CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent
CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent

CLOUDLAB 642 by AC Infinity — 120×60×180cm 2000D Diamond Mylar Grow Tent

ACI-TENT-CL642-120X60

Regular price $390.00 Sale price$369.95 Save $20.05
/
Shipping calculated at checkout.

  • Low stock - 1 item left
  • Backordered, shipping soon
  • Free shipping on orders over $499*

The CLOUDLAB 642 is AC Infinity's 4x2 grow tent — 120 x 60 x 180cm of sealed, climate-controlled growing space in a footprint that tucks into a bedroom corner, garage bay, or basement alcove. 2000D oxford canvas backed by a 500G lightproof layer, 22mm steel poles rated to 113kg, reengineered diamond mylar lining, and an integrated controller mounting plate with a lightproof cable passthrough. Assemble it once and it stays put for years.

2000D Canvas, 500G Lightproof Layer Waterproof oxford canvas at 2000D thickness, backed by a dedicated 500G light-blocking layer and front zipper flaps. Two independent defences against light ingress, not one.
Reengineered Diamond Mylar Lab-tested with an Agilent UV-Vis-NIR Spectrophotometer for maximum light reflectivity. More of your light output lands back on the canopy instead of dying on the walls.
22mm Steel Poles, 113kg Rated Thicker than the 18mm poles used in most tents, with reinforced corner pieces. Rated to carry 113kg (250 lbs) of hanging equipment without flex or long-term sag.
Nine Duct Openings Four 4-inch, four 6-inch, and one 8-inch cinched port. Room for your extraction, intake, humidifier, and heater runs without cutting into the canvas or breaking the seal.
35 x 100cm Viewing Window A full-height window down the front panel — check the whole canopy top to bottom without unzipping and dumping your climate. Genuine SBS zippers throughout.
Controller Mounting Plate An integrated plate with a lightproof cable passthrough, purpose-built for AC Infinity controllers. No brackets, no taped-over holes, no compromised dark period.

Specifications

Model
CLOUDLAB 642 (AC-CBA642)
Imperial Size
4x2 (48 x 24 x 72 in)
Tent Dimensions
120 x 60 x 180 cm
Outer Canvas
2000D Oxford, waterproof
Lightproof Layer
500G
Inner Lining
Reengineered Diamond Mylar
Pole Material
22mm Steel, reinforced corners
Beam Weight Capacity
113 kg (250 lbs)
Hanging Bars
3
Duct Openings
4-inch (x4), 6-inch (x4), 8-inch (x1)
Viewing Window
35 x 100 cm
Rear Intake Window
35 x 15 cm
Side Intake Window
28 x 15 cm
Plant Capacity
2 plants in 19L (5 gal) pots
Zippers
Genuine SBS with front flaps
Included
Heavy-duty floor tray, detachable tool bag
Warranty
2 Years (AC Infinity)
UPC
819137021549
Is the CLOUDLAB 642 the right size for your grow?
  • AC Infinity rates this tent at 2 plants in 19L (5 gallon) pots. Drop to smaller containers and you will comfortably fit 3 to 4 — the rating is about pot footprint, not the tent's limits
  • The 120 x 60cm footprint is the narrow one. It suits a wall run, a closet, or a spare-room corner where a square 120 x 120 tent simply will not fit
  • 180cm internal height is workable for a full cycle but tight in late flower with tall varieties. Plan on topping, LST, or a SCROG net before you start, not after
  • Need more room? The CLOUDLAB 894 steps up to 240 x 120 x 200cm with 8 hanging bars and an 18-plant rating
  • Running an AC Infinity controller? The built-in mounting plate makes this the natural tent for it — no external brackets, no cable clutter

Setting Up Your CLOUDLAB 642

1
Pick your spot first. Allow at least 30cm clearance behind and to the sides for ducting runs and the door swing. The tent stands 180cm assembled — confirm your ceiling clears that plus whatever inline fan or ducting elbow sits above it.
2
Build the frame on the floor. Lay every pole out and identify it before you connect anything. The 22mm poles seat firmly — do not force a connection at an angle. Assemble the base flat, stand the structure upright, then slide the canvas over.
3
Hang your gear before you close up. Inline fan, carbon filter, and grow light all go in while the tent is fully open. Threading hangers through a zipped canvas is the single biggest time-waster in a first build. Distribute weight across the 3 bars rather than loading one point.
4
Mount the controller and route cables. Fix your controller to the integrated plate on the frame — outside the canopy, away from humidity. Feed every power and sensor cable through the lightproof passthrough before the canvas gets zipped shut.
5
Light leak check before anything goes in. Zip all flaps and the front zipper cover fully closed, kill the room lights, and get inside to look for ingress. Cinch every duct port you are not using all the way shut, and check the floor tray corners.

Pairs Well With

Frequently Asked Questions

Can I fit 4 plants in the CLOUDLAB 642?

Yes, in smaller pots. AC Infinity's official rating is 2 plants in 19L (5 gallon) containers, which is the honest figure for full-size plants with proper canopy spread. Drop to 11L pots or run a SOG-style setup with smaller containers and 3 to 4 plants fits the 120 x 60cm footprint comfortably. The constraint is pot diameter, not the tent.

Do I need a 6-inch inline fan for this tent?

No, not usually. A 4-inch inline fan is the right match for a 120 x 60 x 180cm space running a moderate light. Step up to 6-inch if you are pushing a high-wattage fixture, running warm ambient temperatures, or supplementing CO2. The tent gives you four ports of each size, so you can change your mind later without buying a new tent.

Can I run a full veg and flower cycle at 180cm height?

Yes. 180cm handles most varieties through a complete cycle once you account for pot height and light hanging distance. Budget roughly 30cm for the pot and 30-40cm for the light, which leaves you a workable canopy zone. Tall or heavy-stretching varieties will get tight in the last few weeks — topping, LST, or a SCROG net solves it if you plan for it early.

Is 2000D canvas actually better than cheaper tents?

Yes. The denier rating reflects the density of the canvas weave, and 2000D is substantially thicker and more tear-resistant than the 600D or 1680D used in budget and mid-range tents. On the CLOUDLAB it is paired with a separate 500G lightproof layer and front zipper flaps, so light control does not depend on the canvas alone. It also holds up better to the structural stress of heavy hanging gear over multiple grows.

Can I mount an AC Infinity controller directly to this tent?

Yes. The CLOUDLAB 642 has an integrated controller mounting plate on the frame with a lightproof cable passthrough beside it. Your controller sits outside the canopy away from humidity, and the sensor and power cables run through the passthrough without breaking the light seal. No brackets, adhesive mounts, or taped-over cable holes required.

Does the 2-year warranty cover the canvas, poles, and zippers?

Yes. AC Infinity's 2-year warranty covers manufacturing defects across the full tent — canvas, steel poles, corner fittings, and zippers. It does not cover damage from misuse, overloading the frame beyond the 113kg rating, or normal wear from repeated assembly and disassembly.

Ready to build your 4x2?

The CLOUDLAB 642 is in stock at The Grow Guys. Our team is on hand if you want help sizing the fan, filter, and light to match.

View All AC Infinity

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed