Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W
Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W

Tube Heaters by Cultiv8 — IP55 Grow Room Heat Bars, 60W to 300W

CULTIV8-TUBE-60W

Regular price$49.95
/
Shipping calculated at checkout.

Sealed IP55 radiant heat bars in six sizes from 60W to 300W — silent background warmth for grow spaces from 2m³ to 7m³. Mounts to floor or wall, pairs with a thermostat for set-and-forget control.


Wattage
  • Handpicked by growers
  • Ships today
  • Real advice, real people
  • 5,000+ high yielding customers
  • 30-day returns*
  • Free shipping over $499*
  • Low stock - 2 items left
  • Backordered, shipping soon

Cold nights are where grows go wrong — growth stalls, roots sulk, and the condensation that follows invites mould in. The Cultiv8 Tube Heater is a sealed radiant heat bar that holds your grow area in the goldilocks zone with gentle, silent background warmth. Six sizes run from a 30cm 60W bar for a propagation cabinet up to a 150cm 300W bar for a 7m³ room, and every one mounts to the floor on its included feet or straight onto a wall — no fan, no noise, no floor space sacrificed.

Run it on a controller. A tube heater runs flat out whenever it's powered, and the tube surface sits at 91–96°C in operation. Pair it with a plug-in thermostat like the Cultiv8 Thermostat and it becomes a set-and-forget heater that only draws power when the temperature actually dips.
Holds The Goldilocks ZoneSteady ambient warmth keeps plants out of cold-stress territory, so you don't lose a week of growth to one cold snap or shock the root zone overnight.
Keeps Mould Off The MenuA few degrees of warmth stops overnight condensation forming on leaves and tent walls — the moisture that powdery mildew and Botrytis wait for.
Cheap To Run All NightAt 60–300W it sips power compared to a fan heater cycling all night, and with no fan or moving parts it runs in complete silence.
IP55 Sealed For Grow SpacesProtected against dust and water splash, so the humidity, misting and occasional spill of a working grow tent or greenhouse won't hurt it.
Six Sizes, 2m³ To 7m³From 60W/30cm for a propagation cabinet to 300W/150cm for a full room — match the bar to the volume you're heating instead of paying for watts you don't need.
Safe By DesignAn auto-reset thermal cut-out kills power if the tube overheats, and the included feet and brackets keep the hot surface off floors and walls.

Specifications

Brand: Cultiv8
Type: Radiant tube heater (heat bar)
Power options: 60W / 80W / 120W / 180W / 240W / 300W
Tube lengths: 30 / 60 / 60 / 90 / 120 / 150cm
Coverage guide: ≤2 / 2–3 / 3–4 / 4–5 / 5–6 / 6–7 m³
Electrical: 220–240V, 50Hz — standard AU plug
Ingress rating: IP55 (dust and splash protected)
Surface temperature: ~91–96°C in operation
Safety: Auto-reset thermal cut-out
Mounting: Floor or wall — feet and brackets included
Clearances: 30mm under tube; 200mm above a wall-mounted tube
Control: Pairs with plug-in thermostat controllers
Warranty: 12 months

Grower's Tip

  • Mount the bar low along the coldest wall of the space. Radiant heat rises through the canopy from below — a bar mounted high just warms the ceiling.
  • Set your thermostat probe at canopy height, not next to the tube. You're controlling the temperature your plants feel, not the air 30mm from a 90°C surface.
  • Add a small circulation fan. It evens out the warm layer that forms above the bar and stops a toasty ceiling sitting over a cold floor.
  • Skip the timer. A tube heater on a timer heats by the clock, not the temperature — a thermostat costs about the same to run, holds an actual set point, and switches the bar only when it's needed.

How To Mount And Dial It In

1Pick your size by the volume you're heating: 60W for up to 2m³, 80W for 2–3m³, 120W for 3–4m³, 180W for 4–5m³, 240W for 5–6m³, 300W for 6–7m³. Caught between two sizes with a thermostat in play? Go bigger — it just reaches the set point faster.
2Fit the mounts. On the floor, the feet hold the tube with its minimum 30mm clearance — never rest the tube directly on the floor. On a wall, keep at least 200mm of clear space above the tube and 30mm behind it.
3Secure the tube in its mounts before you switch anything on — it should never run loose. Keep the power cord clear of the tube and keep fabric, dripper lines and anything flammable well away.
4Plug it into your thermostat controller, hang the probe at canopy height, and set your minimum temperature.
5Expect a faint vapour for the first five minutes of the very first run — that's the production coating on the element burning off, and it's normal. Check your min/max thermometer after the first cold night and nudge the set point from there.

Pairs Well With

Frequently Asked Questions

Which wattage do I need?

Match the bar to the volume you're keeping warm: 60W covers up to 2m³, 80W does 2–3m³, 120W does 3–4m³, 180W does 4–5m³, 240W does 5–6m³ and 300W does 6–7m³. A standard 1.2 x 1.2 x 2m tent is about 2.9m³ — an 80W or 120W bar. If you're between sizes and running a thermostat, go up a size; it costs nothing in practice because the controller stops it overshooting.

Does it hold a set temperature on its own?

No — plugged straight into the wall it simply runs. The built-in thermal cut-out is an overheat safety, not a thermostat. Pair it with a plug-in controller like the Cultiv8 Thermostat, set your minimum temperature, and it becomes fully automatic.

Mine gave off a smell on first use — is that normal?

Yes. The heating element is coated with a small amount of lubricant oil during production, and the first run burns it off as a faint vapour for around five minutes. It's expected behaviour, not a fault, and it doesn't come back.

Is it safe inside a humid grow tent?

Yes — the IP55 rating protects it against dust and water splash, which is exactly what a working grow tent throws at it. The limits: it's not built for outdoor use in damp weather, and it must never be submerged. Inside a tent or greenhouse on its mounts, it's in its element.

Can I sit it on the tent floor?

On its feet, yes — that's what they're for. Never lay the tube directly on the floor: the surface reaches 91–96°C in operation and the feet exist to hold that heat 30mm clear of whatever's underneath. Keep the power cord from touching the tube and don't cover the bar with anything.

Tube heater or heat mat — which do I want?

They do different jobs. A heat mat warms the root zone directly under trays and pots; a tube heater lifts the air temperature of the whole space. For propagation in a cold room, the strongest setup is both — a mat under the dome and a tube bar holding the ambient, each on its own controller.

Select Your Size

Keep Cold Nights Off Your Plants

Silent IP55 radiant heat in six sizes from 2m³ to 7m³ — floor or wall mounted, thermostat-ready. Pick your size above. Free shipping over $499*.

Shop All Heaters

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Growers First, Retailers Second

Welcome to The Grow Guys

We built The Grow Guys from the soil up — well, coco and perlite. Before we sold gear, we bought it, ran it, and learned the hard way what's worth the money and what ends up in the shed. That's the filter everything on our shelves passes through. No sales scripts, no rebadged junk, no telling you what you want to hear. Just gear we'd run ourselves and advice from people who actually grow. Chasing higher yields, tighter flowers, or your first harvest? You're in the right place.

FAQs

Order by 2pm and it ships the same business day from Invermay, Tasmania.

Calculated at checkout by weight and destination. Free shipping over $499*.

Plain packaging, no branding. No one knows what's in your box.

30-day change-of-mind returns on unopened, unused products. A 10% restocking fee applies and return shipping is at your cost.

Call, email, or walk into the Invermay shop. You'll get a grower on the other end, not a script.

Unit 10/110 Gleadow Street, Invermay 7248. Mon–Fri 8:30am–5:30pm, Sat 9am–3pm.


Recently viewed