4-in-1 Sensor by VIVOSUN — CO₂, Temperature, Humidity & Light Sensor for the GrowHub E42A+
VSN-SENSOR-CO2S4
Earn 84 points with this purchase
Adds CO₂ and light on/off sensing to the GrowHub E42A+, on top of temperature, humidity and VPD. Plugs into the controller's sensor port. E42A+ only.
- Handpicked by growers
- Ships today
- Real advice, real people
- 6,759+ high-yielding customers
- 30-day returns*
- Free shipping over $499*
- Low stock - 3 items left
- Backordered, shipping soon
Pairs well with
Temperature and humidity only tell you half of what the canopy is doing. The 4-in-1 Sensor by VIVOSUN adds CO₂ and light on/off detection to the readings your GrowHub E42A+ already takes, so the controller can see when CO₂ is running low in a closed-up tent, or when a light has not switched when it should. It swaps in for the standard probe on the controller's 2.5mm sensor port, hangs on a 3m cable, and reads CO₂ from 0 to 40,000 ppm with an NDIR sensor. It suits growers already running an E42A+ who want CO₂ on the screen and in their fan or CO₂ triggers. The honest limits: it works with the E42A+ only, the light reading is on or off and not a PAR or lux figure, and it measures CO₂ without adding any.
Specifications
Grower's Tip
- Hang it about 10cm above the canopy, which is where VIVOSUN's manual puts it, and lift it as the plants grow.
- Keep it out of the direct airstream of your fans and away from any CO₂ outlet, so it reads the air the plants are sitting in.
- Calibrate the CO₂ reading once a month. VIVOSUN's method is to take the sensor outdoors to a well-ventilated spot, let it settle for 3 minutes, then run CO₂ calibration from the controller.
- VIVOSUN's manual lists reference CO₂ levels of 400 ppm at germination, 600 for seedlings, 800 in veg and 1000 in flower. Treat them as a starting point: the right level is plant-specific and depends on your light and temperature.
- The light reading only tells you on or off. To measure intensity at the canopy you still need a PAR meter.
- Keep it dry. VIVOSUN rates it for up to 90% RH and warns against excessive moisture, so move it out of the way before foliar spraying.
How To Set It Up
Pairs Well With
The controller this sensor is made for. Without an E42A+ the sensor has nothing to plug into.
AeroStream H19 HumidifierAdds moisture when the sensor shows VPD climbing, and runs in the same VIVOSUN app.
AeroDrain D12 DehumidifierPulls up to 12L a day out of the tent when you are keeping it closed up to hold CO₂ in.
AeroFlux 700W HeaterHolds night temperatures up so the readings you are tracking stay inside your targets.
CO2 ControllersStandalone CO₂ controllers and monitors for rooms that are not running a GrowHub.
Frequently Asked Questions
Does it work with the GrowHub E42 or E42A?
No. VIVOSUN lists the GrowHub E42A+ as the only compatible controller. If you are not sure which one you have, the E42A+ has a 4.3" colour screen and the model number GH-E42AP.
Does it replace the probe that came with my E42A+?
Yes. It uses the same 2.5mm sensor port, so the standard probe comes out and this goes in. You keep temperature and humidity and gain CO₂ and light detection.
Does it measure light intensity?
No. It detects whether the light is on or off. It does not give a PAR, PPFD or lux figure, so use a PAR meter to set light height and dimming.
Does it add CO₂ to the tent?
No. It measures CO₂ and reports it to the controller. Raising CO₂ takes a separate CO₂ source, and lowering it takes fresh air from your exhaust fan.
Do I need to calibrate it?
Yes. VIVOSUN recommends calibrating CO₂ once a month: take the sensor outdoors to a well-ventilated spot, let it settle for 3 minutes, then run CO₂ calibration from the E42A+ controller.
Is it waterproof?
No. VIVOSUN's manual warns against excessive moisture and rates it for operation up to 90% RH. Keep it clear of misting and foliar sprays.
How accurate is it?
VIVOSUN's published figures are ±0.8°C for temperature, ±6% RH for humidity and 50 ppm ±5% for CO₂.
Does it come with a warranty?
Yes. It carries VIVOSUN's 2-year manufacturer warranty.
See CO₂ At The Canopy
Add CO₂ and light sensing to your GrowHub E42A+. Free shipping over $499*.