Zeus 600W PRO 3.1 LED Grow Light by Lumatek

🌞 “More photons, less drama”

Let your canopy bathe in brilliance — the Zeus 600W PRO 3.1 cranks out 1990 µmol/s PPF at a punishing 3.1 µmol/J efficacy, all while covering a 1.5 × 1.5 m footprint with solid uniformity. It’s built for growers who want top-tier output and energy sense.

🔋 What Makes It a Powerhouse

• 🏹 High‑efficacy LEDs: Osram red diodes push ~4.3 µmol/J, Samsung whites ~3 µmol/J

• 💧 Clear glue protective coating: ~99 % transmittance, corrosion resistance, IP65 protection

• 🧲 Modular magnet bars: 6 × 100W PRO 3.1 bars (replaceable) make assembly, maintenance, and spectrum tweaking easier

• 🧊 Passive thermal design: Lower junction temps = longer life

• 🎛️ Dimmable (OFF / 25 / 50 / 75 / 100 %) via 0–10V dimmer (included)

• 📡 External control compatible: works with Lumatek controllers or any universal 0–10V systems

• ⏱ Long life: L90 at 60,000 hours

• 🛡 Warranty & certs: 5 years, CE / EMC / LVD / RCM etc.

🛠️ How to Use & Set Up

1. Mount the fixture ~30–50 cm above canopy for flowering (adjust as needed).

2. Use the included 0–10V dimmer to dial back during veg or early flower without spectrum loss.

3. If you’ve got a modern lighting controller, daisy-chain multiple Zeus units via 0–10V control.

4. Swap in optional UV / Far‑Red bars if you want to tweak spectrum for specific phases (e.g. extra red or UV stress).

5. Ensure good air circulation — even passive designs appreciate airflow across the bars.

🌱 Grow Guys’ Pro Tips

• Start at ~65–75 % output during first week of flower, then ramp to 100 %

• Use the modular design to replace a failed bar instead of the whole fixture (saves $$)

• If your grow room runs hot, mount the driver remotely to keep canopy temps in check

• Try staggering the height a little: lower central bars can boost uniformity in wider tents

🎯 Perfect Situations

• 1.5 × 1.5 m or similar tents where you want a single, high‑output fixture

• Multi‑layer or bench systems (modular bars help with depth)

• Commercial setups needing scalable control across many fixtures

• Hobby setups where you want top performance without over‑engineering

📊 Spec Sheet at a Glance

🚀 “Light it up and let your plants shine”

Chuck this into your grow setup and watch it transform your room from “meh” to “monster yield arena.” Add it to your cart and get ready to raise the bar (literally).