Enviro-Pro Environmental Controller by Digi-Lumen — Temp, Humidity, CO₂ & VPD with 4-Channel Dimming
Enviro-Pro Environmental Controller by Digi-Lumen — Temp, Humidity, CO₂ & VPD with 4-Channel Dimming
Enviro-Pro Environmental Controller by Digi-Lumen — Temp, Humidity, CO₂ & VPD with 4-Channel Dimming
Enviro-Pro Environmental Controller by Digi-Lumen — Temp, Humidity, CO₂ & VPD with 4-Channel Dimming

Enviro-Pro Environmental Controller by Digi-Lumen — Temp, Humidity, CO₂ & VPD with 4-Channel Dimming

DL-ENV-CONTROLLER-PRO

$999.95
/
Shipping calculated at checkout.
  • Handpicked by growers
  • Ships today
  • Real advice, real people
  • 5,000+ high yielding customers
  • 30-day returns*
  • Free shipping over $499*
  • Low stock - 1 item left
  • Backordered, shipping soon

Pairs well with

The Digi-Lumen Enviro-Pro is an all-in-one environmental controller that runs your whole room from a single 5-inch touchscreen. It reads temperature, humidity, CO₂, VPD and light in real time through the included 4-in-1 sensor, then coordinates heating, cooling, humidity, CO₂ and up to four lighting zones to hold your targets steady. Ethernet and app control add remote monitoring and alarms, so you can dial in a tent or a small commercial room and leave it to run.

Real-Time 4-in-1 Monitoring The included BLS-4 sensor reads temperature, humidity, CO₂ and light. VPD, EC, pH and water temperature are covered too, with optional add-on modules.
4-Channel 0–10V Dimming Control up to four lighting zones independently in Manual, Auto Timer or Auto Cycle mode — plus PAR-based auto-dimming when a PAR sensor is connected.
4-Port Device Automation Assign each 240V port to heating, cooling, humidify, dehumidify or CO₂. Sunrise/sunset scheduling, fuzzy-logic CO₂ and smart locks keep it stable.
Touchscreen + App Control A 5-inch 800×480 display makes setup clear, and the built-in Ethernet port binds to the Digi-Lumen app for remote monitoring, control and alarms.

Specifications

Display
5" LCD, 800 × 480
Monitors
Temp, humidity, CO₂, VPD, light (EC/pH/water temp with modules)
Light Control
4 × 0–10V (30mA per channel)
Device Ports
4 × 240V (8A per port)
Operating Voltage
AC 100–240V, 50/60Hz
Max Input Current
10A
Sensor Port
RJ12 (RS485, 12V / 0.5A)
Network
RJ45 Ethernet (DHCP or manual IP)
Communication
RS485 (9600 baud, 8N1)
Operating Temp
0–50°C
Protection
IP20 (indoor use)
In the Box
Enviro-Pro, BLS-4 sensor, 5m RJ12 cable, splitter, mount kit
Getting accurate control
  • Mount the 4-in-1 sensor at canopy height and keep it out of direct light from the fixtures — direct light skews the temperature and photocell readings.
  • Set your targets by VPD rather than humidity alone, and let the controller coordinate humidify and dehumidify to hold the zone steady.
  • Use the smart locks (cooling and dehumidify, CO₂ and cooling, CO₂ and dehumidify) so devices do not fight each other and waste power.
  • CO₂ dosing pauses automatically in the dark, so there is no need to schedule around lights-off.

Getting Set Up

1
Mount the controller with the wall screws, or the U-bolt on your tent frame.
2
Connect the BLS-4 4-in-1 sensor via the 5m RJ12 cable, placing it at canopy height and out of direct light.
3
Assign each of the four 240V ports to a device — heater, cooler, humidifier, dehumidifier, or CO₂ gear.
4
Wire your 0–10V lights to the four dimming channels and choose Manual, Auto Timer, or Auto Cycle.
5
Bind the controller to the Digi-Lumen app by QR code over Ethernet for remote monitoring and alarms.

Pairs Well With

FAQ

What does it monitor?

Temperature, humidity, CO₂, VPD and light out of the box via the 4-in-1 sensor, plus EC, pH and water temperature with the optional ECPH module.

How many devices can it control?

Four 240V device ports — heat, cool, humidify, dehumidify, or CO₂ up/down — plus four independent 0–10V lighting channels.

Can I control it remotely?

Yes. It has a built-in Ethernet port and binds to the Digi-Lumen mobile app by QR code for remote monitoring and control.

Does it work with non-Digi-Lumen lights?

Yes. The four dimming channels use standard 0–10V, so any 0–10V dimmable fixture will work.

Is it waterproof?

No. It is IP20, rated for indoor use only — keep it dry and mounted away from direct water contact.

Total Control of Your Grow Environment

Temperature, humidity, CO₂, VPD and lighting from one touchscreen. Free shipping over $499*.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Growers First, Retailers Second

Welcome to The Grow Guys

We built The Grow Guys from the soil up — well, coco and perlite. Before we sold gear, we bought it, ran it, and learned the hard way what's worth the money and what ends up in the shed. That's the filter everything on our shelves passes through. No sales scripts, no rebadged junk, no telling you what you want to hear. Just gear we'd run ourselves and advice from people who actually grow. Chasing higher yields, tighter flowers, or your first harvest? You're in the right place.

Meet The Grow Guys

FAQs

Order by 2pm and it ships the same business day from Invermay, Tasmania.

Calculated at checkout by weight and destination. Free shipping over $499*.

Plain packaging, no branding. No one knows what's in your box.

30-day change-of-mind returns on unopened, unused products. A 10% restocking fee applies and return shipping is at your cost.

Call, email, or walk into the Invermay shop. You'll get a grower on the other end, not a script.

Unit 10/110 Gleadow Street, Invermay 7248. Mon–Fri 8:30am–5:30pm, Sat 9am–3pm.

You may also like

Recently viewed