Digi-Lumen Extreme 1000 mm Jumper Cable for UCL LED 200 W
DL-EXT-JC1M
- Handpicked by growers
- Ships today
- Real advice, real people
- 5,000+ high yielding customers
- 30-day returns*
- Free shipping over $499*
- Low stock - 1 item left
Pairs well with
Running more than one Digi-Lumen Extreme UCL 200W bar across your rows? The 1000mm Jumper Cable lets you daisy-chain bars together so multiple units run off a single power connection. At 1000mm length it covers the gap between bars positioned in adjacent rows without pulling tight or creating a trip hazard across the floor. Purpose-built for the UCL 200W system — not a workaround cable, a proper system component.
Specifications
- Check the maximum number of bars you can chain before the power draw exceeds your circuit rating — each bar draws 200W so three bars on one circuit is 600W total.
- If your rows are spaced further than 1 metre apart, consider routing the cable along the floor edge rather than diagonally across the walkway.
- For controlled environments where all bars need centralised scheduling, combine daisy-chaining with a Digi-Lumen ECO Smart Controller rather than running individual timers.
Pairs Well With
The bar this cable connects. You'll need one jumper cable per bar-to-bar connection in your daisy-chain run.
Digi-Lumen 3m Power Cord for UCL 200WThe 3m power cord feeds mains power into the first bar in your chain. One power cord plus multiple jumper cables runs the full row.
Digi-Lumen UCL Adjustable Stands (2 Pack)Raise each bar off the floor and angle the beam into the lower canopy. One 2-pack per bar keeps every unit stable and properly positioned.
Frequently Asked Questions
How many jumper cables do I need for multiple bars?
You need one jumper cable per connection between bars. Two bars need one jumper cable. Three bars need two jumper cables. The first bar in the chain connects to mains power via the 3m power cord — each subsequent bar connects to the previous one via a jumper cable.
Is 1000mm long enough for my row spacing?
For most standard grow tent and indoor room row spacings, yes. If your bars are positioned more than 1 metre apart you may need to route the cable along the floor edge rather than directly between bars, or reconsider bar placement. The 1m length is designed for bars in adjacent rows at typical hydroponic spacing.
Will this cable work with other Digi-Lumen products?
This cable is designed for the Extreme UCL 200W system specifically. It may not be compatible with other Digi-Lumen fixtures that use different connection formats such as the Halo series or Side Bar.
Chain Your Bars. Clean Up Your Setup.
1000mm RJ jumper cable for the Digi-Lumen Extreme UCL 200W system.
