Pairs well with
The 3m Power Cord is the mains connection point for the Digi-Lumen Extreme UCL 200W system. It runs from your wall outlet to the first bar in the setup, with an RJ cable that feeds into the bar's input port. At 3 metres it gives you enough reach to position the bar properly between rows without needing an extension lead. If you purchased the Underlight 200W bar without the Single Light Kit, this is the cable you need to power it up.
Specifications
- You only need one power cord per daisy-chain run regardless of how many bars you're running. Each additional bar links to the previous one via a 1m jumper cable.
- Route the power cord along the tent or room wall edge to keep the floor clear and reduce trip hazard risk in your grow space.
- If your outlet is more than 3 metres from where the first bar is positioned, use a proper rated extension lead rather than placing the first bar closer than ideal just to reach the outlet.
Pairs Well With
The bar this power cord is built for. If you bought the light-only variant this is a required purchase to get it running.
Digi-Lumen 1000mm Jumper Cable for UCL 200WOne power cord handles the mains connection. From there, 1m jumper cables link each additional bar in the chain.
Digi-Lumen UCL Adjustable Stands (2 Pack)Raise the bar off the floor and dial in beam angle. One pack per bar supports both ends and keeps positioning consistent across your setup.
Frequently Asked Questions
Do I need one power cord per bar?
No. You need one power cord per daisy-chain run, not per bar. This cord feeds mains power into the first bar — each subsequent bar in the chain connects to the previous one using a 1m jumper cable. If you're running two separate chains in different parts of the room, you'd need one power cord per chain.
Is this cord included with the Single Light Kit?
Yes. The Single Light Kit (available on the Extreme 200W product page) includes the light bar, adjustable stands, and a power lead. This cord is sold separately for growers who purchased the Underlight 200W bar on its own, or who need additional power cords for separate chain runs.
Is 3 metres long enough?
For most standard grow tents and indoor rooms, yes — 3 metres is enough reach from a wall outlet to the first bar position without an extension lead. If your outlet is further away than 3 metres, use a properly rated extension lead rather than moving the first bar to an inconvenient position just to reach the outlet.
Will this cord work with other Digi-Lumen products?
No — the RJ connector end is designed specifically for the Extreme UCL 200W system. Other Digi-Lumen products such as the Halo series use different connection formats and are not compatible with this cable.
Power Up Your UCL Setup
3m mains-to-bar power cord for the Digi-Lumen Extreme UCL 200W system.