GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture
GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture

GL650W+ LED Grow Light by Treegers — 650W Full-Spectrum Modular Fixture

TRG-LED-FIX-650W

Regular price $1,350.00 Sale price$1,229.95 Save $120.05
/
Shipping calculated at checkout.

  • Low stock - 1 item left
  • Backordered, shipping soon
  • Free shipping on orders over $499*

The GL650W+ sits between the GL420W and the GL1000W+ in the Treegers range — and it covers the sweet spot for serious 1.5 x 1.5m grows. Six magnetic easy-click LED bars, 2009 μmol/s PPF at 3.1 μmol/J fixture efficacy, Full-Spectrum HybridF+ tuned for maximum flowering performance, and passive cooling that runs completely silent. The GL+ series steps up from the standard GL420W in both efficacy and the modular frame design that makes servicing, assembly, and driver positioning genuinely simple. Backed by a 5-year warranty that reflects exactly how much confidence Treegers has built into it.

2009 μmol/s PPF Output Intense, even coverage across a full 1.5 x 1.5m canopy. More than enough to drive high-demand flowering crops at peak intensity.
3.1 μmol/J Fixture Efficacy The GL+ series steps up from 2.8 μmol/J on the standard GL420W. More usable light per watt — the power bill notices the difference at 650W.
Full-Spectrum HybridF+ Deep Red enhanced spectrum designed for maximum flowering performance across the full growth cycle — not the balanced Fusion spectrum on the smaller fixtures.
Magnetic Easy-Click Bars Six bars that attach and detach without tools. Individual bar replacement if ever needed. Flat-pack shipping that protects the fixture in transit.
91%+ Output at 50,000 Hours Less than 10% light decay over 5 years under normal operating conditions. Tested, measured, and backed by a 5-year warranty to match.
IP66 Rated — Silent Running Full dust and water protection. Silicone resin diode coating, passive cooling throughout, zero fans. Built for the long haul.

Tech Specs

Product Code: TGL0003
EAN / GTIN: 9309001188054
Power Draw: 650W ±5%
PPF Output: 2009 μmol/s
Fixture Efficacy: 3.1 μmol/J
Diode Efficacy: Up to 4.70 μmol/J
Coverage Area: 1.2 x 1.2m – 1.5 x 1.5m
Input Voltage: 120–277V / 50–60Hz
Dimming: 0–100% (via compatible controller)
Light Distribution: 120°
Thermal Management: Passive Cooling
Ingress Protection: IP66
LED Bars: 6-bar modular design (magnetic easy-click)
LED Lifetime: 60,000+ hours
Fixture Dimensions: 1090 x 1090 x 100mm
Fixture Weight: 11.35kg
Gross Weight: 12.5kg
Spectrum: Full-Spectrum HybridF+
Certifications: CE, UKCA, RCM, RoHS, SAA
Warranty: 5 Years

What's in the Box

6x High-Powered LED Bars Magnetic easy-click bars that attach to the frame without tools. Flat-packed for safe shipping.
1x 650W High-Grade Driver Industry-leading LED driver rated for long-term reliability at full 650W output. Designed for remote mounting via included support brackets.
1x Frame Kit 4-piece frame with all cabling included. Assembles to the full 1090 x 1090mm footprint.
2x Driver Support Brackets For mounting the driver remotely — outside the tent or on a wall — to keep the heat source away from the canopy.
1x Power Cable 1.8m cable with plug and Jnicon connector — ready to run.
2x Stainless Cable Hangers + User Guide D2 x 105mm stainless hangers for a secure hang. User guide covers assembly, setup, and maintenance.
GL650W+ Setup Notes — Read Before You Hang
  • A controller is required for dimming — the GL650W+ runs at full 650W output without one. Connect the Precise T Dimmer, Growcast, or any compatible 0–10V universal controller before powering on.
  • At 11.35kg, this fixture needs a solid, load-rated hanging point. Confirm your tent or ceiling mount is rated for the weight before installation.
  • The driver is designed for remote mounting — use the included support brackets to position it outside the tent or on a wall panel. This keeps the driver heat source out of the growing environment.
  • Need more than the stock cable distance between the driver and frame? The GL650W+ Driver Extension Kit (sold separately) gives you 3 metres of clearance.
  • The HybridF+ spectrum has a Deep Red bias for flowering. It still supports veg and propagation — but if you're running exclusively in early veg or clone stages, the GL420W or GL300W with standard Fusion spectrum may be a better fit.

