Battery CO2 Monitor by AZ — CO2, Temperature, Humidity & Dew Point Meter
AZ-METER-CO2-7732
Earn 199 points with this purchase
A battery-powered monitor that shows CO2, temperature, humidity and dew point on one screen. It runs for about a year on three AAAs, with no power point or app needed.
- Handpicked by growers
- Ships today
- Real advice, real people
- 6,736+ high-yielding customers
- 30-day returns*
- Free shipping over $499*
- Low stock - 1 item left
- Backordered, shipping soon
Pairs well with
Adding CO2 without measuring it is guesswork. The AZ 7732 is a battery-powered monitor that shows CO2, air temperature, humidity and dew point on one screen, using an NDIR sensor that reads from 0 to 9,999 ppm. It runs for more than a year on three AAA batteries, so it hangs or stands anywhere in the room with no power point to find. It suits growers running CO2 bags, pads or a bottle who want a real number, and anyone checking whether a room is getting enough fresh air. It is a monitor only: it will not switch a regulator or a fan, and at IP30 it needs to stay clear of spray and condensation.
Specifications
Grower's Tip
- Running a sealed room with added CO2? Use the manual fresh-air calibration. Automatic calibration works from the lowest reading of the past week and assumes the room drops back to fresh-air levels. An enriched room never does, so the reading drifts.
- Read it at canopy height, where the plants are using the CO2, and keep it away from the outlet of your CO2 source.
- Do not breathe on it while you check it. Your breath will spike the number for a few minutes.
- Judge the room on the 24-hour average and peak, not the live number. One reading tells you about one moment.
- Use regular mode while you are dialling a room in, then switch to eco mode to get the full year from the batteries.
- Keep it clear of foliar spray, humidifier mist and anything that drips. IP30 means no protection against moisture.
How To Set It Up
Pairs Well With
For when you want CO2 switched for you, not just measured. It doses to a set ppm.
CO2 Generator by The Green PadHumidity-activated CO2 pads for tents. The monitor shows you what they are adding.
CO2 Regulator by Pro LeafFor bottled CO2. Set the flow, then check the result on the monitor.
VPD Thermometer by AC InfinityLeaf surface temperature and VPD, the two readings this monitor does not give you.
Grow Room MonitorsThermo-hygrometers, cameras and sensors for keeping an eye on the room.
Frequently Asked Questions
Does it control my CO2 system?
No. It is a monitor only. It reads and displays CO2 but has no output to switch a regulator, generator or fan. For automatic dosing, look at the CO2 Controller by AC Infinity.
Can I use it in a sealed room with added CO2?
Yes. It reads up to 9,999 ppm. In a sealed room, calibrate it manually in fresh outdoor air, because automatic calibration expects the room to return to fresh-air levels at some point each week.
Does it need mains power?
No. It runs on three AAA batteries for more than a year in eco mode, or more than six months in regular mode.
Are batteries included?
Yes. Three AAA batteries come in the box, along with the hanging screw set and the manual.
Is it waterproof?
No. It is rated IP30, which gives no protection against water. It works in humidity up to 95% RH as long as nothing condenses on it, so keep it away from spray, mist and drips.
Does it keep a record of past readings?
Yes, a short one. One key press shows the 8-hour average, the 24-hour average and the 24-hour peak on the screen.
Does it have an alarm?
Yes. There is a buzzer of about 70 dB that you can switch on when you want it and mute when you do not.
How accurate is the CO2 reading?
Within ±50 ppm ±3% of the reading between 400 and 5,000 ppm, and within ±10% of the reading from 5,001 to 9,999 ppm. Accuracy below 400 ppm is not specified by AZ.
Know Your CO2 Before You Add More
CO2, temperature, humidity and dew point on one battery-powered screen. Free shipping over $499*.