy: ±0.01 pH
Temperature range: 0–50°C
Temperature resolution: 0.1°C
Temperature accuracy: ±0.5°C
Temperature compensation: Automatic (ATC)
Calibration: 1, 2 or 3 point, automatic buffer recognition
Buffer standards: NIST (4.01 / 6.86 / 9.18) or USA (4.00 / 7.00 / 10.01)
Probe: Replaceable
Protection rating: IP67
Display: Backlit LCD
Hold: Automatic and manual
Auto power off: Adjustable, 5 to 20 minutes
Power: 4 × AAA batteries (included)
Dimensions: 42 × 42 × 191mm
Weight: 120g
In the box: pH meter, 4 × AAA batteries, 2 × pH 4.01, 2 × pH 6.86 and 2 × pH 9.18 buffer powders, 50ml measuring cup
Warranty: 2 years (manufacturer)

Grower's Tip

  • Never store the probe in plain water, whether tap, RO or distilled. Keep the cap on and the sponge inside it moist with a few drops of KCl storage solution.
  • It ships set to Fahrenheit and the NIST buffer set. Change to Celsius in the settings menu, and switch the buffer standard to USA if you calibrate with bottled 4.0 and 7.0 buffers.
  • Mix each buffer sachet into 250ml of distilled water, which is five fills of the included cup. Use a clean container for each buffer.
  • For readings below pH 7, VIVOSUN's two-point calibration is 6.86 first, then 4.01. Do not switch the pen off between points or you start again.
  • Dip the probe at least 25mm into the sample but do not dunk the whole pen. Stir gently, then let it sit until the stability icon stops flashing.
  • Very pure water is slow to read. VIVOSUN says RO, distilled and tap water can take 1 to 5 minutes to settle.
  • Rinse the probe with distilled water before and after every use, and never wipe the glass with anything hard.
  • The screen is backlit. If you are testing during the dark period, do it outside the grow space so the screen is not a light leak.

How To Use It

1Fit the four AAA batteries. With the pen off, long press the power button to open the settings menu and set the temperature unit to Celsius.
2Mix the pH 6.86 buffer: one sachet into 250ml of distilled water, stirred until it has fully dissolved.
3Turn the pen on and long press CAL. Rinse the probe with distilled water, stand it in the 6.86 buffer, stir gently and let it sit. When the reading is stable, press CAL. A smiley face confirms the point.
4Without switching off, rinse the probe and repeat with the 4.01 buffer for a two-point calibration, then the 9.18 buffer if you want three points. After two points, press the power button to go back to measuring.
5To measure, rinse the probe, dip it at least 25mm into your solution, stir gently and wait for the stability icon to go solid. Press CAL to hold the reading.
6Rinse the probe with distilled water, switch the pen off and put the cap back on with its sponge still moist.

Pairs Well With

Frequently Asked Questions

Does it come with calibration solution?

Yes. The box includes two sachets each of pH 4.01, 6.86 and 9.18 buffer powder and a 50ml measuring cup. Each sachet mixes into 250ml of distilled water, which you supply.

Can I calibrate it with bottled pH 4.0 and 7.0 buffers?

Yes. Change the buffer standard in the settings menu from NIST to USA, which uses 4.00, 7.00 and 10.01.

Is the probe replaceable?

Yes. The probe unscrews and a new one pushes onto the pins. VIVOSUN puts typical probe life at about a year and says to use only its own probes, soak a new one in KCl solution for at least 5 minutes, then calibrate.

Is it waterproof?

Yes, it is rated IP67. VIVOSUN's manual still says not to fully submerge the pen, so dip the probe end and keep the body out of the tank.

Does it measure EC or TDS?

No. It reads pH and temperature. You need a separate EC meter for nutrient strength.

Can I push it straight into soil or coco?

No. VIVOSUN says it is for measuring liquids only. Test your feed or your runoff, not the medium itself.

Does it show temperature in Celsius?

Yes. It ships set to Fahrenheit, and you change it to Celsius in the settings menu.

Does it come with a warranty?

Yes. It carries VIVOSUN's 2-year manufacturer warranty.

Read pH To Two Decimals

A ±0.01 pH pen with a probe you can replace. Free shipping over $499*.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Growers First, Retailers Second

Welcome to The Grow Guys

We built The Grow Guys from the soil up — well, coco and perlite. Before we sold gear, we bought it, ran it, and learned the hard way what's worth the money and what ends up in the shed. That's the filter everything on our shelves passes through. No sales scripts, no rebadged junk, no telling you what you want to hear. Just gear we'd run ourselves and advice from people who actually grow. Chasing higher yields, tighter flowers, or your first harvest? You're in the right place.

Meet The Grow Guys

FAQs

How fast do you ship?

Order by 2pm and it ships the same business day from Invermay, Tasmania.

How much is shipping?

Calculated at checkout by weight and destination. Free shipping over $499*.

Is the packaging discreet?

Plain packaging, no branding. No one knows what's in your box.

What's your returns policy?

30-day change-of-mind returns on unopened, unused products. A 10% restocking fee applies and return shipping is at your cost.

Can I get advice before buying?

Call, email, or walk into the Invermay shop. You'll get a grower on the other end, not a script.

Do you have a physical store?

Unit 10/110 Gleadow Street, Invermay 7248. Mon–Fri 8:30am–5:30pm, Sat 9am–3pm.

Inside The Grow Guys hydroponics store in Invermay, Tasmania

Still got a question?

Talk to a grower, not a script

Tell us your space and what you want to grow. We'll point you to the gear that fits, and tell you what you can skip.

Call 0481 735 126

Mon–Fri 8:30am–5:30pm · Sat 9am–3pm

You may also like


Recently viewed