How to Set Up the GL650W+

1
Assemble the frame — Connect the four frame sections on a flat surface before hanging. The frame is designed for tool-minimal assembly. Click the six LED bars onto the frame magnetically once the frame is assembled — it is easier to do on the ground than in the air.
2
Mount the driver remotely — Use the two included support brackets to fix the driver on a tent wall, equipment rail, or adjacent surface outside the canopy area. The driver generates heat — keeping it out of the tent reduces thermal load on your exhaust system.
3
Hang the fixture at the correct height — Start at 50–70cm above the canopy for veg and ramp up intensity before lowering. In flower, drop to 40–60cm as the canopy establishes and proves it can handle the intensity. Use the stainless cable hangers with a ratchet system for easy adjustment.
4
Connect your controller and start at reduced intensity — Plug in the T Dimmer or Growcast and begin at 40–60% output. Ramp up gradually as the canopy develops. Running the full 2009 μmol/s from day one on an immature canopy wastes energy and risks light stress.
5
Ensure proper ventilation — At 650W, your room's thermal load is significant even with passive bar cooling. A well-sized inline fan and carbon filter setup is essential. Ensure the remotely mounted driver also has airflow around it, not just the fixture frame.

Pairs Well With

Treegers Growcast Controller

The recommended controller for the GL650W+. Automates scheduling, sunrise/sunset ramps, and PPFD targeting via the Telos app — no WiFi needed.

Treegers Precise T Dimmer

Prefer manual control? The T Dimmer connects directly to the GL650W+ for simple 10% step dimming without an app or scheduling.

GL650W+ Driver Extension Kit

Need more than stock cable distance between the driver and frame? The extension kit gives you 3 metres of clearance without voltage loss.

Treegers Fixture Link Cable

Running multiple GL650W+ fixtures from one controller? You need one Fixture Link Cable per additional light in the chain.

Treegers Quantum PAR Meter

Map actual PPFD across the 1.5m canopy footprint. Confirms your fixture height and dimmer setting are delivering what your plants actually need.

Inline and Exhaust Fans

650W demands proper extraction. Size your inline fan to handle the thermal load — this fixture requires a well-spec'd ventilation setup.

Frequently Asked Questions

What is the difference between the GL650W+ and the GL420W?

The GL420W covers up to 1.2 x 1.2m at 1155 μmol/s PPF with standard Full-Spectrum Fusion. The GL650W+ covers up to 1.5 x 1.5m at 2009 μmol/s PPF with Full-Spectrum HybridF+ — a Deep Red enhanced spectrum biased toward maximum flowering performance. The GL650W+ also uses the modular GL+ frame with remote driver mounting. It is a step up in output, coverage, efficacy, and flowering-specific performance.

What is Full-Spectrum HybridF+ and how is it different from Full-Spectrum Fusion?

Full-Spectrum Fusion (GL300W, GL420W) is a balanced spectrum equally suited to veg, propagation, and flower. Full-Spectrum HybridF+ (GL650W+, GL1000W+) adds a Deep Red enhancement that pushes the spectrum toward maximum flowering performance — making it the better choice for growers focused on heavy-flowering crops. Both support full-cycle growing, but HybridF+ is tuned for the flowering stage specifically.

Does the GL650W+ come with a dimmer or controller?

No — a controller is sold separately. Without one, the GL650W+ runs at full 650W output. Connect the Treegers Precise T Dimmer, Growcast, or any compatible 0–10V universal controller via the LLT M12 control port to enable dimming.

Can the driver be mounted remotely?

Yes — the GL650W+ is designed for remote driver mounting using the included support brackets. The stock cabling provides a standard distance between driver and frame. If you need the driver positioned further away, the GL650W+ Driver Extension Kit provides 3 metres of additional reach.

How does the modular design work?

The GL650W+ uses six magnetic easy-click LED bars that attach to and detach from the frame without tools. If a bar is damaged it can be replaced individually without returning the entire fixture. The frame assembles from four sections and ships flat-pack to reduce transit damage risk.

What warranty does the GL650W+ carry?

The GL650W+ carries a 5-year manufacturer warranty from Treegers — the same extended coverage as the GL1000W+. Note that the warranty excludes damage from high sulphur environments, as sulphur-based products can cause diode vulcanization. Take precautions if you use airborne sulphur pesticides or fertilizers in your grow space.

650W. 2009 μmol/s. 5-Year Warranty.

The GL650W+ is the serious grower's fixture for a 1.5 x 1.5m room — built to run hard, last long, and deliver the flowering performance the HybridF+ spectrum was designed for. Questions about setup, compatibility, or your room? The Grow Guys team is here.

Shop All Treegers

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed